P
PrintablesΝΕΚΤΑΡΙΟΣ ΔΟΚΙΜΟΣ
precision calipers 0.02mm
fully working calipers with 0.02mm precision
- Downloads
- 729
- Likes
- 104
- Rating
- 1
Search results: 02mm
Counting matching models…
P
PrintablesJ Lake 3D
S Shaped Tolerance Test 0.1-0.4mm in 0.02mm Increments
A tolerance test to see if you can print bearings. Most of my bearings are 0.2mm tolerances because thats what seems to work best. This test is incremental by 0.02 and based on my round test. UPDATE: Added an attempt at a model with some…
- Downloads
- 549
- Likes
- 30
- Rating
- 5
P
PrintablesJEdwardS
Mini-z semi truck body 98mm and 102mm
3d printed racing semi truck body for Mini-z 102mm and 98mm wheelbase I haven't tested the 98mm version with the stock mr03 98mm pod!!! This remix works with the stock pod:…
- Downloads
- 444
- Likes
- 59
- Rating
- 5
P
PrintablesKAYMOST
OpenZ V16 Pontiac GTO 1965 102mm Wheelbase
Pontiac GTO body, made for open Z V16 model Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: Yes Supports: Yes Resolution: .15 Infill: 10% Filament: Does not matter PLA Does not matter Notes: It is advisable to print this…
- Downloads
- 329
- Likes
- 40
- Rating
- 0
P
PrintablesHetothet
Helldivers 2 Coaster 4inch/102mm
Multiple designs: -offset pattern (-0.8mm) -assembly (for multi color printers) -individual parts (for single color printers, 0.1mm tolerance) -3mf file -DFX
- Downloads
- 93
- Likes
- 21
- Rating
- 5
P
Printablessynth
Bahtinov Mask, SVX102T: 102mm aperture for ~700mm FL telescopes (128mm ID sleeve)
Prints very simply. Design includes spacing for a thin adhesive felt/flocking tape, like this one (non-affiliate link). 3MF file includes designs for 714mm & 528mm focal length Bahtinov patterns, make sure you're printing the desired…
- Downloads
- 75
- Likes
- 3
- Rating
- 0
P
PrintablesChuzo
Printer Box Air Exauts 100mm and 102mm
Modified for 100-102mm vent pipe
- Downloads
- 71
- Likes
- 9
- Rating
- 0
P
PrintablesMoe
Magnetic Connector for AC Infinity 100mm/4" Inline Fan to 102mm Hose
AC Infinity 100mm/4" Inline Fan to 102mm hose magnetic connector, using 12x 10x3mm magnets per Model and a TPU seal
- Downloads
- 63
- Likes
- 24
- Rating
- 0
P
PrintablesStampyPictures
102mm refractor scope rings and dovetail
I made a set of telescope rings and a long dovetail for my 102mm refractor, I didn't want to spend $100 for a set of metal rings that “might” fit. So I designed my own! I printed the rings and dovetail in ASA from Overture, I wouldn't…
- Downloads
- 50
- Likes
- 4
- Rating
- 0
P
PrintablesR_mix
Magnetic Parts Tray 12 Compartments 155mm x 102mm
Simple 3x4 magnetic parts tray for small screws or whatever. 155mm x 102mm. Takes 12, 8mm x 2mm magnets.
- Downloads
- 48
- Likes
- 6
- Rating
- 0
P
PrintablesRPK
Hair Dryer Fan Mount for Radiators of 57,82,102mm depth
EN: The apparent lack of demand in a bracket for the hairdryer https://www.printables.com/de/model/864578-hair-dryer-fan-radiator-mount for bathroom radiators gave me the idea that it could possibly be due to the large number of different…
- Downloads
- 27
- Likes
- 1
- Rating
- 0
P
PrintablesWhitemaker Creative
Parliament hinge jig 102mm
I needed to use 102mm parliament hinges for a door in my shed. I didn't need the projection that the hinge typically provides but wanted to make sure that it's attached to the core of the door and the frame of the building. All the jigs I…
- Downloads
- 26
- Likes
- 3
- Rating
- 0
P
PrintablesJesco
Simple Stand for 4" Refractor / Ständer für 102mm Refraktor Teleskop
A simple and small stand to put your 4" refractor onto a shelf. Just print the stand 2x and connect them with a 6mm rod (I had some 6mm linear rails lying around, I suppose wood will also work). In the attached picture I printed one of…
- Downloads
- 24
- Likes
- 6
- Rating
- 0
P
PrintablesSlegnor
Vixen 102mm Refractor Replacement Focus Wheels
Remix of Vixen 102M Replacement Focus Wheels by Ratlet Ratlet's version was solid on both sides whereas the originals are hollow on the inside. Ratlet's wouldnt fit correctly on my 4" vixen Refractor with the original screws, so remixed…
- Downloads
- 17
- Likes
- 0
- Rating
- 5
P
PrintablesTjucktjuck
102mm Ventilation wall mount
Needed to mount the ventilation hose from my Core One to the wall, so i made a mount for it. The mount has a latch that locks into place. Used 2, 5mm screws to mount it to the wall.
- Downloads
- 16
- Likes
- 4
- Rating
- 0
P
PrintablesPhantomNight_
Graphics Card Holder 102mm
Print both pieces, cover the hole with glue, and insert the pin piece. Place it under the card and enjoy safe computer operation.
- Downloads
- 6
- Likes
- 1
- Rating
- 0
P
PrintablesJavier Otero
Conector tubo 102mm marcho macho 90 grados
Conector para tubo flexible de 102mm en formato marcho macho a 90 grados. Yo lo voy a utilizar para el tubo de la salida de humos del extractor de la cocina.
- Downloads
- 3
- Likes
- 0
- Rating
- 0
P
PrintablesJavier Otero
Conector tubo 102mm marcho macho 45 grados
Conector para tubo flexible de 102mm en formato marcho macho a 45 grados. Yo lo voy a utilizar para el tubo de la salida de humos del extractor de la cocina.
- Downloads
- 1
- Likes
- 0
- Rating
- 0
P
PrintablesSillybutts
Solar Photography Telescope Filter Frame & Carrying Case for the Orion StarBlast 102mm AZ Refractor Telescope
This is my 3d printed frame for solar photography film, which also doubles as a carrying case/protective case for the film (since it's fragile!). The holes on the edges of the carrying case covers are intended for elastic cord to be tied…
- Downloads
- 1
- Likes
- 4
- Rating
- 0
P
Printables
Helldivers 2 Coaster 4inch/102mm
Multiple designs: -offset pattern (-0.8mm) -assembly (for multi color printers) -individual parts (for single color printers, 0.1mm tolerance) -3mf file -DFX
P
Printables
Ring Stick Up Cam Pro (Solar) 102mm/4" Pole Mount
Remixed from a 3" version that used M4 screws. Tried to replicate original design as much as possible but made two changes: 1) This now mounts on a 4" pipe (like a PVC radon mitigation system pipe). For some reason, my 4" pipe was…
P
Printables
Voron M4 extruder motor plate for 202mm belt
I had all of the parts on hand to build an M4 extruder except for the 188mm belt called for in the original design. I had a 202mm, so I adjusted the motor mount plate to adjust for the longer belt and still have proper tensioning range.
P
Printables
102mm Extension for Curved Litho
Quick taller lid for the Curved litho case for the taller Lithopane
P
Printables
Adjustable Door hinge jig for 50mm (2") to 102mm (4") hinges
I recently had quite few doors to hang and decided to create a pair of jigs to speed up the process (ignoring design and print time!!). Different hinges were involved so I needed the jig to be adjustable. This pair of jigs enables a…
P
Printables
Accessory Dovetail for telescope finders - modified to fit a 102mm Maksutov or other radiused optical tube
This hardware-free tapered dovetail is about the best thing I've found for finders and accessories (PiFinder) on my telescopes and Analog Sky Heart 3D printable binoculars! I love this thing so much that I've started making remixes to fit…
P
Printables
Mini-z pick up body, 98mm, 102mm
Pick up body for Mini-z. 98 mm wheelbase, 0 offset wheels. Uses accessories from the Van Bus body: https://www.printables.com/model/216437-mini-z-van-bus-body https://www.thingiverse.com/thing:5387420 updated body for more rear shock…
P
Printables
MINI Z Racing Truck 102mm wheel base
MINI Z Racing Truck 102mm wheel base design for RWD chassis. For the 98mm wheel base https://www.thingiverse.com/thing:4837099 or 94mm wheel base https://www.thingiverse.com/thing:6133471 Print Settings Printer Brand: Tronxy Printer:…
P
Printables
Token Box / Token Holder 102x102mm
A bigger vesrsion of mine simple token holder, great for board games. You can storage multiple boxes on each other. In 3mf file is added modifier that make bottom like on photo (honeycomb). STL file got flat bottom.
P
Printables
Solar filter material holder (102mm diameter)
This is a simple holder for solar filter sheet material, made for the 2024 total solar eclipse. It is designed to fit over the hood of the Pentax DA* 300mm F4, which has a diameter of 102mm, but shouldn't be too hard to resize for…