179 models
Easy-thread, quick-screw (I had to say it sorry) fiesta! A plethora of containers with easy-thread screw-tops. I was not satisfied with my previous creation due to a lack of deboss resulting in unsightly seamlines. Also the walls were…
Big hexagon flower pot mold form 180mm
A number 1 that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…
A number 7 that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…
Spiral Bed Level Test These are Spiral Bed Leveling tests created using an OpenScad File. The OpenScad File is included so you can customize your own Spiral test size. I use these to set the Z Offset on the fly after auto leveling with a…
Easy to print in place. Will fit on a 180mm X 180mm build plate.
A number 2 that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…
A number 3 that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…
A very secure bag clip to close any opened bags. The hinge is designed with low tolerances to ensure a secure fit, and prevent any loose feeling parts. Clip surface is recessed for enhanced grip. The two notch design makes sure that the…
A number 6 that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…
Další dekorační váza z mé dílny, tentokráte lze dovnitř nalít vodu a dát živou květinu. Another decorative vase from my workshop, this time you can pour water inside and put a live flower. Print instructions filament PLA 0.1mm detail…
A number 8 that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…
A number 5 that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…
A number 0 that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…
Sharing these files to make it easier for anyone with a small print bed who wants to make one of these roll-up roses. Overall, the model is scaled down 80% with a minor modification to the thickness of the rose petal part. Follow the same…
A number 4 that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…
Tape peg board holder 180mm wide. For 1 by 1-inch peg board. Please see my other pegboard tools and holders in my portfolio. Thanks for your likes and downloads.
I wanted to print the original model on my Prusa MINI, but it wouldn't fit the smaller build plate even when rotated...so I edited the file by chopping off the corners so it would fit! You will still need to rotate the model to fit…
Print in PETG or TPU, the jaws are printed face-down so the gripping surface can match your print bed (use smooth bed for smooth jaws, textured for texture, etc). Geometry was 3D scanned from the tool for precise fit, this should easily…
Big boy ( girls ) sized planetary gear. Print in place with 3mf file. Just load it - layer height I recomment 0.2mm but higher also works - and print it :) It can be printed on every printer with a printbed size of 200x200mm. Height is…
A number 9 that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…
3030 Extrusion and a coupler. The goal is to find a way to print and replace aluminum extrusion in printer builds. Why? Well, to do it all with printing. And the extrusion is cheaper this way. Printed out real nice but joining these parts…
This is a conversion for the KP3S to Vzbot 180mm. This can also be built just as a 180mm Vzbot, just designed the rails to use the rails from the KP3S and the KP3S bed. I have included a STEP file for people to use. The original design…
Made an organizer for our bathroom cabinet (Ikea Enhet 130cm depth) Easy to print, and should fit most bathroom cabinets of other brands too. Wall Thicknes is 2mm. Wall Height is 40mm. + additional 2mm Floor Thickness (Total 42mm Height)…
The template is has a diameter of 7.1" and offers diameters from 10 to 180 mm/0.8 to 7.1 inches, which makes it ideal for drawing various arcs and corners. Its slim design allows it to fit into small toolboxes for easy portability. It can…
Schachtel mit Deckel. Abmessungen Innen: Länge 180mm, Breite 120mm, Höhen von 30mm bis 100mm. Gedruckt mit PLA ohne besondere Einstellungen ……………………… Box with lid. Internal dimensions: length 180mm, width 120mm, heights from 30mm to…
Remix of a Remix, I have removed 15mm from the front wings so they do not interfer with the base.
A letter B that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…
WORK IN PROGRESS! Now its possible to install one or two Fans with each maximum 180mm. Be sure to use 24v Fans or install a step down converter (buck converter) to reduce the Voltage your specific Fan. The mainboard supports (i think)…
Quick heads up: These remix designs were somewhat “intended” for the case being positioned on the X-max end (right side) of the LR3 gantry. If you are planning for placing it on the X-min (left side), then the only concern with simply…
Air Hose Adapter for 125mm to 180mm, outer diameter, no support required german version below Dieser Abluftadapter hat an der kleinen Seite die Möglichkeit einen 125mm Abluftschlauch anzuschließen, auf der anderen Seite ist der äußere…
Community tested as I don't have the right spool and have designed this on request! “Scale to 99.95%” Medium-sized 500g spools do not fit on the Bambu Lab X1 AMS, because the spool itself is driven (wound/unwound) by rollers which engage…
This print is intended to test the full z-axis print volume of the Prusa mini at 180mm. It is a test tower with a width of a single layer designed to show if there is wobble at different heights on your printer. Print using the “Spiral…
Similar models what i found, did not fit to my printer table (180x180), so i made new model :) I print it in position as on screenshot, with supports only for wide part. At first i was afraid that the part would break in a thin spot above…
A useful little helper for woodworking
This is a custom fan sled design to handle the problem of the provided metal fan sled with the Fractal Design Torrent not accommodating the massive Arctic Liquid Freezer II 420mm AIO's thick radiator. Without this, the radiator sits on…
I upgraded cases and realized I couldn't use an AIO with the Torrent case. So I designed a bracket to mount the AIO to the front 180mm fans. It seems to work well. I designed it to print with supports on build plate only. I would also…
I have non-standard ventilation duct in my basement that is square and made of wood, with an outside diameter of 180mm and an inside diameter of 140mm. Hence, the wooden frame around the outside is 20mm thick. I have a need to remove…
Remix of DAVEfromCZE's spool adapter, You can use it for 1Kg Flashforge's spool (180 mm diameter), it's 4 mm shorter than DAVE's one to avoid that the Flashforge spool to touch the AMS cover.
the perfect comb for long hair with a lot of heart Please leave me a like if you like it. It costs you nothing, but it helps me enormously. THANK YOU!!! -------------------------------------------- Der perfekte Kamm für lange Haare, mit…
This is a Xiangqi (aka Chinese Chess) board and pieces, targeting the Prusa Mini. It fits in the build plate by nature of being sliced into parts with connectors between. It is multi-colored based on layer changes (for the playing pieces)…
This is an adapter for the 180mm EasyPrint (Prima Creator) Spool to the 200mm spool size used in the Bambu Lab AMS. Just print it and snap it on. Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 15% Custom Section…
Small bin best printed with "fuzzy Skin" in prusa slicer
See the whole Zen Garden Set!! https://www.printables.com/@TripleGWorkshop/collections/764364
Update 9.18.24: I re-uploaded 270mm and 540mm files because there was a dimensional error. Also tested on Bambu P1S in PETG, but I still recommend ASA for UV resistance. Printed on QIDI X-Smart3 with QIDI branded ASA filament on default…
A letter A that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…
An adapter to replace the Fractal Design 180mm fan with a 140x25mm fan. Comes with 25mm spacers so the original screws for the 180mm fan can be used. The height of the adapter itself is 13mm so the fan's height is the same as the 180mm.…
My printer has a 180 mm table and I was not able to fit the front and rear base so I have remixed them in order to fit. All the model dimensions are the same as the original except from the lower frame that has been cropped and the holes…
Use 3x6mm magnets. The hexagons holes allow you to get them out easier if absolutely needed. But you do need to hammer/press them in. No glue needed. Printing You do not need supports for the hexagon hones, this was able to be printed…
Music stand tray: High: 67mm Lenght: 180mm Depth: 55mm Brim: Yes Supports: No Resolution: 0,2 Infill: 20% Wall: 3 Wall thikness: 1,2mm Filament color: Black Filament material: PLA
3Dsets style links. Lets you adjust your suspension on 3Dsets cars. Ball not included. 35mm to 180mm. ________________________________________________________________________________________________________________ Black Crow Axles on…
Base pour panier en crochet de 180mm de diametre. Composé de 40 trous circulaires de 10mm. Hauteur de 5mm mais modifiez si vous le souhaitez, à partir de 3mm c'est sufisament rigide. Crochet basket base of 7" diameter. 40 holes of 0.4"…
This design is a remix/remake of the original model by 0161design , which I really liked but couldn’t fit into the build area of my printer. To solve this, I split the model into three parts and added tongue‑and‑groove joints for quick…
A simple 180mm ruler with metric scale.
I wanted a simple arm bracket from which to hang my RC planes, this model lets me hang 1x 1.5m span, and 3x 1m - .6 spans. With a mix of traditional, ‘V’ and 'T' tails. Mounted with 2x rawl plugs and 2x drywall screws. Mines printed in…
Emergency spool for 180mm build plates with inner diameter of the Prusament spools (and many others) and compatible with Bambulab AMS (inner hole diameter is 55mm) I call it ‘emergency’ because Prusament spools are usually taller than…
Remixed to fit 180mm face mount rings without creating an annoying raised shoulder.
Use a water/UV resistant filament like ASA, PP, or PETG; don't print in PLA. I recommend at least 35% infill and annealing after printing for maximum strength. measures 180mm between the screwhole centers.
English： The picture is an old model I designed before. The current MK02 file is a new model that has fixed many problems. The model file is a scrap collector and a 180mm heightened baffle. You can use A1m to print the whole part [Of…
When 150mm is small and 250mm is too big. The answer is 180mm :-)
Just a cool deco tree hope you like pritable without supports testet with an Ender 3 s1 Pro and a Bambulab P1S.
Y tool had the wrong size for Micron 180mm but it was such a good tool compared to the other jigs because you just pushed it up against the extrusion to get the right length. I decided to duplicate it for the X and Z extrusion alignment,…
This is the latest Alpha - holey- Single part Frame V1.5.3MF updated to fit a Prusa MINI+. The measurements are 180mm x 180mm compared to the official frame with a size of 191.7mm x 193.11mm. The size for board, motors, rails mounts etc…
4.5 mm ball bearing Ordered this one: But be careful mine was send open. So I had to pick up a lot of balls. If you like to, check out my other designs too!
Easy to print. No supports needed. Depending on your print bed adhesion a brim may be used. Will fit on a 180mm X 180mm build plate.
Rotating Work Table 180 UPDATE : 16 Feb 2025 - added optional Adjustable height Base that goes from 100mm to 200mm. Can be used with other Model Turner variants. Just a simple update to my Model Turner giving it a simpler redesign, making…
Mount your 180mm fan to 6" flexible ducting. Print Settings Rafts: No Supports: No Notes: print with flat side down, no supports needed Category: Other
Found it helps to keep some of the bathroom drawers organised with boxes for items like cotton balls, Q-tips, etc. This box is a simple structure and simple to print. 180mm long x 130mm wide and 90mm tall. Printed in ABS+ using typical…
360mm fan shroud, fans must be all in one or connect to a rad to allow for this to mount correctly. Printed in PLA but suggest stuffer material if mounting at the top of pc case.
This is a wall support for an Random Orbital Sander Support. I glued it with epoxy to my wooden wall. You can remix it to add screw support, or ask me if you need it. Size available: 125mm - 150mm - 180mm Medium (10mm thickness) and Heavy…
My version box for screws and small parts. Top and bottom printed with 0,8 nozzle, clip with 0,4 nozzle. Do you need 6x M3x30 screws Enjoy
This is a laptop stand for a laptop that is up to around 2cm in width. Its primary draw is that it can hold a 180mm fan that is 180x180x32mm in size, although other size fans could probably fit if you forgive the fit not being perfect,…
8 screws are required. It is best to use short 3mm wood screws. 120,5x120,5 Rectangular hole in lid required
Print with 0.2 mm layer height, supports are needed only for the hinges. It holds together with the snap fit prongs, but it can alternatively be glued together using a glue gun if needed (for me it wasn't needed, the snap fit holds really…
Couldn't find any stacked skadis pegboards so I made one up in the slicer quickly. I'm guessing it's because it's much cheaper to just grab it from ikea instead. Did this with wet filament across different brands as a worst case scenario.…
The hole dimension 180 mm (measured at the center of the holes) is for the short lines. It fits on the roundabout and diagonally into the printer. I constructed it for my kids. I was inspired by another murble run: Lena Cascade murble…
A simple rake head, with 2 variants. One for a 21mm handle and another for a 16mm handle (kids size). I enabled supports just for a clean head-to-handle cosmetic advantage and also for the screw hole. I just used snug, very simple to…
180mm aluminum bed is cheaper and easier to come by than the the Voron 0 bed. I got this for around $8 from Taobao that comes with heating elements and thermostat and an extra spring steel bed sheet for another $6. Extra wire harness file…
I was not able to print the original model in my printer because my table is 180mm x 180mm so I have remixed the model to fit in 180mm tables. I kept the basic parts, the tips and the screwdriver. I also added two hinges on one side and…
A tool for unlocking the larger Ubiquiti UniFi 180mm (larger) access points, like the AP AC LR. It is a tight fit because it needs to be to release the catch as much as possible. It can be put on a keyring. I printed in PLA+ at 100%…
Schachtel mit Deckel. Abmessungen: Länge 180mm, Breite 100mm, Höhen von 30mm bis 120mm. Gedruckt mit PLA ohne besondere Einstellungen ……………………… Box with lid. Dimensions: length 180mm, width 100mm, heights from 30mm to 120mm. Printed with…
I used the Cut and Merge tools in PrusaSlicer 2.5 to make these models. Hole sizes are unchanged except where intersected by cuts made to resize the model. I am still in the process of printing these for the first time. Be sure to let the…
Use for this Model A sturdy, long (around 180mm) shelf. I used T-nuts (details below) as this kept things sturdy but didn't have to make it overly tall. Having used the nice Bambu Lab Hotend Box (link below) for a while, I eventually…
No tools needed. No other parts (screws, etc.) needed. Print with PETG. For minimum material consumption use no bottom and upper layers, 4-5 perimeters. Only 89g of filament used. Update 2025-12-13: Ribs were added for better filament…
Designed for ventilation openings in windows and balcony doors. Diameter is 180 mm. Its adjustable structure allows it to be closed in bad weather. For installation, 1 × M4 bolt (the bolt length depends on your window modification;…
I designed a fan bracket to mount two large 180mm fans to the top of the Qube 540 case! Since it's a pretty large part, I split it into two halves that you can print individually.
Simple split of the 220mm base from @STORM DESIGN's Modular Winder Frame 2 so that the project can be completed on mini printers with 180mm beds like the Prusa Mini, Bambu A1 Mini, Voron Micron, Rat Rig V-Minion, etc. No glue required -…
Festool MFT/Parf style small section of fencing to be used as an out-feed support, or small fence for additional support for longer parts. Can be used by itself, with a different rail setup, such as a rail section mounted to the bench.…
A remix optimized for a Drawer I made to fit the dimensions of the Prusa MINI+. Just shortened the rails to 180mm since I wouldn't need those extra 20mm @Markus_27799 designed in the shortest rail. Added a Left and Right version with…
This is a bed leveling test mesh to test bed leveling and z-offset to ensure proper bed adhesion. The 16pt mesh is constructed of 16 16mmx16mmx0.16mm squares in a 4x4 grid with 1.6x160x0.16 lines connecting each grid element to provide…
Same deal as original but trimmed and re-parted to fit 180mm printers such as the A1 Mini.
Turn table with 10° indication marks with a 0° reference point. Used to take photogrammetry pictures. constructed around a bearing 40/68x15 mm. the base has extra dove-tail cut-ins to receive DIY accessories of your making.
This is a full modeled gridfinity junk drawer combo. the only assembly needed is for the base plate. the mid section contains 4 holes on each side which you connect the other end pieces to using the printed dowels. Total filament used is…
The keystone was rotated to be horizontal to clear space with electronics. Note: I use the FT EMS mod for my Micron's electronics bay, so I can't guarantee that that this mod will work perfectly with the default electronics arrangement…
The wheel broke on the weekend, printed a new one in PETG until the replacement arrived, ended up holding the season. It broke when the trimmerline hit it, it held up until then. Printed with 6 permieters and 25% infill. PETG from…
Simple brake disc clock for 180 mm brake discs
Ein Streckenverbinder mit gedrucktem M6 Gewinde für Aluprofile 30x30, Nut 8mm, Typ B. Je nach dem, wie stabil Ihr sie wollt empfehle ich 3 Perimeter oder mehr. In Onshape mit der Suche nach “Aluminiumprofile” zu finden.…
ACPS First Layer Adhesion Test Model 220x180mm 0.1/0.15/0.2/0.3mm layer heights
