Counting matching models…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
6/1/25: I'm adding a version with no interior (DodgeRamFull) which should be safer for kids. It prints slightly faster as there is less perimeter. The NewDodge version is nicer but when pressing on the cabin (or falling on the floor) it…
Modelo base sin cortes. Si por algun motivo los neumaticos no se imprimen correctamente he subido un archivo independiente para reemplazarlos. Trabajo en un mejor version tipo Kit card
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
3D Printed Model of a Countach
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Mr. Fusion design from XRobotos/James Bruton (https://github.com/XRobots/Mr-Fusion), slightly modified here and there and improved for printability. Suits printers with build volume as small as 15x15x15 cm. Assembly requires gluing with…
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
BMW R80 Monoshock Road 1985 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
3D printed IMSA Mustang shell body
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Rock Bands - Iron Maiden - 1985 3D printable model.
Stingray - Nick Mancuso with 1965 Corvette C2 - 1985 3D printable model.
This is a wall mount with a 45 degree angle for the 1985 lego batmobile
Fright Night - Peter Vincent (Roddy McDowall) - 1985 3D printable model.
Sci Fi Movies - Enemy Mine - 1985 3D printable model.
MacGyver - Peter Pete Thornton - 1985-1992
Diseño El modelo del Caprice 1985 está cuidadosamente detallado para capturar la esencia del coche icónico de esa época. Uso Ideal para coleccionistas de coches antiguos y entusiastas del modelismo en miniatura. Recomendaciones de…
Fright Night - Amy Peterson Bust - 1985 3D printable model.
A 1:1 replacement for the front suspension arms on the Tamiya Fox buggy. Printed at 0.2mm on the Creality Ender 3 100% infill I used PLA, but you can experiment to see if other materials make it stronger.
Fright Night - Jerry Dandrige (Chris Sarandon) - 1985 3D printable model.
Horror Movies - Reanimator - 1985 3D printable model.
Fright Night - Evil Ed "You're so cool Brewster" - 1985 3D printable model.
Fright Night - The Bat - 1985 3D printable model.
Horror Movies - House - 1985 3D printable model.
Cocoon - Walter (Brian Dennehy) - 1985 3D printable model.
Cocoon - Jack Bonner (Steve Guttenberg) - 1985 3D printable model.
Cat People - The Leopard Tree - 1985 3D printable model.
MacGyver - Penny Parker - 1985-1992
Mickey Spillane's Mike Hammer - Mike Hammer - 1984-1985
This is my teams own custom Odometry that I designed to fit our robot perfectly, so I included the step file so you can edit it to fit your robot should you wish to do so. I 3d printed these but if y'all want to laser cut it that's also…
I Printed it in pla using a 0.4mm nozzle without any support.
Mickey Spillane's Mike Hammer - Velda - 1984-1985
Since I did not want to pay 5€ for the new part or wait a week for shipping, this design was created. I hope it is of great use for you! I printed this part using generic PETG using 100% infill on my Prusa MK4S.
Soporte para montar un JBL Charge 5 en el soporte original del espejo central en un Suzuki Samurai 1985. Se monta con tornillos rosca madera de 4x60mm de largo que refuerzan el soporte para no partir con las vibraciones del coche. El…
Dungeons & Dragons - Lizardman - 1983-1985 3D printable model.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Mickey Spillane's Mike Hammer - Lawrence D. Barrington - 1984-1985
This Thing is a replacement for the main gearbox body for the trunk lid pull-down assembly in my 1992 Cadillac deVille, reverse-engineered from the original part (as mine broke in several places, due to age and excessive mechanical…
My models aren't perfect, but they're fun! Requests and exclusive models available with club memberships. Enjoy!
Mickey Spillane's Mike Hammer - Captain Pat Chambers - 1984-1985
Retainer clips for 85-90 Firebird Formula and Trans Am equipped with the Aero Spoiler. Print with ABS or something stronger. 6 pieces required.
Lose one of the track supports for your old Criss Cross Crash set? No worries! Just print one!
I printed it in PLA+ Using an 0.4 Nozzle
Lose one or more of the track connectors for your old Criss Cross Crash set? Put away that tape and print yourself some replacements! I believe they also work with Turbo Trax sets as well but I'm unable to test that. I tried to replicate…
This gearbox interfaces the three different worm gears on the sunroof mechanism for an early Porsche 944. With these cars now 40+ years in age, the original plastic gearboxes are starting to crack, and in cases like mine, disintegrate…
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. 200x200x2mm
These are dashboard clips for an Oldtimer. The Ford Transit MK2 (1985). The old clips breaks due the process of long aging and the dashboard cant be secured. These clips fit perfectly into the opening and are secured by the long plastic…
This armrest design clips right into the location of your old one without any modification. STL files are included for convenience, but you should use the STEP files for you print!! There are two variants: A slick, basic armrest A…
Made for my stepfather's vintage Harley-Davidson 1985 full dress touring classic FLTC. This gasket sits in a side panel that goes around the oil filler tube, and keeps the tube from damaging the fiberglass bodywork. He was looking for…
In the Ford Transit MK2 (1985) with the dashboard that has a recess for a speaker, I have constructed an insert holder for a BOSE Revolve+. The Mobile Speaker fits perfectly into the insert and can be used as a Remote Soundspeaker in your…
Used butyl in joints. Wallet magnifier was purchased at Joann's. Buy Bitaxe from; https://www.solosatoshi.com/ https://d-central.tech/
This is a reproduction dome light is for a 1958 Edsel. More specifically, this one came from a 58 Edsel Pacer. It was printed in white to match the roof color, but you can choose any color. I used ABS for the frame, but you may also…
Numbering 1-6 is the ordering of trim , left and right means side of the car. These sections may be too long for most printers , recommend cutting the strim sections in half and print them vertically. Fitment may need a bit of altering…
its a dodge ram charger for on you're wall
replacement knob for the dash of my brothers rx7
((((((((((((((((((((((((((((;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
to replace the cracked or degraded originals like in the picture. Fits early-generation transaxle models equipped with the early sunroof mechanism: Porsche 924 and Porsche 944 Early generation.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
In the Ford Transit MK2 (1985) with the dashboard that has a recess for a speaker, I have constructed an insert holder for a BOSE Revolve+. The Mobile Speaker fits perfectly into the insert and can be used as a Remote Soundspeaker in your…
This model is compatible with the lego system.
Ladyhawke - Etienne of Navarre - Rutger Hauer - 1985 3D printable model.
Stingray - Nick Mancuso with 1965 Corvette C2 - 1985 3D printable model.
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. 200x200x2mm
If you want to get this template without subscribing, write me in chat! - SideSilhouette
The Breakfast Club - Judd Nelson 3D printable model. Super easy to print, just adjust size to your needs and go!
Silver Bullet - 1981 3D printable model. Easy to print. This is a very large model and will take a long time and a lot of material to print.
Back to the Future - Doc & Marty - 1985 3D printable model. Prints in 3 parts. The figures, the car, and the base. If you change the size of one part, you will need to adjust sizes on all parts to match.
Commando - Matrix Luggin' the Log - 1985 3D printable model.
Ladyhawke - Etienne of Navarre - Rutger Hauer - 1985 3D printable model.
Fright Night - Peter Vincent (Roddy McDowall) - 1985 3D printable model.
Fright Night - Jerry Dandrige (Chris Sarandon) - 1985 3D printable model.
Back to the Future - Marty McFly (Michael J. Fox) - 1985 3D printable model.
Back to the Future - Marty McFly (Michael J. Fox) - 1985 3D printable model.
Back to the Future - George McFly (Crispin Glover) - 1985 3D printable model.
Back to the Future - George McFly (Crispin Glover) - 1985 3D printable model.
Back to the Future - Biff (Tom Wilson) - 1985 3D printable model.
Back to the Future - Biff (Tom Wilson) - 1985 3D printable model.
Back to the Future - Emmet "Doc" Brown (Christopher Lloyd) - 1985 3D printable model.
Back to the Future - Emmet "Doc" Brown (Christopher Lloyd) - 1985 3D printable model.
Back to the Future - Lorraine Baines-McFly (Lea Thompson) - 1985 3D printable model.
Back to the Future - Lorraine Baines-McFly (Lea Thompson) - 1985 3D printable model.
Back to the Future - The DeLorean - 1985 3D printable model.
Vintage Cars - 1985 AMC Eagle Limited Wagon 3D printable model.
