20 models
The metric system is great, but sometimes you need an inch based version. These knobs are for 1/4-in and 5/16-inch bolts or nuts, and can be used in either the male or female version with the appropriate additional hardware (as shown in…
I didn't want to spend 12 dollars and wait for shipping, so I whipped this up based on my fuel lines and images online. It took a few tries to get the width of the central ‘sleeve’ the in the sweet spot. Thin enough to fit, but thick…
This functional 3D-printed laptop stand is designed for the MacBook Pro 16-inch model. It features a separate piece that holds the cables in place, which is then inserted into the main body to lock them securely. This prevents the cables…
Just a basic remix for a Stanley 5m tape measure. I have not tested it as I printed the original one and cut out the needed shape. Any feedback is welcome 21/04/25 After feedback from a maker, it fits the tape well as well as a Stanley 16…
Needed a 5/16in bolt knob for a few projects so I designed one. This was designed particularly for the AMD 5/16in hex bolt from Home Depot. I like to super-glue the bolt in the slot and cover it up with a washer to protect the knob as…
I was wondering about the original stand and I’ve modified to allow more support for a heavier macbook.
A Stand for a 16inch+case macbook pro (I didn't design it it was made by jens j).
A privacy cover/shield for the camera of the MacBook Pro 16 inches 2019 model. It is a tight fit to not have it flop about the whole time. But this might mean you need to scale it according to your printer. There are two files since I'm…
Stand for 2 MacBook Pro M1 Pro 16inch, remixed from an existing model from here. No support needed. For best durability, print it vertical. It is a 3D printable stand that can be used to prop up two MacBook Pro M1 Pro 16-inch laptops. I…
I was replacing the Delta faucet cartridge for our single handle kitchen sink and the instructions specified a 1-5/16 six point socket. I tried to buy one at Lowes and Home Depot stores locally, but they did not have that size. I then…
Stand for 4 MacBook Pro M1 Pro 16inch, remixed from an existing model. No support needed. For best durability, print it vertical. It is a 3D printable stand that can be used to prop up four MacBook Pro M1 Pro 16-inch laptops. I printed it…
Use a decent PLA or PETG for this and it should be able to handle reasonably small loads, such as holding lids down or the like. No guarantees as to heavy loads though.
I needed to mount the hub below monitor, but above monitor stand. You can print one front and one back holder part or two back (standing) parts if you do not need to attach it to the shelf edge. If you need to modify this project it is…
Display case that uses acrylic panels with dimensions 16in x 12in x 6mm and 12in x 12in x 6mm. Extras: 4 x D6A from K&J Magnetics 4 x D64-N52 from K&J Magnetics Remaining panels can be affixed with Magnet Replacement Peg or additional…
Made for the Zephyrus G16, or really any other 16 inch laptop with top/mid intakes. Required Parts 1x Faceplate 2x Legs Optional 1x Mid Leg 1x Brace Some foam to make a seal around the output Assembly I used just standard normal M4 bolts,…
Skate guard for blades lengths 16-18 inch, comment on how to improve! BTW I do short track speedskating
A two piece template to allow you to correctly secure into studs US stud distance is 16 inches Europe appears to use 450mm
Use a decent PLA or PETG for this and it should be able to handle reasonably small loads, such as holding lids down or the like. No guarantees as to heavy loads though.
I needed to mount the hub below monitor, but above monitor stand. You can print one front and one back holder part or two back (standing) parts if you do not need to attach it to the shelf edge. If you need to modify this project it is…
