Search results: 1250

BMW R 1250 GS Adventure Wall Art

BMW R 1250 GS Adventure Wall Art Silhouette model. Adjustable size. I accept model suggestions.

BMW R1200 & R1250GS Garmin to TomTom mount converter plate

Use this plate to easily mount a TomTom in place of a Garmin on your BMW R1200GS or R1250GS. Will likely also work on the BMW S1000XR and other motorcycles with the sat-nav mounted in the same way.

Pampered Chef Quikut Paring Knife #1250 Sheath

A parametric sheath with parameters specific to the Pampered Chef Quikut Paring Knife #1250. These came with carboard sheaths which these replace. The parametric model can be adjusted if the blade fits too tight or loose based on your…

Remote & Cleaner Holder for Powermatic PM1250 Electrostatic Air Filtration System

Simple holder for the Powermatic 1250 air filtration unit remote and cleaning brush. Attach with double-faced tape (wherever you like, I attached mine on the inside frame). Printed with PLA (In retrospect I might re-print in another color…

Coin Tubes for Safescan 1250 EUR

Since the original Coin tubes tend to break very easily, I designed some replacement tubes. They have a slit where you can check the amount of coins that are in. Each tube has a text that indicates which coin fits inside and how many…

Nameplate (1250 names included)

The desktop nameplate, with 1250 first names included. Print instructions You can print the nameplate without any support, in the “face up” direction as in the STL. This way the front will look smooth and clean. Activate ironing to get…

Holder for Carpuride W702 / W502 on a 12mm bracket (e.g. BMW R1250GS)

remove the RAM mount ball by unscrewing the centre screw close the hole by screwing the screw back in or replacing it with a suitable M4 screw remove the 4 screws at the corners of the metal plate press 4 pieces of M3 nuts into the…

Maisto Model Motorcycle Stand (BMW R1250GS)

This stand is designed to not only hold the 1/12th scale model bike, but it also gives you the option to electrify the stand with connection points to the bike. This opens up the option to install LED lights in the bike and have it light…

Nameplate "Master of disaster" (1250 names included)

A desktop nameplate, subtext “master of disaster”, with 1250 first names included. Print instructions You can print the nameplate without any support, in the “face up” direction as in the STL. This way the front will look smooth and…

BMW R1250GS Adventure rubber foot pegs

BMW R1250GS Adventure rubber foot pegs I have been testing them for 2 months now and they are working very well. Play around with the filler for hardness. I recommend print it from TPU with fill Gyroid 20% to start with and size 100 to…

Husqvarna Viking 1100, 1200, 1250, #1, #1+ Stitch "Cassettes"

Project Inspiration Hi. I recently purchased a used Husqvarna Viking 1100 and it was missing the stitch cassettes. The 1100 originally came with 4 cassettes, A, B, C, and D. However I was able to find a combination to make an “E” cassette…

Nameplate "Chief Of Unicorn Division" (1250 names included)

A desktop nameplate, subtext “Chief Of Unicorn Division”, with 1250 first names included. Print instructions You can print the nameplate without any support, in the “face up” direction as in the STL. This way the front will look smooth…

BMW GS1250 Adverture

Download ? Please Like Thx BMW GS1250 Adverture

Walther 1250 Dominator Umarex Hammerli 850 loader

this loading tool is made for 2 magazines(cylinders) so as shown on the picture can you move the pellets to the side in the grove after your done loading. and push the cylinders out from bellow when your done. Category: Sport & Outdoors

BMW R1250GS - Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger

BMW R1250GS - Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx All trademarks, logos and brand names are the property of their respective…

Noco Boost GBX 45 1250A

Hello everyone; Some time ago, I bought a Noco Boost device, but it only came with a bag for storage. I always found this very impractical for storing in the car. That's why I have now designed a practical toolbox for it. The booster fits…

Club Hammer 1250 Grams holder 039 I ENFORCE I for screws or peg board

Tool holder for Club Hammer 1250 Grams. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 100mm W - 70.60mm H - 64.50mm We…

Guide rail adapter for Ryobi HCS 1250

Work in progress model not fully tested Ryobi HCS 1250Circle saw guide rail adapter. Allowing you to use the Ryobi circle saw (185 blade) of on a Makita (or similar like festool and other brands) guide rails. It has adjustable trim blocks…

Parkside PPAMR 1250 A1 lawn mover robot boundary pin

Parkside PPAMR 1250 A1 lawn mover robot boundary pin. These are hard to get and only 15 pins in set. Two versions: pin_plain - there is a need to use red sticker tape or multicolor print. pin_body + pin_red_stripe. Just print red stripe…

BMW R1250GS Key chain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger

BMW R1250GS Key chain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Type B / C / D Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx All trademarks, logos and brand names are the property of…

Recteq RT-1250

This is a 1:15 scale model of a recteq RT-1250. I had to over exaggerate the bucket and the legs and wheels to make it printable.

BMW R1250GS - GoPro - The Remote handlebar mount with cable ties

BMW R1250GS - GoPro - The Remote handlebar mount with cable ties

BMW R1250GS navigation spacer v2

You need brass inserts instead of nuts. A screw has been added for a more fixed installation. I recommend grinding the tip of middle screw to a point.

BMW R1250GS navigation spacer v1

BMW R1250GS navigation spacer Print with 20% infill

Rackmount 1U Zyxel XGS1250-12

1U Rackmount for Zyxel XGS1250-12. Split design for small printers. BOM: 14x M2 heat-inserts 8x M2x25 (or longer) SHCS Screws 2x M2x16 (or longer) SHCS Screws 4x M2x10 (or M2x12) SHCS Screws You'll find a full assembly which shows how to…

Motorola CDM1250 Repeater Mount and 140mm Fan Mount

I looked around for a Ham radio repeater mount and I struggled to find one I really liked so I designed this one based on a previous design and I designed the new rear portion to create a more stable platform and provides additional…

3DSets - Motor Pulley & Mount for Avian 3530-1250Kv Brushless Motor

Adjusted motor mount and drive pulley for the Avian 3530 Brushless Motor. These has a wider pattern vs. the stock parts.

Bosch GOF 1250 CE base plate for guide bushings

Bosch GOF 1250 CE base plate for KATSU (or similar) guide bushings.

BMW R1250GS Screen Stabiliser

I wanted to reduce the screen vibrations on my R1250GS and keep the functionality of easy height adjustment and access to the GPS navigation locking system. I didn't like the commercial options. The system clamps onto the BMW GPS mounting…

Gamin Zumo XT to BMW R1250GS Navigator 6 mount adaptor

These parts allow the Zumo XT to fit into the standard BMW R1250GS Navigator 6 mount and maintains the OEM keyed locking function. The Zumo XT has slightly different dimensions to the OEM system so offset holes need to be drilled through…

Oil filter wrench; Ölfilterschlüssel BMW R1250GS

Want to change the oil in your BMW 1250 GS yourself, but don't have the right oil filter wrench? Then this tried-and-tested oil filter wrench is just what you need. For 74.6 mm 14-sided original BMW oil filters.

Dovetail for Skywatcher Maksutov 90/1250 to EQ-3 mount

Dovetail for Skywatcher Maksutov 90/1250 to EQ-3 mount This dovetail was made specially for Skywatcher 90/1250 MC telescope and Skywatcher EQ-3 (EQ3-2 too) mount. I mean, I don't know if it fits other telescopes and mounts of other…

Recteq RT-1250 grease spout cover

This is a cover for the grease spout on my RT-1250. I'm not sure if it works on other models or not. It goes without saying that this should not be put on or left on when the smoker is hot. Print Settings Printer Brand: Prusa Printer: I3…

Knipex Cobra 8701250 Jaws Covers (TPU)

There are quite a few jaw covers for Knipex Cobra 87 01 250 on thingiverse, printables and makerword already. I printed about 5 different models, but was not satisfied -- they were too lose in different ways. May be Knipex slightly…

My Customized vacuum cleaner nozzle for Einhell Duo 1250/1

Customized version of http://www.thingiverse.com/thing:1571860 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1571860 Instructions Using the following options: Base_Diameter = 34.9 Nozzle_Chamfer_B = 20…

Battery cover for BMW R1250 GSA

I had a Battery Tender BTL35A480C LiFeP04 battery (linked below but no longer for sale) that came out of another vehicle and I wanted to use it to replace the factory BMW battery that was getting old. It was just slightly too wide to fit…

Ryobi Orbital Sander ROS300 Vacuum Adapter for Ozito 1250W 12L Stainless Wet And Dry Vacuum

Vacuum adapter that fits Ryobi Orbital Sander ROS300 output to Ozito 1250W 12L Stainless Wet And Dry Vacuum

Extra Long Club Hammer 1250Grams/3LB for screws or peg board

Tool holder for Club Hammer 3LB/1350 Grams. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 100mm W - 60.29mm H - 64.5mm We…

BMW 1250 GSA - GoPro - The Remote handlebar mount

A small and easy to install handlebar mount for the gopro remote. Its a very snug fit, but still easily removed when you need to take it with you. Mounts to the handlebar with some double sided tape. There are two files, one for mounting…

BMW R1250RT

BMW R1250RT Download ? Please Like Thx

BMW R1250GS Motorcycle Key Blank | BMW R1250GS Motorrad Schlüsselrohling

EN: This is a STEP model of a BMW motorcycle key blank. I designed the key blank as accurately as possible based on a laser scan and various measurements. The central longitudinal grooves on both sides are the same for all keys, and the…

BMW R1200GS R1250GS Aux USB bracket

Bracket for mounting second Aux power source i.e touratech twin USB or BMW DIN if not fitted. Needs 2 m6 nuts and longer m6 bolts for fixing Loom cable can be purchased, please message

BMW R1250GS Action Cam Mirror Mount (Spiegelhalter)

This action cam mount is designed for the original left mirror of the BMW R 1250 GS (YOC 2020+). It contains of a bottom part which stabilises the holder and the upper lid with the cam mount. You need 2xM5 screws and (self-locking) nuts…

Suzuki Bandit 1250 swivel frame cover / Schwinge Abdeckung

I lost cover of the swivel frame locking nut. 20€ for an spare cover (again I lost one before) wasńt an option so i designed my own. Ich habe die Abdeckung für den hinternen Feder Schwinge wieder einmal verloren 20€ waren mir zuviel also…

Antibascule défonceuse bosch gof 1250

Support pour défonceuse bosch Gof 1250. Des emplacements sont prévu pour glisser des écrous rectangulaires M5.

Dell Micro QCM 1250 Vesa Mount 100x100

I have made a slot in mount for the Dell Micro QCM 1250. My screen has VESA 100x100. The one you will see in the photo is the 10mm height and i have made also a 6mm that i believe it will be also OK! I have printed it on ABS and the holes…

Maisto Model Motorcycle LED Tail Light (BMW R1250GS)

Make your 1/12th scale model bike glow! Way cooler than a sticker of a light. You'll have to cut out the tail area where this goes. Easy to do with a small hand saw blade. Super glue will hold the light in place when you're ready. Print…

Genius GX Gaming SW-G2.1 1250 - amplifier mount

Genius GX Gaming SW-G2.1 1250 - amplifier mount Simple mount for amplifier. Possible to mount on the bottom of table. Side mount also possible. You can use both types or only one that suites you. Type 2 is with end wall. Made in FreeCad…

Mirror GSXR 1000 converter bracket to Bandit GSF 1250SA GT (possible GSF650 and GSF1200) WORK IN PROGRESS!!

WORK IN PROGRESS, please read the description. I wanted mirrors on my GSF 1250 SA GT with turning signals. But didn't want aftermarkt models. So looked for a model that came with these from the factory. I found the Suzuki GSXR 1000…

BMW R1250R / RS 60mm Hub Cap Clip

Clips for 60mm Hub Caps to snap into the hub of a BMW R1250R / RS Hub Caps can be found on Ebay etc. Designed for 60mm caps with 5 clips. Snap off the original clips and glue the model in place. Wire ring clip can be reused, model mounts…

Walther 850 AirMagnum / 1250 Dominator / RM8 Magazin Halter

Ein Möglichkeit 3 Walther 850 Airmagnum, 1250 Dominator oder RM8 Magazine fertig befüllt zu transportieren und diese auch einzeln zu entnehmen. Das leere Magazin kann entweder zurück in die Box oder man verstaut es anderweitig.

BMW R1250 GS Adventure Slider

For original BMW crasch cover

Nice PAD1250.4525 replacement screw

Replacement for discontinued Nice PAD1250.4525 part. Best printed in PA12 without fillers. Repurposed for PH2

TAU-1250T Solenoid

TAU-1250T Solidwork parts.

Side stand Foot Extender, BMW R1250GSA

I had my off the shelf extender fall off somehow and I didn't want to spend another $80 on a new one. Made specifically for a 2021 R1250GSA with low suspension, I printed the bottom out of a stiffer TPU, and the top out of PETG, both with…

BWM R1250GS GoPro Adapter Mount for Signal Mounting Plate

This adapter plate will allow you to use a signal mounting plate from AliExpress and move the camera out further from the body work so you can plug in constant power to the camera while recording or charging the GoPro.

Ridgid MS1250 Miter Saw Zero Clearance Insert Throat Plate

Replaces the throat plate of a Ridgid MS1250 miter saw. Add a long rectangular modifier to increase infill to 100% in the middle 15mm where the blade goes through. Install and make a slow cut. May have to take it out and sand a little…

Dell 3.5" HDD screw Pro Slim Plus QBS1250

If you order a Dell PRO Slim plus with an optical drive, it comes with a drive cage to mount a 3.5" hdd. But no screws. The screws on the website appear to be $4AUD each Here are 4 solutions that can use existing hdd screws you have lying…

bosch gof 1250 LED light

I wanted a LED light for my Bosch GOF 1250 CE router. (There is a version that has LED included, but i don't have thist one.) I wanted a switch, so I can use the light, also when the router is not running. And I wanted to be able to…

Elfa Pegboard TI-1250 Calculator Holder

Does what it says. Designed specifically for a TI-1250 vintage calculator. Probably would work for lots of smallish calculators though. Requires 2 of these Elfa pegs also.

Motorcycle Lithium Battery Spacer - BMW R1250GS

This is a spacer for the BMW r1250GS battery compartment. It should also fit the r1250r, and r1250RS Or any motorcycle by scaling the dimensions in slicer Designed to fill that empty gap left by a smaller and lighter lithium battery when…

Presser foot lever for Husqvarna 1250 Orchidea

This is a presser foot lever spare part for the Husqvarna 1250 Orchidea Sewing Machine. According to the original part the part number is 412 15 02. A security pin presser on the presser foot for my aunts sewing machine had broken. When…

1" Ball Mount BMW GSA 1250 Crash Bar

This is a ball mount that attaches to the factory crash bar. You will need to replace the factory bolt. I used a 130mm long hex bolt. I printed at 25% with no support, but modified the neck.

Dexp FD-1250-P turbine

One day, i break my old turbine on Dexp FD-1250-P dryer, and desined my own

Magagzinhalter 850 AirMagnum / 1250 Dominator / RM8

Ein Freund bat mich im einen Adapter für seine 850 AirMagnum zu bauen, sodass er die Magazine am Schaft befestigen kann. Schnelle Idee und schnelle Umsetzung ;) Dieser Adapter kann 5 Trommelmagazine halten und kann entweder geschraubt…

Full-sized Expansion Slot Cover for PCIE Win TV 1250 Low Profile

I know this is wildly niche, but since I took the time to make it, I figured I'd share. Basically, you fasten this to a Win TV 1250 Low Profile PCIE tuner if the pack you bought it with doesn't include the full-sized cover and it'll fit…

SMD Magazine Loader Inserts for LordAsdi_1250566 Remix

Magazine loader inserts for the Robins Tools magazine loader to work with the (apparently) smaller holes in the Lord Asdi magazines. Lengthened the inserts to extend through a 24mm magazine. Note this remix in ONLY the resized inserts for…

Keramický překlad Heluz 23,8 - dl. 1250 mm

Žáci 2. ročníku vytvořili model keramického nosného překladu pro sv. otvoru 1000 mm. Jako předlohu si vzali zdicí systém firmy Heluz a pro spojení využili systém stavebnice LEGO.

Schnellade Magazin Walther Dominator 1250 4,5mm / cal.177

Schablone für DX-Code ISO 1250; Template for DX code ISO 1250

Schablone um den DX-Code für ISO 1250 auf Filmpatronen zu übertragen welche diesen nicht haben. Die Seite mit den abgeschrägten Ecken an der Filmaustrittsöffnung platzieren und den Lack der Filmpatrone abkratzen. Bei Patronen aus…

Garmin BC 40 Camera BMW Vario Top Case F850GS F750GS R1200GS R1250GS

I needed a camera that works with my Garmin Zumo XT navigation device on my motorbike All the space on the rear BMW F850 GS is full with extra lights etc. so the only space was under the Vario top box. The screws from the top case are…

Alternate Bltouch and duct for https://www.thingiverse.com/thing:3412500

5/15/2019 edited 1.5mm higher for more probe clearence, allowing room for shims for fine tuning. Wanted my 3dtouch closet to the nozzle so i came up with this location settings X= 8, Y= -28 Category: 3D Printer Parts

MP1250 Grundig S-VS180 Battery Adapter

Adapter to add a external power supply to the Grundig S-VS180

HP Pavilion g7-1250sf Adaptater for Laptop Stand for Vesa Mount

This is a remix/custom of Laptop Stand for Vesa Mount for my personal need with my HP Pavilion g7 1250sf and maybe with other laptops. For all instructions & other parts, go to Laptop Stand for Vesa Mount . I want to thanks user carlol…

Dell Pro Micro Plus QBM1250 - Snap-in P-Touch Label Plate

Dell Pro Micro Plus QBM1250 - Snap-in P-Touch Label Plate Snap-in mounting plate for 12 mm P-touch labels on the Dell Pro Micro Plus Desktop (model QBM1250). Fits the top horizontal vent strip directly above the power button. Uses a…

Support Télépéage pour BMW 1250GS

Compatibilité Moto : BMW R 1250 GS et R 1250 GS Adventure (équipées de la barre de navigation d'origine). Emplacement : Fixation directe sur la barre supérieure du cockpit (diamètre 12 mm), idéalement positionnée derrière la bulle pour…

BMW R1250GS Rim Mount

Turn your BMW R1250 GS front wheel rim into a clean, functional wall piece. This adapter lets you mount the rim securely to a wall and use it as a premium organizer for things like a garden hose, air hose, extension lead, EV/charger…

21250 Akkubox

Dies ist für 21250 Akkus eine Box um vielleicht daraus eine Powerbank machen zu können

Einhell INOX 1250 Motor Attachment clip

On my shop vac, this attachment clip has been broken for a long time. Being an interesting shape, I decided to model it. The replacement fits very tightly on my vac, I printed this in PETG and 15% Infill, with the areas around the pins…

Dell QCM1250 PC Ceiling Mount

Dimensions are tight because I designed this to be secure on a ship, so i wanted as small of tolerances as possible. All one piece, 1/4 inch thickness.

Sphere 1250

1250

BMW R1250R Navigation Relocation Bracket

The bracket allows you to move the navigation cradle forward and up a bit. By positioning the cradle forward so it is just under the main display in your field of view, it makes it a lot easier to read while riding. I've printed this in…

BMW R1250R navigation mount – missing parts – AliExpress

Chybějící díly pro držák navigace pod štítek pro BMW R1250R odjednaného z aliexpress.

Replacement Wall Hinges for Regalo 1250 / 1250 B Top of Stairs Gate (with slide-in pin clip)

Both wall hinges on my Regalo Top of Stairs gate (model 1250 B) cracked, and replacement hinges weren't easy to get. So I designed new ones that fit the gate's original screw holes and L-shaped pins. Mine have been on the gate since…

Motorcycle Lithium Battery Spacer - BMW R1250GS

This is a spacer for the BMW r1250GS battery compartment. It should also fit the r1250r, and r1250RS Or any motorcycle by scaling the dimensions in slicer Designed to fill that empty gap left by a smaller and lighter lithium battery when…

Dexp FD-1250-P turbine

One day, i break my old turbine on Dexp FD-1250-P dryer, and desined my own

Nice PAD1250.4525 replacement screw

Replacement for discontinued Nice PAD1250.4525 part. Best printed in PA12 without fillers. Repurposed for PH2

BMW R 1250 GS Adventure Wall Art

BMW R 1250 GS Adventure Wall Art Silhouette model. Adjustable size. I accept model suggestions.

Dell 3.5" HDD screw Pro Slim Plus QBS1250

If you order a Dell PRO Slim plus with an optical drive, it comes with a drive cage to mount a 3.5" hdd. But no screws. The screws on the website appear to be $4AUD each Here are 4 solutions that can use existing hdd screws you have lying…

My Customized vacuum cleaner nozzle for Einhell Duo 1250/1

Customized version of http://www.thingiverse.com/thing:1571860 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1571860 Instructions Using the following options: Base_Diameter = 34.9 Nozzle_Chamfer_B = 20…

BMW R1200 / R1250 Wuchtadapter Balancing Adapter

For 5-hole rims (cast + spoke) PETG is not absolutely necessary, PLA works. I would recommend using 3 - 4 wall lines and 20 - 30% infill. Layer height 0.2 mm. The brand name is used solely for descriptive purposes to indicate the…

Elfa Pegboard TI-1250 Calculator Holder

Does what it says. Designed specifically for a TI-1250 vintage calculator. Probably would work for lots of smallish calculators though. Requires 2 of these Elfa pegs also.

BMW R1200 / R1250 Wuchtadapter Balancing Adapter

For 5-hole rims (cast + spoke) PETG is not absolutely necessary, PLA works. I would recommend using 3 - 4 wall lines and 20 - 30% infill. Layer height 0.2 mm. The brand name is used solely for descriptive purposes to indicate the…