16 models
It has been designed for a 15mm axle and 110mm space. Designed for 21mm drop outs, so it should be compatible with all the BOOST forks. UPDATE : The V5 version is 5mm taller as requested on a comment from Thingiverse. IMPORTANT: in this…
NEW V4, NOW UNIVERSAL!! It has been designed for a 15mm axle and 110mm space. Used with a RockShox SID Select+ 2020 Torque cap compatible ( THIS IS IMPORTANT ). The skewer must be inserted to secure the bike. I have been using it for…
These plugs are designed to go inside a seasucker HUSKE mount and let you put your thru-axle bike on it. Highly recommend printing this as 100% infill as you want the part to be SOLID. Also recommend a brim and upside down. I designed it…
15x110mm thru axle mount, with clear holes for screws
Other front axle mounts available here are perfectly fine, but i needed one with a bit more clearance for the Rockshox ZEB fork's rebound-adjuster-cap.. So i made this one. Print Settings: PLA+ or PETG 20-30% infill does print fine…
Printing recommendation: Perimeters 3min-6max Enable brim (5mm) Every bike mount needs to be printed at angle so It doesn't delaminate when force is applied. Adding support in slicer is not best solution so I added custom support for nice…
Print 2. It's best to print these at an angle for strength. The include 3MF files print the model at a 45 degree angle with minimals support, 3 perimeters and 15% infill. I printed my set in PETG.
Habe hier eine Halterung für Fahrräder mit QR Schnellspanner oder 15x110mm Schnellspannachse entworfen. Sie dient um die Fahrräder in höheren Autos wie VW Caddy, Opel Zafira usw sicher und bequem zu transportieren. Habe in die Halterungen…
I use this to hold my bikes on place in our caravan. I dont want to have them outside when we drive. Built a frame and atteached it to were the table is attached with this clamps:…
SS Racks. need to print in sideways position with support for a more solid piece, to avoid breaking.
Part of another bigger project, and maybe useful for other mtb fans. I modeled it using several sources and actual hubs, so it's an average all around.
I designed this adapter to fit bikes with a 15x110 Boost Thru Axle to the Thule RastRide bike rack. I printed it out of PC with four wall perimeters and 25% Gyroid infill.
The axle hole is sized at 15.4mm. That was just right with PETG-CF, but you may need hole compensation to match your filament and preference. My old 15x100 axle mount had an OD of ~20.75mm, so this is sized to press fit over that…
Habe hier eine Halterung für Fahrräder mit QR Schnellspanner oder 15x110mm Schnellspannachse entworfen. Sie dient um die Fahrräder in höheren Autos wie VW Caddy, Opel Zafira usw sicher und bequem zu transportieren. Habe in die Halterungen…
Printing recommendation: Perimeters 3min-6max Enable brim (5mm) Every bike mount needs to be printed at angle so It doesn't delaminate when force is applied. Adding support in slicer is not best solution so I added custom support for nice…
