Counting matching models…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, buying me a coffee would be a wonderful show of support! Good quality designs take time, effort, and CAFFEINE! ;-) And then check out my other models for…
This model is compatible with the lego system.
This model is compatible with the lego system.
Petřín Lookout Tower, one of the most prominent landmarks of Prague, was built as part of the Jubilee Exhibition in 1891 as a loose copy inspired by the Eiffel Tower (at a ratio of 1:5). It is 63.5 metres high, and 299 steps lead to its…
Fan Art Clock of Miss Minutes , a character in the television series Loki produced by Marvel Studios . You can use the clock as a wall clock and as a table clock. The clock has a size of about 155 mm x 170 mm x 26.8 mm. The dial has a…
This model is compatible with the lego system.
HueForge - Emblem des Fußballclubs VfB Stuttgart 1893 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Jade White…
This model is compatible with the lego system.
A replacement battery cover for Denon RC-1192 remote. Printed in PLA, but I think that PETg or ABS will be good too. Print instructions Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 100% Filament: Any PLA
Based on this design from reddit! I used a piece of 110mmx40mm sandpaper and a couple of m3 screws. Does it work? Kind of… Is it cool? I think so.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Step back in time with this meticulously crafted chess set, inspired by designs from the Russian Empire between the late 18th and early 19th centuries. Perfectly fitting a 45mm field size, these pieces echo the elegance of the past with a…
Fiat 3,5 HP year 1899 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
While you can cheaply order more shells from Ali Express these can just be self printed. They miss the rubber at the bottom and are a little shorter but i didnt see any worse performance. Them being slightly shorter than the original…
This model is compatible with the lego system.
A small combine I made for my Dragonwood & Pacific railroad, loosely based on the (albeit narrow gauge) combines used by the United Verde. While it's freelanced, it's probably as realistic as it gets. I read way too many primary documents…
This model is compatible with the lego system.
This model is compatible with the lego system.
LEGO Mercedes D W189 Cabrio
This model is compatible with the lego system.
maximera nahradny drziak, ktory drzi vrchy hrncov v kuchynskej linke od ikei supporty su uz spravene, treba odrezat potom
I created this set of models to replace the stock vacuum molded tray that comes with the Deluxe Edition of Puerto Rico 1897 Special Edition published by Alea and Awaken Realms. It is comprised of a 'stack' of three parts (Coin Tray, Shim,…
This is a set of removable components to form an insert for World's Fair 1893 . It consists of: A tray for coins/medals A tray for the cards (sleeved or unsleeved) and small pieces (ferris wheel car and round marker) A tray for the…
Designed this to hold my Bondhus hex drive set ( Amazon ). Will probably work with other sets, but have not tried them. Print the Hex Drive Storage file and Mount. The mount uses m3 inserts. Connect the two parts with 3 m3 x 10mm screws.…
Fits for Gardena garden shower type 18911-20 and 18910-20 (Front of showerhead ca. Ø58; neck ca. Ø35,5mm) Possible materials: all materials possible, Asa or Extrudr Greentec because its UV-Stable Reccomendet Nozzle-Ø: 0,4 Printable on…
Circus of the Past - Ringling Bros. - Mamie The Giraffe Wagon - 1893 3D printable model.
Daisy Model 1894 Plunger Spring Removal Fork. May also Fit Models 95, 99, 499, and Red Ryder.
I merged my Scopemeter connector with an IR189(USB) connector to use these for connecting to the device. Now the much cheaper IR189(USB) cable can be used instead of the very expensive OC4USB cable. Electrically both cables are the same…
This is a replacement stand for my Fluke 187/189 multimeters. They used to be sold on ebay, but no longer, so I created my own. I recommend PETG, as it will be flexible and robust for normal wear and tear. I used Overture PETG 1.75…
This insert will fit: the base game (English/French version) If anyone has any requests or ideas on how to improve it, please let me know. If anyone feels like supporting me so I can get more pla and do more inserts: Donate (paypal.com)…
An assortment of connectors designed to fit the Molex 0.093" 1190 and 1189 series. Data sheets for each are provided by Molex here: 1189 (Female): https://www.molex.com/pdm_docs/sd/002092101_sd.pdf 1190 (Male):…
Lego Man Toilet Paper Holder - TSG 1899 Hoffenheim
Simple replacement ("upgrade") for the Ferris Wheel token in World's Fair 1893 . I've tried to copy the style you can see in the pictures in the Wikipedia entry for the original Ferris Wheel. Print instructions Resolution: 0.15mm Infill:…
Baseplate which holds up to 4 SPF5189Z Amps or Filters The outer holes fit the holes of chinese 8W WIFI amp. I use it to amplify a Hack RF One signal to drive a QO100 station.
Circus of the Past - Oddities - PT Barnum's Armless Wonder (Charles B. Tripp) & Legless Acrobat (Eli Bowen) - 1890's 3D printable model.
Note: This module is NOT for sale. I don't allow you to print this and sale it. This is free and you should keep it this way . I made it free because I wasn't able to find it online. I found one but it was badly made so I decided to…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm !!!! It appears you have mixed filament types. Be certain this is what you want. !!!!! Swap Instructions: Start with Blue At layer #9 (0.8mm) swap to White for…
Just a rough couple of 3d models.
I converted the CR Flamengo 1895 coat of arms (escudo) image into an svg format, then exported it to Fusion 360. It measures 180 x 152 x 6 mm Add gcode to change filament at the following layers: Start with black color Change to red color…
After I stumbled across the original patent for the golf tee I just had to try it out. The design is simple and prints easily with no support. The design does work as intended but if you are looking for something more modern and…
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
A holder for the Bondhus T-handles sets where the tool can be retrieved from the top or front, allowing room for other tools around the holder. The holder can be assembled by through a sliding mechanism, it also features a French cleat on…
[Zink und Posaune : Studien zu Überlieferung, Instrumentenbau und Repertoire page 153 Fig. 6: Zeichnung des Original-Mundstücks von Lübeck St. Annen-Museum 1893.59 im Maßstab 1:1. (Zeichnung: Graham Nicholson) Fig. 6: Drawing of the…
Miss Minutes from 1893, Remixed to go with my other “Loki" model prints.
Made it fit the battery tester BT-189. Designed in Solidworks. Has some minor chamfers for easier placing of the tester PLA works fine. Gridfinity is an invention of Zack Freedman .
Thank you Tomek for your idea to bolt bridge! I used this to modify another ukulele
it looks like it says 681 but its upside down
For knocking Jenga pieces out of the tower..... or flattening flys. Will it print? Probably. Will it work? Maybe. I really don't have time to print everything I design. Loosely based on the 1894 Bergmann number 1 automatic pistol. Is it a…
1891 NAGANT PISTOL LIGHTER SLEEVE FOR BIC LIGHTERS
lego 6990 73825 28974 4070 18986 87087 47905 26604 4733 3386 32952
Could not find what i needed so I created my own. It's a 1x3 gridfinity storage for a BT189 Battery Testing device. I made this using the gridfinity tool to be found at https://gridfinity.perplexinglabs.com and then created the space for…
lego 3867 3811 2628 2629 15624 18922 71772 69958
This beer mat can be printed as a whole using an MMU or similar or print the parts individually and glue them together afterwards. (A well adjusted printer is necessary as there are no tolerances between the parts) I also have coasters…
My insert for the board game Bruxelles 1897 . Designed to fit sleeved cards. I've tested it with Gamegenic Standard sleeves, but there should be some leeway for even slightly taller sleeves. Version differences, which variant to pick?…
This model is a direct swap replacement for a vacuum molded tray from Puerto Rico 1897 Special Edition published by Alea and Awaken Realms. The stock tray is excellent and fit for purpose in storage. I prefer this on the table as it is…
Remix of Fluke 187/189 Accessory Mount by MozamPete. I wanted the bottom to be flat so I didn't have to worry about printing supports because I'm not very experienced with using TPU, and I didn't need to clip in a magnet or anything. I…
Clock for Miss Minutes 1893
I Printed it without enclosure with Prusa MK4S Material: Fiberlogy Nylon PA12 Layer height: 0.2mm Perimeters: 8 Infill:100% Supports: Yes Draft shield: Enabled Brim width: 10mm Satin sheet Heatbed temp 110c Nozzle temp 265c Printing…
96mm center to center toe link, modeled after Traxxas 9189. You will need "hollow balls" and press them in. I reused my
YOU NEED THE NEW BODY FOR THIS TO WORK!!! remodeled the guide part to make it more sturdy, angle locked and with a clamp to hold down the knife. The spacer part can be use to raise the overall guide. good for clamping down thicker knifes,…
That clip? that keeps cords neatly coiled. Don't know what exactly it's called. No support needed.
This is just a replacement for the original Fluke adapter. We often lose them at my work so I just modeled the replacement. It fits the Fluke IR189USB IR serial interface and works with 187, 189, and whatever other Fluke multimeters this…
Adapter to mount a Magnetospeed on a Marlin 1895 SBL Lever Action Rifle. No additional screws needed. Just use the ones that are delivered with your Magnetospeed V3. Printed with my BambuLab A1 PETG 0.4 Nozzle
Zeige deine Leidenschaft für Fortuna Düsseldorf mit diesem beeindruckenden LED-Leuchtschild! Dieses Schild ist 106,5 cm breit und die Buchstaben sind etwa 15 cm hoch, perfekt zum Aufstellen auf einem Tisch, Boden oder zur Montage an der…
nachdem das original Teil gebrochen ist, habe ich es anhand des original ersatzteils nachgezeichnet.. nicht 100% aber passt.
Simple tyre mount for Lego wheels and Ranglebox/Repeat Hubs. Tested in TPU 95A without any issues, but not tested in full combat yet. I'd superglue the Rims to the tyres once installed fully, its quite difficult to get them to seat fully…
Leider passen die originalen Schienen des Antec P182 nicht am Delock USB3 Hub. Kurzerhand wurden 2 Schienen modelliert und ausgedruckt. Die 2 vorderen Schrauben mussten einem Zapfen weichen, da der Platz nicht gereicht hat.
A simple mockup for the wolfcraft 489 000 hook blade. I've created it to test my Sustainable Safe (Balloon) Cutter Knife .
Printa i PLA, 0.15mm quality. Välj höjd genom att alternera Z i slicern.
I keep my batteries in a cabinet with the button cells taped to the inside door, I got this nifty battery tester off of Temu and made this,home for it with the button cells. It's amazing when a device has a special home how much more…
Letion LE-189D Holder Halter Buy me a coffee Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: No Supports: No Resolution: 0.2 Infill: 15% Notes: English: The Flashlight is easy to insert and remove. German: Die Taschenlampe…
Fridge Eggholder for Hanseatic HFD18983CI / Ikea Ribbenås Mirror file to get the other half Kühlschrank Eierhalter für Hanseatic HFD18983CI / Ikea Ribbenås Datei spiegeln um die andere Hälfte zu bekommen
Dieser Stahlgittermast entspricht dem Modell des 1896/97 errichteten Mastes der Bernburger Elektrizitätswerke. Er eignet sich ab Epoche Ic für Freileitungen zur Stromversorgung oder für Straßenbahn-Oberleitungen. Text der…
Replacement part FERCO 18939 I recommand to print in NYLON or ABS. Printing in PETG works well. The standard model is 9mm height. The slim model is 5,5mm height. Print Settings Printer Brand: Prusa Printer: I3 MK4 Rafts: No Supports: No…
A drawer organizer insert designed for spice jars , helping keep your kitchen drawer neat and well organized. The insert measures 189 × 102 mm and is ideal for neatly arranging spice jars so they don’t roll around inside the drawer. Its…
After about 12 iterations, this finally came out right... This nifty slide-on attachment will allow the Icy Box IB-189U3 M.2-enclosure to run full-length drives. I printed it in MSLA due to the tight tolerances, FDM might need some work…
This is a mounting bracket that will attach your Gardena Rain Sensor Electronic (model 1189-20) to a fence or utility pole. I designed this to be easily printed without supports. There are some drainage features to prevent water from…
tile organizer for 1893. you need to print 3 of the trays and one lid. Tried something new with the lid that I really liked and will probably upgrade all my older designs to. As usual it has my steel and magnets embedded in it. Category:…
White until 6mm Blue until 7mm P.S. Don't worry about the textured parts they will go away when you print
A detailed 1890s steam coaster featuring a single funnel, derrick masts, and well decks. Inspired by real-world coastal vessels, this model captures the era's industrial aesthetic with clean, unlettered paintwork. Print at 100mm length…
A holder for the Garden 1189 Electronic Rain Sensor to mount it on a wall or a fence. I printed it in ABS because of the better heat and weather resistance. On the top there are 2 holes in the thread to be cut. I took M3 stainless steel…
Its not optimal to print, multiboard pegs need to have support, but it work fine.
ARTE&DISIGN GT189 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
Simple part I made to keep PPS/APS shells from chambering too far forward and causing feeding issues.
![#0189 [UPDATED] Fanout Playing Cards Case, now V2!](https://media.printables.com/media/prints/1090799/images/8248226_31e1db75-300b-4dfb-8308-7f723ad0b955_671b0708-4fe4-4b42-958d-5f25b65b4dea/rl-20241128-007.jpg)
