Counting matching models…
Update Late Feb 2024: We had far too many wrenches on the bench, so we designed this new Allen wrench holder for all nine sizes. https://www.printables.com/model/776625-ufs-155-t-handle-hex-key-holder-allen-wrench-holde . Stop by and…
Printable 3D model. Gengar Nintendo Switch holder. Pokémon inspiration. STL file.
The son of a friend of mine broke the original winch on his Playmobil Crane (Model 4036). Unfortunately, the parts are no longer available from playmobil. So i took it to replace the parts with 3d printed versions. The winch prints…
Gedruckt mit Prusament PETG 0,2er Layer 70% infill
This model is compatible with the lego system.
These cable guides are for the Dewalt USB Charger(DCB094K) and the matching USB-C cable. The cable should be able to loop around the adapter 3 times with a little slack at the turns. Two guides will need to be printed, one for each side.…
This model is compatible with the lego system.
Hood prop rod retaining clip for Suzuki, part number 09403-07311 The model is based on accurate dimensions taken from the original clip and fits perfectly on a 1999 Suzuki Jimny. Designed as a direct replacement for broken or brittle…
#094 Gengar – Low Poly Pokémon
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I find myself reaching for the first aid kit A LOT *** kids *** so this is a…
Wedge for fixature and lower the vibrations on VW Passat B5 headlights. Rebuild for VW's 3B0941042 which isn't produced anymore
Update June 2025: 100 degrees Fahrenheit today, and the spring snap of the current version is no longer providing retention with the clip when printed in PETG. Update July 2025: ABS printed clip is holding up to 100 degree temp so far.…
Tensor trasero para maquina corexy Sapphire plus, dos modelos para tensar, o bien hacia el chasis o hacia la cama. Category: 3D Printer Accessories
My rear-level sensor recently broke. I didn't feel like buying a new one. Super quick fix. I designed and printed this adapter. The usual failure point is when the bottom ball joint (connected to the suspension) seizes, and the metal rob…
Replacement for the dashboard blank button (OEM part no. 1M0 941 515 ). Use 3mm selftaping screw, ball diameter is 16mm.
Jedná se tedy o opakovaně použitelný filtr pro pumpu Bestway, typ II 2 nebo 58094, o průměru 106 mm a výšce 136 mm. Koncové části (víčko) by měly být nejlépe potištěny v PLU, zbytek v ABS nebo PETG. Mezi stěny pak jednoduše vsuňte látku,…
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Türöffner für eine Medion Mikrowelle MD 10940. Die Haltenasen brechen beim original gerne ab. Gedruckt mit PETG-CF. Das sollte halten für die Ewigkeit ;-(
Honeycomb Storage Wall holder SATA 09401 feeler gauge. Possibly compatible with other gauges it's aprox: 86x10x13mm Non-Affiliate Link for this feeler gauge: https://www.amazon.com/dp/B097NN3RKD Although this is my own design additional…
Freezer bucket broke they wanted $44 plus tax and shipping for this tiny piece of plastic so I made my own. Fit perfectly on my freezer with no size adjustments printed at 100% infill and scale. I've included the Model below for your use…
Vacuum skimmer plate Hayward SP1094D Plateau d'aspiration piscine Hayward SP1094D Print in ASA, 45 degrees Imprimé en ASA, à 45 degrées Printed on a Qidi Q2 65c heated chamber with : 4 walls, 15% infill, 0.24mm layer height
Throttle cable retaining clip for Suzuki, part number 09403-05311 The model is based on accurate dimensions taken from the original clip and fits perfectly on a 1999 Suzuki Jimny. Designed as a direct replacement for broken or brittle…
I made this in TinkerCAD for a project car I used to have before I lost it to a flood. I made these in TPU to get the hood back flush. GM no longer makes these and you can find some third party versions that may or may not work. I just…
Tool holder for 3pcs Ratchet Set. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 196mm W - 53mm H - 170.18mm We design all…
If you have kids and this refrigerator then you will probably need to replace these parts as your kids will break them. They are the little pieces in the drawer that hold the metal dividers in the sliding tracks. I copied the originals so…
Skoda red door reflector. Without reflective part.
tested it myself, working great I printed it the knurled end on bed
This replaces the factory dust port on a Grizzly G0948 bandsaw. It will fit a standard 2.5" dust hose. It uses the screws from the original dust port. This can be printed with no supports on a Prusa MK3S.
Parametric 5.6cm tall object with rounded circular geometry and a fluid pattern. Engineered for precise 3D printing.
Easily chip your POLA G railway barrier (old version) with a mXion MDC DCC decoder. Slide the decoder into the holder. The support part ensures the holder does not get in touch with the mechanical parts. No double-sided adhesive tape or…
Lost one of the feet for my Caldwell Lead Sled FCX, when I pulled up the manual it said the part number for the replacement foot was 1009492, this part doesn't appear to be available for sale anywhere. They do list a rubber foot on their…
Print with supports. Pls like and post makes. Good luck!!!
This replaces the factory dust port on a Grizzly G0948 bandsaw. It will fit a standard 2.5" dust hose. It uses the screws from the original dust port. This can be printed with no supports on a Prusa MK3S.
Throttle cable retaining clip for Suzuki, part number 09403-05311 The model is based on accurate dimensions taken from the original clip and fits perfectly on a 1999 Suzuki Jimny. Designed as a direct replacement for broken or brittle…
Vacuum skimmer plate Hayward SP1094D Plateau d'aspiration piscine Hayward SP1094D Print in ASA, 45 degrees Imprimé en ASA, à 45 degrées Printed on a Qidi Q2 65c heated chamber with : 4 walls, 15% infill, 0.24mm layer height
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
VAG Interior lamp light holder 3B0947415B (3B0 947 415 B) Black cover.
This is a Jonsered Model 2094 Fuel Vent tube replacement part. Replacement doesnt cost much but could no longer find one to buy. The Original broke at O-Ring Groove adjacent to the threads. How I Designed This Designed Using Featurecam…
The initial release of this model is the first feature comp[le version of the casing. I will hopefully update this soon with full build instructions. NOTE: the switch used in this is smaller than the ones recommended on the SlimeVR…
