Search results: ws7040

Sort order

34 models

P
PrintablesDan Cernogorsky

RatRig V-Core WS7040 CPAP Fan Shelf Mount

The FAN RETURN can be used with or without the following HEPA filter cartridge. https://a.co/d/hSXwPuz The HEPA filters main purpose is for noise attenuation. Use the “FILTER_BLANK” if not using the filter or use…

Downloads
701
Likes
137
Rating
4.6
P
Printablesjphalip

WS7040 CPAP fan mount for aluminum extrusion (Voron 2.4 compatible)

This is a mount for the WS7040 fan and its driver PCB. It is meant to fit on an aluminum extrusion. Tested to fit a Voron 2.4 but could probably fit several other printers as well. I've tested it to fit at the back of a Voron 2.4's gantry…

Downloads
401
Likes
83
Rating
0
P
PrintablesNecropaw

Compression Fitting for CPAP hose on WS7040 blower fan

The cap can be printed in any material and without any supports, if it is flipped upside down. For the adapter use TPU. I used SainSmart TPU with 95A shore. I added a cable tie for extra security, but the friction should be strong enough…

Downloads
264
Likes
42
Rating
4.5
P
Printablesdemek

CPAP WS7040 driver DIN rail enclosure

Nice fitting enclosure for CPAP cooling fan driver with din rail mount. Mount taken from Voron Design. Designed for self tappered m2x10 SHCS (4 pieces), but you can edit STEP file for your need.

Downloads
263
Likes
45
Rating
5
P
Printablesskyaee

WS7040 CPAP fan mount Voron

The ws7040 fan has not found a better way, so I designed this simple version of the fan mounting base, the driver board is installed behind, if you have a better idea, please let me know. Installation requirements: If the fan is installed…

Downloads
256
Likes
57
Rating
0
P
PrintablesVitalii3D

WS7040 Centrifugal Blower Fan Mount

Easy way to attach WS7040 to wall using two side tape or bolts. First attach fan to mount using 3 screws then attach mount to one of panels using 2 side tape or bolts. In my case tape works without any issues for 2 months.

Downloads
249
Likes
45
Rating
0
P
Printablessartirious

Voron Exhaust Assembly WS7040 CPAP

I wanted to incorporate remote part-cooling, while also retaining the slight negative chamber pressure that was generated by the exhaust fan.

Downloads
197
Likes
48
Rating
0
P
PrintablesLadPack91

WS7040 CPAP Fan Hose Adapter

This adapts the 7040 fan output to a 15mm tube commonly used in CPAP tubing (no rubber grommet)

Downloads
195
Likes
19
Rating
0

10WS7040 CPAP Blower Fan Model and Board Holder

UPDATE V1.1: I noticed some things weren't reflected in the model. FIxed and reuploaded. Reference model of CPAP blower fan model 10ws7040 often sold by Mellow as a part cooling solution. You can get this fan here:…

Downloads
156
Likes
9
Rating
0
P
PrintablesDrak

V2 Cpap Duct Creality K1 WS7040 - Drak

Changelog (day/month/year): 15.02.2026 - I’ve made the design free (open price) and changed license to Public Domain. You can support my work on Cults3D by donating any amount, or by paying any of my models on Printables Store on Cults3D…

Downloads
138
Likes
47
Rating
0
P
PrintablesNecropaw

WS7040 fan alu extrusion mounting bracket

A simple solution to mount a WS7040 fan to an aluminium extrusion. Includes a housing for the PCB, too. This is designed with a BLV mgn cube in mind, but can be used on others, too. Needed screws: PCB: 4x M2x6mm self tapping screws and 2x…

Downloads
130
Likes
18
Rating
5
P
PrintablesDrak

CPAP Box Mount WS7040 Cooling Turbine Fan - Drak

Hardware: 12x M3 8mm Screw (for BOX and Board Cover) 12x M3 4mm Voron Heat Insert (for BOX and Board Cover) 3x M3 8mm Self Tapping Screw (for CPAP Mount) The printer in action --- Commercial Use --- By purchasing this design on Cults ,…

Downloads
118
Likes
30
Rating
0
P
Printableszfactor

WS7040 CPAP Fan Enclosure

I had issues with the heat insert holes being too small causing pushed out plastic, and wanted to use it with a 20mm hose. I also fixed an issue where the corner holes in the fan cage had walls too thin to print. Designed to be used with…

Downloads
111
Likes
13
Rating
0
P
PrintablesDrak

K1 Cpap Duct WS7040 Creality - Drak

Changelog (day/month/year): 15.02.2026 - I’ve made the design free (open price) and changed license to Public Domain. You can support my work on Cults3D by donating any amount, or by paying any of my models on Printables Store on Cults3D…

Downloads
111
Likes
38
Rating
0
P
PrintablesScootworks

CPAP WS7040 driver enclosure/housing - DIN Rail Mount

Nice fitting enclosure for CPAP fan driver.

Downloads
103
Likes
9
Rating
0
P
PrintablesDrak

Cpap Fan Mount Creality K1 WS7040 - Drak

Hardware: x8 M3 8mm x8 M3 Voron Heatinsert x4 M2 Selftapping (for board) x3 M2.5 Selftapping (for cpap) Hello, I designed the Jaw Mount. That mount and cpap duct was designed for my friendo and it worked for him. The design needs very…

Downloads
83
Likes
35
Rating
0
P
PrintablesM1150

WS7040 CPAP Fan Mount for 2020 Extrusions

This is a remix of Dan Cernogorsky's WS7040 CPAP fan mount to fit 2020 extrusions, rather than the 3030 extrusions used on the Rat Rig V-Core series. It also integrates the included cable and hose guide for compactness. The width of the…

Downloads
70
Likes
10
Rating
0
P
PrintablesAuggie

Mellow WS7040 Fan Cage Cover

Mellow's WS7040 follows this drawing: https://ae01.alicdn.com/kf/S4f4b703484754fffb45822f4229b5e24i.jpg The WS7040 that the original Dan Cernogorsky has a slightly different position for the 3 mounting points.

Downloads
59
Likes
13
Rating
0

CPAP Fan Housing for WS7040 Blower

This is a mounting enclosure for the WS7040 blower fan that mounts to the 2020 or 3030 extruded frame. The lid is designed for the M3 heat inserts. It has a adapter for the standard sized CPAP hose about 18mm internal diameter. Fasteners:…

Downloads
52
Likes
6
Rating
0
P
PrintablesBubbles2Legs

WS7040 CPAP hose adapter

A simple 90 degree cpap hose adapter specifically designed to work with https://www.printables.com/model/537863-ws7040-cpap-fan-mount-voron . Install: The blower side is purposely tight to be heat formed for a tight fit. Slowly and evenly…

Downloads
47
Likes
10
Rating
0
P
PrintablesOLEGator Screb

Creality K1 CPAP / WS7040 KVAKY printhead for k1 series

I use my k1 with chc pro (so for unicorn you need to make it longer for 2mm) And also i don't use mcu on a head, so i am not sure that it will fit to the stock k1. prints without supports

Downloads
44
Likes
7
Rating
0
P
PrintablesEnderEnder

CPAP WS7040 remote cooling fan mount box for Creality Ender-7

CPAP WS7040 remote cooling fan mount box for Creality Ender-7

Downloads
40
Likes
9
Rating
0
P
PrintablesKazooie

RatRig Vcore - WS7040 CPAP - Rework size for 300.

Remix of the “Fan Return” air part section for deal with panel screws & some tweaks.

Downloads
35
Likes
10
Rating
0
P
PrintablesM1150

VzBot CPAP Muffler Adapter for WS7040 Fan Shelf Mount

Created this adapter for the VzBot CPAP muffler as I was experimenting with controlling the noise from my printer. I had already remixed and installed a modified mount for Dan Cernogorsky's CPAP box but wanted to try the CPAP muffler, so…

Downloads
31
Likes
5
Rating
0
P
PrintablesSynthead

Integrated flap valve-gated WS7040 blower CPAP parts cooler

Here's a flap valve-gated, WS7040-powered CPAP blower for precise and powerful parts cooling! The WS7040 electronics are integrated right in the model, and the flap valve uses a Creality Ender 3 stepper motor that you might already have…

Downloads
30
Likes
10
Rating
0
P
PrintablesActinaria

Voron Exhaust Assembly WS7040 CPAP modification to add filter

Added ability to use included inlet filter and cutout so that risers are not required to mount board.

Downloads
17
Likes
2
Rating
0
P
PrintablesTorxFighter

Wonsmart WS7040 Cpap muffler (WIP)

Cpap muffler i made to fit my own custom build. Maybe some of you can use it for your own build. Has not been tested on a printer yet but i dont see why it shouldn't work. Here are some of the thing you need to order for it to be built.…

Downloads
17
Likes
5
Rating
5
P
Printablesparticlenoah

Din rail bracket - WS7040 Driver pcb (heated inserts)

This a remix for WS7040 Driver PCB. Mounts via M2 Scres to M2 brass inserts.

Downloads
15
Likes
4
Rating
0
P
PrintablesGareth42

WS7040 Driver Board Mount for FLsun

A small board to mount the driver for a WS7040 blower fan often used for CPAP cooling.

Downloads
12
Likes
1
Rating
0
P
Printables

Integrated flap valve-gated WS7040 blower CPAP parts cooler

Here's a flap valve-gated, WS7040-powered CPAP blower for precise and powerful parts cooling! The WS7040 electronics are integrated right in the model, and the flap valve uses a Creality Ender 3 stepper motor that you might already have…

P
Printables

K1 Cpap Duct WS7040 Creality

Changelog (day/month/year): 15.02.2026 - I’ve made the design free (open price) and changed license to Public Domain. You can support my work on Cults3D by donating any amount, or by paying any of my models on Printables Store on Cults3D…

P
Printables

V2 Cpap Duct Creality K1 WS7040

Changelog (day/month/year): 15.02.2026 - I’ve made the design free (open price) and changed license to Public Domain. You can support my work on Cults3D by donating any amount, or by paying any of my models on Printables Store on Cults3D…

P
Printables

V2 Cpap Duct Creality K1 WS7040

Changelog (day/month/year): 15.02.2026 - I’ve made the design free (open price) and changed license to Public Domain. You can support my work on Cults3D by donating any amount, or by paying any of my models on Printables Store on Cults3D…

P
PrintablesDrak

V2 Cpap Duct Creality K1 WS7040

Changelog (day/month/year): 15.02.2026 - I’ve made the design free (open price) and changed license to Public Domain. You can support my work on Cults3D by donating any amount, or by paying any of my models on Printables Store on Cults3D…

Likes
45
Rating
0