Counting matching models…
These mouthpieces were designed in Fusion 360 taking inspiration from the profiles provided by the Wedge Mouthpiece website (https://wedgemouthpiece.com/all-trombone-mouthpieces). The mouthpiece files are named according to their names on…
An adjustable paper roll holder for 11cm diameter size paper rolls. Print instructions Print settings Material: PLA Infill: 15% Supports: No
Play Fair! Referee cards with the profesional size 80 x 110 mm Thickness 1.5mm Have fun printing
This is a model for an hamburger press to create the perfect mix at home. The model is done for 11cm hamburger and you can rely on a tall container to choose favourite hamburger height.
Simple Planter Tray / Untertopf with a diameter of 11cm
I modelled this cup for my Son, so that I am able to stretch the Z axis (increase height of cup) to create taller or shorter cups depending on how many dice he wants to stack. Printed on a Prusa MK3S+ with the fuzzy skin option on outside…
Cortadores de galletas con marcador de los reyes magos en 11cm
I designed a plant suacer with a diameter of 11cm.
A simple case for new black pill dev board (version with stm32f411x, should be compatible with stm32f401x, not to be confused with old black pill with stm32f103). No screws needed, top should snap on the bottom. Bottom holes should fit…
Generated using VennCad, Model is oriented to allow for best performance. Use tree supports at 20 deg threshold angle, on build plate only and support crit regions only. Add a negative cylinder into the slicer to remove the text above the…
I got a Roborock S7 recently and had to raise my couch/sofa so it would fit under it. I printed these with 20% hexagonal infill and 0.2mm layer height and they came out super strong! No chance these are going to break.
Simple wall holder for LG remote. Use double-sided tape to mount it Skechup file included - feel free to remix and share!
Einfacher, stabiler Winkel mit einer Schenkellänge von 11cm. Zwei Schraublöcher pro Schenkel.
Another Set of TRAINING Knuckles Ver 11C One Piece
Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this container ensures your items stay safe while on the go.
Just a larger version of the original.
Ich habe den Baum mit PLA in mattem Hellbraun gedruckt, wodurch er aussieht, als wäre er aus Holz gearbeitet. Der Baum ist 11 cm hoch und besteht aus 6 Teilen und einem Fuß. Nach dem Druck müssen die Teile noch zusammengeklebt werden. In…
I use bigger ventilation (pipe diameter 11cm), this is in smaller size to fit named soft pipes.
My HP-11c from the 80's is still going strong, but somewhere in the last 30 years or so the battery cover disappeared. With this part I no longer need tape over the battery compartment. Print Settings Printer: flsun prusa i3 Rafts:…
Wall adapter that can be used to fit an mobile airco outlet to a wallhole of 11cm. There is also a shutter to close the wallmount. The airco pipe can be easily removed from the wallmount if needed. Can be screwed in the wall with 4…
Each holder fits 4 mason jars with a diameter of 11cm (e.g. IKEA KORKEN 2l). Usable for sideways or upright storage. Multiple holders can be stacked vertically or sideways using the interconnector in the slots on all for sides. The…
I have provided .obj and .stl files and a model without landing gear and one with landing gear.
I personally printed in PLA with 5 walls, 0% infill. Print as shown in picture, no supports needed.
Some of the most common, reliable, and longest-serving weapons across Auraxis can now be yours! This model contains files for the NS-11C carbine, NS-11A assault rifle, and NS-15M light machine gun, all separated into modules that can be…
Check the description in the the original post for 10cm version.
This alcohol prep pad dispenser is compatible with single use 11cm x 15cm single packs. It's been designed to snap into the Parkside Pegboard system Dispenser will hold one full box of 50ct prep pads I use the Alcohol Prep Pads from…
Here are two funnels for filling out and three for filling in round storage jars with a thread - each of which with tight and regular thread fit. I have adapted the thread to these jars: "BigDean 2er Set Vorratsgläser 2,2 Liter Set Glas…
I designed this for the PZL P11c of 3DLabPrintt / PrintBeat. In my opinion it needs a tail wheel but it comes just with a stand off. if you hava huge flying field to start from, then you probably don't need a tail wheel. But in my case, I…
To facilitate easy alignment of a joint bar within a milled hard foam model. 25mm drilled hole 11cm long
I have an Eufy Robovac 11c and suffered an issue where the Robovac would just spin in circles. After searching YouTube, I discovered that this is a common issue with this Robovac model and is caused by the cog in the gear train wearing…
A case for mounting the Sparkfun Fingerprint Scanner outdoors - https://www.sparkfun.com/products/11792 Check out my IoT Garage Monitor Opener Project here:…
3d print out of TPU or another flex filament Glue the feet on using super glue or another glue of your choice. Lastly, for the glue to «grab» the TPU better, use textured build plate Enjoy!
This lid is designed to fit a Duralex 11 cm food container. Best printed in PETG. Note 1 : When printed in PETG, it shrank a little in the dishwasher, even though a shrinkage compensation of 1.003 was used in the slicer. So if you want to…
Generated using VennCad, Model is oriented to allow for best performance. Use tree supports at 20 deg threshold angle, on build plate only and support crit regions only. Add a negative cylinder into the slicer to remove the text above the…
My beloved woman has been looking for a spice box that fits her for a long time. And she was glad when I offered to fulfill her dream :) The model is built in the SolidWorks program, so those who wish can fix it to suit their needs. It…
Works well in pla but eventually cracked. CAD https://cad.onshape.com/documents/b5e944e98bbeb2218cca3fb7/w/f5194ccad21a5166bec21ca8/e/c6a09d00e29000777922fc20
A pencil/pen vase to keep your favorite pens and pencils, or anything else, in. It is 110mm tall and 84mm for the x and y axis. The photo shows the vase printed in vase/spiralize mode with 1 wall and 3 bottom layers. The stl file is…
My beloved woman has been looking for a spice box that fits her for a long time. And she was glad when I offered to fulfill her dream :) The model is built in the SolidWorks program, so those who wish can fix it to suit their needs. It…
Inner diameter 35mm Print it lying on the side like in the photo. Supports should be used sparsely and not in the flat part, as you may not get them out. Use support blockers.
Holder for 11cm x 2mm Coasters. Two models provided for a 4, or 6 coaster set.
UnOriginal Prusa Drybox-endlüfter Rad 11cm Durchmesser Stl-Datei im Slicer in Opjekte teilen,das innere Teil als Schablone für Schraubenloch und Luftlöcher nehmen. Wenn die Löcher ausgenommen sind(können ein klein wenig grösser sein als…
A tiny 3D printer model for decoration 7 parts to print and assembly (plus a piece of filament) Printed with PLA. Print all parts with brim. No support required.
