17 models
Printed in PETG with a 45 degree tilt for greater resistance. The stl file is already placed in the correct position. - Enable borders - Activate organic supports - Gyroid filling at 20%
Small cases for Luckfox Pico Pro/Max (RV1106) and Pico Plus/Mini (RV1103) You can add a piece of clear filament in the hole near the usb-c port to guide the indicator light through (for Pro/Plus/Max). There is also a version without the…
A mini brushless drone frame (90mm from motor to motor) that doesn't need any screws - everything is held together with zip ties. The frame is ready for standard 20x20mm flight stacks such as HGLRC Micro F4 V2 and similar. The frame comes…
Print 2 model just fix the top one on the wall, the second is used to keep the car parallel to the wall
Poussoir de remplacement pour robot KitchenAid.
Frame for utilize with spare motors 1103 -11.000kv of Betafpv Cetus X
Mobula8 Frame is soo damnn easy to break, its better to switch to the more durable Meteor85 frame. The Original EX1103 motor screw pattern is different from what betafpv uses on the meteor85 so its necessary to drill the fitting holes for…
Support yes nozzle 0,4 infill 50 % cube
I got bit by the nano/piko/femto quad bug and had to make one. I liked the look of @microdure's frame, but it was bigger than I wanted. I had already started working up a very minimal frame design and printed it as 80/90/100 mm....but…
Supporting points are motor housing and inside of the hole where propeller fixing nut is located. Might work with other Torqeedo models as well, but I have no idea what the dimensions are for those. Propellers cone shape is another…
A 2-inch micro drone frame with six motors crammed into it, because... why not? Why this exists I flew a Mobula 8 into the ground more times than I'd like to admit — loved the low profile, loved how quiet it was, hated how it turned into…
Replacement for endstop cover for Came H1103 motorized garage door Print in ABS or ASA for major resistance
This is a case I made for shipping probes to CuriousMarc who then forwarded one to atkelar. As seen on atkelar's video about the HP 410C VTVM
This stand provides an alternative to wall mounting and allows the indoor station to be placed on a desk, shelf, or sideboard. The table stand is designed for the DoorBird A1103 IP Video Indoor Station. Compatibility with other models has…
Supporting points are motor housing and inside of the hole where propeller fixing nut is located. Might work with other Torqeedo models as well, but I have no idea what the dimensions are for those. Propellers cone shape is another…
Printed in PETG with a 45 degree tilt for greater resistance. The stl file is already placed in the correct position. - Enable borders - Activate organic supports - Gyroid filling at 20%
