Counting matching models…
This is a device that neatly trims the crimped tops off loaded 12 gauge shotgun shells. There are separate model for 20 gauge and 28 gauge. Mostly this is done to reload shot shells with the appropriate solid shotgun slug, such as the…
"Special" ammunition box holds 15x 12/76. Hardware : 6 x M3 12mm Print setings: Lager:0.2 Infil 15% Material petg . If you like my project you can buy me a coffee. Thanks https://buycoffee.to/dabal
Box : Ammo box 12ga ammunition storage 20 rounds ammo crate 12 ga Dimensions : 6” x 3.5" x 3” Includes : - base (lower) - lid (upper) - lid punisher edition multicolor (upper) - lid punisher edition single color (upper) - insert - front…
Version 2 of my original Shell Caddy Designed for ELS and Tek-Lok mounting systems May fit others with 1.5" hole pitch 10° grab angle on the shell groups Added mounting options and configurations New parts work with old mounts, if you…
Copy of the original OPSol adapter for Mossberg shotguns. Adapter allows use of 12ga 1.75″ Birdshot, Buckshot, and Slug Shells Only fits: 12ga Mossberg® 500, 500A, 590, 590A1, and Maverick® 88 models, and the 12ga Shockwave Firearm Should…
Version 2 of my original Shell Caddy Designed for ELS and Tek-Lok mounting systems. May fit others with 1.5" mounting hole pitch 10° grab angle on the shell groups Added mounting options and configurations New parts work with old mounts,…
MinionD Ender 3 / PRO / v2 dual duct 12gr | stock hardware With the existent hardware, this dual duct mount is intended to replace the stock one, improve part cooling, air flow... Easy to print, mount and do some maintenance ;) After a…
Independent fan holder for SV08. detached from cover widely visible nozzle only 12g good airflow inspired from bambu shroud screws into the toolhead board works with Eddy punch through screw hole(for easy print) does not need a cover.…
This is my remix of Linear Bearing Greasing Cap by walter to fit on small 12g tube of Super Lube. It is only for LM8UU (8mm) bearings. You have to cut off the tip of the tube just above the thread like I did (check pictures). I have…
I couldn't find any stl's for side saddles to fit my Winchester SXP Defender 12ga Shotgun, so I made one of my own by remixing a couple parts into one solid piece. Instead of sourcing the very obscure #6-48 screws that the SXP series…
not perfect but they hold the shells for hand reloading. i put supports on for the eased edges. takes about 2 hrs to print.
12G and 20G Shotgun Choke Boxes Fully printable one piece design. Long choke boxes for chokes up to 90mm (3.5 inches) in length. Minimum print bed size length 238mm width up to 120mm 12 Gauge - 6, 8 or 10 choke boxes 20 Gauge - 8 choke…
Magazine loading assist for 12GA magazines. Tested with stock Panzer Arms 5 round 12GA mags, Rock Island Armory 9 & 19 round 12 GA mags. No others available to test yet but it should work on most 12ga AR style magazines. You will need…
Simple hygrometer stand for household/office/garage/printing purpose. Fits popular low cost eBay, Amazon, Aliexpress round hygrometer modules. Fits perfectly to the module, also fitting area is thin for module replacement or re-use. I…
I checked the other filament holders here, but all I checked have the wrong thread - at least for my 3 Neptune Pro (they have a thread pitch of 1.8mm – the correct pitch is 1.5mm), so I had to design my own model. Since I love vase mode,…
This coffee scoop is both easy to print and comfortable to hold, making it the perfect companion for coffee enthusiasts. When filled, it holds approximately 12 grams of coffee beans. The scoop features a hanging hole for convenient hook…
I created my own 12g breech flag (safety flag) because plastic one alway get broken pretty fast. Back side is not too big so don't caught by extractor. Tried to print with PLA/PETG/ABS and all those filaments broke fast. So my conclusion…
Softair bottles arrives usually in carton boxes, once a few have gone the remaining ones wander around and they are under pressure! this canister keeps them in place, full capacity is 13 but, because I carry also maintenance oil bottles,…
This M-Lok compatable shell holder holds 3x shells in the vertical position. Included is the step file incase you want to edit/remix. I specifically made this for airsoft but it can be used for real-steel. Recommended filament: PETG
These are 3D-printable shotgun chamber flags that fit directly into the chamber and stick a big bright plate out the side so it’s obvious the gun is clear and unloaded. I’ve included models for: 10 gauge 12 gauge 16 gauge 20 gauge 28…
A cute Valentines Day Kirby holding a heart :) Perfect as a Valentine’s Day gift or desk decor. SIze: 38mm x 42mm x 37mm Print Info: Monocolor: Just 12g and printed in <1 hour! Multicolor: See 3mf file Use the provided 3mf files for…
*UPDATE 31.12.25 → Now includes models for 12gauge Shells of the 3 major legnths. Be sure to choose the right variant for yourself. *UPDATE 02.03.26 → Added a blank front face for all variants. Now you can write on it as you please. A…
Two models: One for nine pieces of CO2 cartridges, made for screwing it to e.g a piece of wood One single holder Print with TPU , 95A should be soft enough
INTRODUCING THE TACTI-SHELL FOR ALL YOUR SHELL HOLDING NEEDS Three pieces, print and glue together. Holds 4 shells, which can be oriented either direction based on preference. Designed to prevent shells from falling out while playing…
For years i've had 12 gauge shotgun ammo but no suitable container to store them in, as i've gotten into clay pigeon shooting some of that ammo has a use but again no suitable container to transport them in. So i decided to design my own.…
This is a Remix of MilStrata Manufacturing's bracket to add a grill that matches the Dell 12G Tower Server aesthetic. Two separate models, one with minimal grill and one with full grill. For Dell 12G tower servers, depending on setup of…
This adapter allow to connect hpa tank to chinese asg co2 pistol kwc 941. It's tested and working. Outher thread - M21x1,5 Fill nipple - M10x1 Ptfe gasket - OD 8,8mm x 2,4mm; 3mm thickness (this is crucial part!) Alu tube - OD 6mm x 1mm;…
A shell holder with loops to attache to straps or belts (Up to 1.75"). It holds 5 Shells by friction.
This is a screen cover I made for my BMD 12g Video Assist 7". The face of this is meant to flex allowing for it to be attached and removed without breaking. Printed in bambu labs matte PLA. Angles could definitely be refined for cleaner…
Three models for 12g gram CO2 cartridges. 19.0 mm for a loose fit. 18.8 for tension. 18.6 for a really tight fit. I typically use these to make water torpedos for pool use.
This clip was designed to serve as an alternative to nail-down electrical wire clips. The primary goals were to hold the wire as tightly as possible with only one screw and to be easily removed if needed. The thickness, placement of the…
3 slots CO2 bottles container for safe storage in backpack or side bag. Caution: before the 1st usage use abundant WD40 on treads to ease the coupling. Following the first go no more treatment is required.
You will need 1x GH-301-AM as locking mechanism 3x M4 threaded inserts 3x M4x8 screws or similar 1x M3x16 and nut for adjusting the tension of the mechanism
This was made so I could reuse cheap shotgun shells to make 12 gauge shotgun snap caps. I found some 3D models but nothing that fit. It was designed using Federal Top Gun 2 ¾" shells I printed in ABS and PETG, both with 35% fill and 4…
This is a remix of a 12ga 2 3/4" shotshell I found on Thingiverse (https://www.thingiverse.com/thing:5276446) by Ross2K. I don't have a Thingiverse account, and I can't find Ross2K on Printables, so this is the best way to give him…
I hate having my co2 cartridges dangling at the bottom of a box so I made this solution for storing the cartridges.
This small square thingie makes your used CO2 cartridge look like a bomb. Might be used as a prop for RC planes.
12 ga shell holder allows you to grab 2 shells at once for faster reloads. pass belt over frame to secure it to your bod
this is a 12 gauge snap cap made for jamming practice unless you have a non-12 gauge shotgun its too scale
This is a chamber flag for any 12 gauge shotgun between 2 ¾" - 3 ½" chamber. I have used this on my Winchester SXP and Benelli Supernova with great results on each. The flag features text from all of our favorite red tool company, a…
This is a helpfull friend for a modern hunter. Maximum total lenght of the shell is 60mm. Print with four perimeters and whatever filament you like, glue the clips in and enjoy.
12GA Channel Strut 1 5/8in. x 1 5/8in. designed for use with modeling accessories or hardware. Compare to: https://www.lowes.com/pd/Adamax-Adamax-12-Gauge-Channel-Strut-EG-10-FT/5001905073 CAD models attached.
RackPi Style Mount for Multiple Blackmagic Design Micro Converters (see STL names) on DAP 19'' 2HE MP-1. If a Converter is missing that you need, write me a message and i'll ask some measurements to add it. Tested on this printable…
Belt holder for standard box of 25 count 12 gauge shells with slots for spares. Prints without supports. Should be printed with a minimum of two perimeters, preferably three.
I wanted to use my 9mm laser bore sight on my 12 gauge to help set up a sight. So I built an adapter to drop it in so I didn't have to buy another laser sight. I included the Solidworks file, which can be adapted to yours. There's 3…
For use to bulk load 12ga shells in a 30cal ammo can Print instructions prints best on the side. print the base at 10% infill and the spacers can done with 3 walls and 0% infill
Took the idea from @alignboytw on Thingiverse ( https://www.thingiverse.com/thing:4684057 ) and created the same basic clips for wire spools in 5 sizes. Hope somebody find this useful! Print instructions Category: Organization Summary…
This really can save your matches! It fit's perfectly on the hand guard of a Benelli M4 T-Pro, e.g. Super 90 T-Pro. It's made for 12GA and will work with all sizes (12/65 up to 12/89 also with magnum rounds) You need 2x M4x10 screws. Be…
12 Gauge shotshell container designed with a headstamp to look like a 1930's era shotshell. The true shell would have a brass shell, but this one has been designed to work with the same hull/container as my “sci-fi shotshell container”.…
This is a hybrid of Lubricant LM8UU adaptor for Super Synco Lube DE21030 with screw cap and Linear Bearing Greasing Cap for 12g Super Lube Tube . I wanted to screw on the popular 20130 (85gr) adapter/cap on to a 21014 (12gr) tube, because…
here is a rack for the mini fiber converters from blackmagic, they can be clipped together.
So, here’s the story: I found the aforementioned design and decided to print it. Unfortunately, it didn’t go well, as the parts had no tolerance between them, and the main body and lid ended up fused together. To fix this, I converted the…
A model used for teaching needle bevel theory or just having fun. :)
hi. 12g co2 cartridge key chain. https://www.thingiverse.com/thing:5363190
Full disclosure, this is not a great idea. It makes using the CO2 adapter difficult, there is nothing preventing this from rotating, and getting the fit just right is important. That being said, You have all my files so mod to make it…
Small side hook to attach the converter with a zip tie or a 1/4" screw to your camera. You will need two M3x8 screws to attach it. I printed them in PETG.
Just a reliable tray to hold 25 12GA shells during reloading process or to stock cartridges. PLA/PETG. 0.4 nozzle and 0.2 layer height are recommended. Just set it vertically to print with no need of supports. 150x139.1x35 mm
Original cover was way too thin, flimsy in PETG so I made it about 3mm thick and fixed the STL errors. Enjoy!
Same scoop as the original made by MEYUI but with a shorter handle to save space when camping/hiking/bikepacking.
should make a snug no rattling fit on skadis fits SYNCO SUPERLUBE 1/2 oz (12g) tubes of Multi-purpose synthetic grease.
I've printed in both ABS and ASA. The box fits snug, and with flaps folded its fairly tight. No supports needed, glue on the belt clip afterwards. I use black ABS cement (for gluing abs pipe together) to solvent weld the belt clip on.…
Couldn't find one so I made one. Hope this helps someone else! I recommend PETG for strength... those metal mags get heavy! Remixed from https://www.thingiverse.com/thing:4810168 - Original model by captaINstraiTJacket Category: Sport &…
Ladebrett für die BDS-Disziplin mit SL-Flinte. Hab es mit 2 Wänden und 15% Infill gedruckt.
I designed, printed and painted this 12ga can holder but you can print it using 2 colors if you want. Hope you enjoy it during hunting season
Printed in PETG with four walls for strength at 50% infill.
Uchwyt na 5 sztuk naboi do strzelby 12GA. Uchwyt mocowany na dwa magnesy D16 (M4). Wydruk: dysza 0,2, temp. 210, standardowe PLA.
08/29/25 - Uploaded a second version of this model with tighter thread tolerances (a -.15mm face offset instead of a -.25mm face offset). After using several of the original versions for a bit, I didn't like how sloppy the threads felt to…
A diffusor that can be used with the NiteCore MH12GT or any other flashlight that has a head of 25.4mm wide.
Organize your 12g CO2 canisters in the rifle bag. Magazine will fit nicely the STANAG magazine holders Canisters are snap-fit secured in place.
12 Gauge shotshell container designed with a headstamp to look like a AA Target shell. This one has been designed to work with the same hull/container as my “sci-fi shotshell container”, but also features the updated crimp design on the…
Low and reliable trays to hold 25 12GA cartridge cases during reloading or for ammo storage. Basic and end-to-end version. PLA/PETG. 0.4 nozzle and 0.2 layer height are recommended. Just set it vertically to print with no need of…
I really loved the U Bracket from Andycine for the Ninja V, but they did not make one for the Blackmagic Video Assist, so I designed one in the spirit of that bracket. If they ever make one, I'll immediately purchase a metal one from…
Created in TinkerCAD. If you want to edit it there, it's been made public: https://www.tinkercad.com/things/hkYeHfIrBWW-dreamfyre-dr06-mini-pc-case-top Because the fan of the CPU exhausts through the vent holes on this, PLA may be a poor…
Upgrade your range or field setup with this 3D-printed 12-gauge belt loop holder , designed for secure, quick-access shotshell carry. Made to fit standard belts, this lightweight yet durable holder keeps your 12G rounds firmly in place…
Intended to be printed entirely in TPU. The rings are not round and intended to flex when a cartridge is inserted. It may work in hard filament with a coating of rubber cement on the inside. I wouldn't bother with a metal printing. Print…
ALL FUTURE MODELS WILL BE SHARED HERE: https://cults3d.com/en/users/antirice/3d-models I didn't find any holders for JTS AK 12ga mags that would attach to the Honeycomb Storage Wall, so I made my own! Printer: FLSUN V400 Filament: Duramic…
I broke the chamber flag when trying to use it to rack a semi auto shotgun. So I added a bar to reinforce it.
CO2 Wall Mount. I ended up using a Dremel style tool and sandpaper for a better fit for my needs. Screws used: 4,0 x 20mm Thanks to the original designer! My print settings: Layer Height: 0,2 Perimeters: 3 Solid Layers: 3 Infill: 25%…
12g Chamber flag is a snug fit and wont fall out, desinged to compress as it goes in the chamber. no supports needed.
I wanted to use more quiet fans for my Asrock 4U12G case where I have my 12 BC250 computers in. To install this mod you'll first have to drill the 14 metal plugs holding the front panel to the case and remove it. Easiest way to essamble…
This is a wall-mounted toilet paper holder designed to look like a current Challenger Canada stamped shotgun shell. As a Canadian, these are some of the most recognizable shells that we see on trap night so it only felt reasonable to…
This is a wall-mounted toilet paper holder designed to look like a 1930's Winchester stamped shotgun shell. The top of the container threads off allowing for the reloading of toilet paper, but also won't allow the roll to be removed…
This cheap little 20cm ruler can be easily printed with minimal filament and time cost, on top of being compact and easy to handle. Great for measuring small objects in a pinch. I recommend 0.16mm-0.2mm layer height.
This is a replica of figure G from the box "Dwellers Below", number 2012 from Grenadier (see http://www.cs.cmu.edu/~tpope/sol/grenadier/images/2012.jpg ) Reproduced using https://www.thingiverse.com/thing:1762299 The Yuan-ti first…
I wanted to make a simple toolset for punching out fired primers and reseating new ones in 12 gauge shotshells. I haven't done much testing with different brands of shells but it fits and works well with Winchester Super Target shells.…
Needed a way to mount our Teradek Bolt 4K 12G-SDI 750 RX to the wall. I'm not sure if other Teradek products use the same bolt pattern. 25% infill 4 walls Rectilinear
Simple adapter to allow smaller 8g Co2 to be inserted, requires a 5p piece to be glued in the bottom so that it doesn't get chewed up.
Blackmagic UltraStudio Mini Recorder 12G Wall and SKADIS Mount Mount the UltraStudio Mini Recorder 12G on a wall or SKADIS-style pegboard while supporting the connected cable beside the device. Need a custom part for your setup? I design…
Just used two models to create Nextbase dashcam mount for cameras that have ball joint. Should fit NB and NA up till 2005 (I hope so). Mine is fitted on NBFL MX5. Printed In Elegoo ABS using 5 wall loops and 100% infill, but that might be…
I printed it with PETG, and it works fine as long as you don't apply too much force when using Print with an infill of over 30%. For the last couple of layers, you can print with a different color.
I initially attempted to mount a Monstrum Picatinny Side Saddle to the pic rail of my Benelli Nova 3, but found that it was sitting so high it was obstructing a significant portion of the view through the ghost ring sights.…
*UPDATE 31.12.25 → Now includes models for 12gauge Shells of the 3 major legnths. Be sure to choose the right variant for yourself. *UPDATE 02.03.26 → Added a blank front face for all variants. Now you can write on it as you please. A…
Original cover was way too thin, flimsy in PETG so I made it about 3mm thick and fixed the STL errors. Enjoy!
Two models: One for nine pieces of CO2 cartridges, made for screwing it to e.g a piece of wood One single holder Print with TPU , 95A should be soft enough
This is a device that neatly trims the crimped tops off loaded 12 gauge shotgun shells. There are separate model for 20 gauge and 28 gauge. Mostly this is done to reload shot shells with the appropriate solid shotgun slug, such as the…
This minimalist design is versatile and great for: 🔑 Keychains 🖼 Wall Art ☕ Coasters 🎁 A small gift for cat lovers Feel free to upload your makes!
I printed it with PETG, and it works fine as long as you don't apply too much force when using Print with an infill of over 30%. For the last couple of layers, you can print with a different color.
This fits many 12g changer pierce assemblies, including CCI. It is about 50% thicker than the CCI face seal, and when printed in Prusaflex, it is softer. It starts to seal before the pierce pin punctures the 12g, so you may not get the…
![Atomic fan holder toolhead for SV08 Bambu style [12g] Eddy Compatible](https://media.printables.com/media/prints/1053885/images/7998873_fb6d9039-b3d2-4fb6-97d9-39a433889e15_5a0cda26-165f-4688-8f1b-36ddad0950ea/pxl_20241029_221937440.jpg)
