Counting matching models…
3d printed racing semi truck body for Mini-z 102mm and 98mm wheelbase I haven't tested the 98mm version with the stock mr03 98mm pod!!! This remix works with the stock pod:…
Pontiac GTO body, made for open Z V16 model Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: Yes Supports: Yes Resolution: .15 Infill: 10% Filament: Does not matter PLA Does not matter Notes: It is advisable to print this…
Multiple designs: -offset pattern (-0.8mm) -assembly (for multi color printers) -individual parts (for single color printers, 0.1mm tolerance) -3mf file -DFX
Prints very simply. Design includes spacing for a thin adhesive felt/flocking tape, like this one (non-affiliate link). 3MF file includes designs for 714mm & 528mm focal length Bahtinov patterns, make sure you're printing the desired…
Modified for 100-102mm vent pipe
AC Infinity 100mm/4" Inline Fan to 102mm hose magnetic connector, using 12x 10x3mm magnets per Model and a TPU seal
I made a set of telescope rings and a long dovetail for my 102mm refractor, I didn't want to spend $100 for a set of metal rings that “might” fit. So I designed my own! I printed the rings and dovetail in ASA from Overture, I wouldn't…
Simple 3x4 magnetic parts tray for small screws or whatever. 155mm x 102mm. Takes 12, 8mm x 2mm magnets.
DXF Model ready to load to your laser cutter and make the classic Stiga 102m Deck for your mover… This Model has been used 3 time by 3 diffrent smiths before with good results… Hope you can get use out of it :-)
EN: The apparent lack of demand in a bracket for the hairdryer https://www.printables.com/de/model/864578-hair-dryer-fan-radiator-mount for bathroom radiators gave me the idea that it could possibly be due to the large number of different…
I needed to use 102mm parliament hinges for a door in my shed. I didn't need the projection that the hinge typically provides but wanted to make sure that it's attached to the core of the door and the frame of the building. All the jigs I…
A simple and small stand to put your 4" refractor onto a shelf. Just print the stand 2x and connect them with a 6mm rod (I had some 6mm linear rails lying around, I suppose wood will also work). In the attached picture I printed one of…
Remix of Vixen 102M Replacement Focus Wheels by Ratlet Ratlet's version was solid on both sides whereas the originals are hollow on the inside. Ratlet's wouldnt fit correctly on my 4" vixen Refractor with the original screws, so remixed…
Replacement Focuser wheels for the Vixen 102M. One is the standard size 1.6" (40mm) the other is 3" (75mm) Diameter for fine focus control. Bit of a unicorn part so probably useless to the vast majority, but to the one person who is going…
Give a broken Boavision HD22M102M security camera a new life! Boavision MODEL:HD22M102M suffers from one potentially fatal flaw. The wiring inside can shear due to the bad way strain relief is implemented: a piece of helical teflon tubing…
Print both pieces, cover the hole with glue, and insert the pin piece. Place it under the card and enjoy safe computer operation.
Conector para tubo flexible de 102mm en formato marcho macho a 90 grados. Yo lo voy a utilizar para el tubo de la salida de humos del extractor de la cocina.
Conector para tubo flexible de 102mm en formato marcho macho a 45 grados. Yo lo voy a utilizar para el tubo de la salida de humos del extractor de la cocina.
This is my 3d printed frame for solar photography film, which also doubles as a carrying case/protective case for the film (since it's fragile!). The holes on the edges of the carrying case covers are intended for elastic cord to be tied…
Multiple designs: -offset pattern (-0.8mm) -assembly (for multi color printers) -individual parts (for single color printers, 0.1mm tolerance) -3mf file -DFX
Remixed from a 3" version that used M4 screws. Tried to replicate original design as much as possible but made two changes: 1) This now mounts on a 4" pipe (like a PVC radon mitigation system pipe). For some reason, my 4" pipe was…
Needed to mount the ventilation hose from my Core One to the wall, so i made a mount for it. The mount has a latch that locks into place. Used 2, 5mm screws to mount it to the wall.
Quick taller lid for the Curved litho case for the taller Lithopane
I recently had quite few doors to hang and decided to create a pair of jigs to speed up the process (ignoring design and print time!!). Different hinges were involved so I needed the jig to be adjustable. This pair of jigs enables a…
Printed in PLA 0,2mm, 30% 3D honeycomb infill, with tree organic supports.
This hardware-free tapered dovetail is about the best thing I've found for finders and accessories (PiFinder) on my telescopes and Analog Sky Heart 3D printable binoculars! I love this thing so much that I've started making remixes to fit…
Mount the Boavision 360º security camera that requires a vertical wall at the corner of the house under the soffit. It creates a vertical mount plate for the camera that is 45º from either wall and bolts into the frieze boards on both…
Pick up body for Mini-z. 98 mm wheelbase, 0 offset wheels. Uses accessories from the Van Bus body: https://www.printables.com/model/216437-mini-z-van-bus-body https://www.thingiverse.com/thing:5387420 updated body for more rear shock…
MINI Z Racing Truck 102mm wheel base design for RWD chassis. For the 98mm wheel base https://www.thingiverse.com/thing:4837099 or 94mm wheel base https://www.thingiverse.com/thing:6133471 Print Settings Printer Brand: Tronxy Printer:…
A bigger vesrsion of mine simple token holder, great for board games. You can storage multiple boxes on each other. In 3mf file is added modifier that make bottom like on photo (honeycomb). STL file got flat bottom.
This is a simple holder for solar filter sheet material, made for the 2024 total solar eclipse. It is designed to fit over the hood of the Pentax DA* 300mm F4, which has a diameter of 102mm, but shouldn't be too hard to resize for…
