Counting matching models…
Own a piece of automotive legend with this 3D printable STL model of the 1993 Porsche 911 (964) Turbo. This legendary German sports car model is perfect for automotive enthusiasts and fans of air-cooled Porsches, showcasing iconic design…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
NO MMU NEEDED I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The “real” Volkswagen counterparts to these models have a propensity to spontaneously vanish from the vehicle, due to aging plastics and a harsh, vibration- and wind-heavy environment. I have literally never seen an actively-driven…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The X-Files - Special Agent Fox Mulder - 1993-2002
This model is compatible with the lego system.
Mighty Morphin Power Rangers - Kimberly in Shorts - 1993 3D printable model.
Tombstone - Johnny Ringo - 1993 3D printable model.
Groundhog Day - Bill Murray as Phil Connors - 1993 3D printable model.
Demolition Man - Alfredo Garcia - 1993 3D printable model.
Mighty Morphin Power Rangers - Yellow Ranger Trini - 1993 3D printable model.
Mighty Morphin Power Rangers - Red Ranger Jason - 1993 3D printable model.
Vintage Video Games - Day of the Tentacle - Bernard Bernoulli, Laverne, and Hoagie - 1993 3D printable model.
Mighty Morphin Power Rangers - Pink Ranger Kimberly - 1993 3D printable model.
Die Hard With a Vengeance - Zeus Carver - 1993 3D printable model.
Mighty Morphin Power Rangers - Green Ranger Tommy - 1993 3D printable model
Star Trek Deep Space Nine - Major Kira Nerys - 1993-1999 - 2 VERSIONS
The X-Files - The Cigarette Smoking Man - 1993-2002
Demolition Man - Associate Bob - 1993 3D printable model.
seaQuest DSV - Deep Submergence Vehicle 4600 - 1993-1996 3D printable model.
Mighty Morphin Power Rangers - Blue Ranger Billy - 1993 3D printable model.
The X-Files - Assistant Director Walter Skinner - 1993-2002
Mighty Morphin Power Rangers - Black Ranger Zack - 1993 3D printable model.
The X-Files - Special Agent John Doggett - 1993-2002
The X-Files - The Lone Gunmen - 1993-2002
Groundhog Day - Ned Ryerson - 1993 3D printable model.
The X-Files - Special Agent Monica Reyes - 1993-2002
seaQuest DSV - Nathan Bridger (Roy Scheider) - 1993-1996
This is a 3d printable model of a 1993 Chevrolet Lumina APV. This has to be one of my favorite minivans and honestly one of my favorite cars! Have fun printing this!!
Cheers - Dr. Frasier Winslow Crane - 1982-1993 3D printable model.
Podtácek Sparta ČKD Praha. Tištěno na Prusament PETG vrstvou 0,15 mm quality. V Prusasliceru nastavena výměna filamentu pro “dvojbarevný” tisk. ČKD pod hvězdou je bohužel malé a po výtisku to není úplně ono. Upravene-CKD = výška podtácku…
The Sandlot - Hamilton Ham Porter (Patrick Renna) - 1993 3D printable model.
The X-Files - Alex Krycek - 1993-2002
seaQuest DSV - Commander Jonathan Ford (Don Franklin) - 1993-1996 3D printable model.
Vintage Video Games - Mega Man X - Threezero Mega Man X - 1993 3D printable model.
1993 nissan 300 zx cup holder
The X-Files - Mr. X - 1993-2002
Rx7 1993 (FD3S) Trunk lid cover clip
seaQuest DSV - Lucas Wolenczak (Jonathan Brandis) - 1993-1996 3D printable model.
The Sandlot - Benny The Jet Rodriguez 1993 3D printable model.
The X-Files - Deepthroat - 1993-2002
Rip and Tear... Your Filament! Bring the ultimate demon-slayer to your desk! This 3D printable model is a tribute to the legendary 1993 Doom Guy , capturing the iconic, pixelated badassery of the classic MS-DOS era but brought into the…
Cheers - Dr. Lilith Sternin - 1982-1993 3D printable model.
The Sandlot - Bertram Grover Weeks (Grant Gelt) - 1993 3D printable model.
Iconic Movie Characters - Schindler's List - Oskar Schindler & Amon Goeth - 1993
The Sandlot - Timmy Timmons (Victor DiMattia) - 1993 3D printable model.
The Sandlot - Tommy Repeat Timmons (Shane Obedzinski) - 1993 3D printable model.
Coneheads - Beldar Clorhone Uniform(Dan Akroyd) - 1993 3D printable model.
Coneheads - Beldar Clorhone Sweater (Dan Akroyd) - 1993 3D printable model.
Needful Things - 1993 3D printable model. Prints in two parts. The big scene, and the two small men fighting. Size everything to your needs and print!
Coneheads - Prymatt Clorhone (Jane Curtain) - 1993 3D printable model.
Coneheads - Connie Clorhone Prom (Michelle Burke) - 1993 3D printable model.
Coneheads - Connie Clorhone Shorts (Michelle Burke) - 1993 3D printable model.
seaQuest DSV - Captain Nathan Bridger - 1993-1996
The Sandlot - Michael Squints Palledorous (Chauncey Leopardi) - 1993 3D printable model.
Vintage Video Games - Day of the Tentacle - Purple & Green Tentacles - 1993 3D printable model.
Ein minimalistischer Schlüsselanhänger, inspiriert von der ikonischen Strichzeichnung aus der Werbekampagne zum Verkaufsstart des Renault Twingo C06 im Jahr 1993. Das Modell fängt die unverwechselbare Silhouette und das „Gesicht“ der…
The Sandlot - Scott Scotty Smalls (Tom Guiry) - 1993 3D printable model.
The Sandlot - Alan Yeah-Yeah McClennan (Marty York) - 1993 3D printable model.
Cheers - Woodrow "Woody" Huckleberry Tiberius Boyd - 1982-1993 3D printable model.
Mighty Morhphin Power Rangers - Zordon - 1993 3D printable model.
The Sandlot - Kenny DeNunez (Brandon Quintin Adams) - 1993 3D printable model.
The X-Files - Monster of the Week - Eugene Tooms - 1993-2002
seaQuest DSV - Dr. Kristin Westphalen - 1993-1996
seaQuest DSV - Lucas Wolenczak - 1993-1996
THIS IS A SPROCKET for the engine/odometer for the Ford Mondeo Mk1 1993-1995
Fire in the Sky - Probe Scene - 1993 3D printable model.
Iconic Movie Posters - Tombstone - 1993
Podtácek AC Sparta Praha s logem používaným od roku 1993 - 2021. Tištěno na Prusament PETG vrstvou 0,15 mm quality, což je trochu problém vzhledem ke stringování. Pokud budete tisknout tak při průměru 90 mm doporučuji ověřený materiál,…
A simple sun visor hook for a Opel Combo 1993. it may be compatible with other Opel models Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Resolution: 0.20 Infill: 20 Filament: Amazon Basic PLA or…
Iconic Movie Props - Cronos - Cronos Device - 1993
3D-Printed Replacement Windshield Washer Fluid Cap for 1993-2002 Toyota Corolla & Geo/Chevrolet Prizm Keep your vehicle’s washer fluid system secure with this 3D-printed replacement windshield washer fluid cap , designed to fit all…
seaQuest DSV - Dr. Kristin Westphalen & Lucas Wolenczak - 1993-1996
Iconic Movie Props - Groundhog Day - The Alarm Clock - 1993
A shifter bushing part that I struggled to get my hands on for my 1993 Subaru Liberty (BC7) at a reasonable price. So i got my verniers out and made some quick 3D models. The OEM part number for this model is based off of 35035AA030 and…
Use a high temperature, possibly flexable filament. I used YXPolyer PA6 (no fibers). I suppose you could try a fairly stiff TPU, and could also try ASA/ABS, but I'm not sure how they'd hold up to the heat. See below for support sections.…
This is a modell of the starecase from the boardgame 13 Dead End Drive (1993 version)
More large robot prints are comming up :) …. This one is based on a the comic series “Sonic, the Hedgehog”, released in 1993. Since it has not been designed by me (I am not skilled performing such tasks), full credit goes to the artists…
Automotive plastic clip for 1993 Geo Tracker door, may fit other vehicles. Holds the door handle in place. I've used a few days but lets see if it holds up. I printed PETG with no supports and flat side down. This might be problematic so…
This is a set of clips and holders for a kayak flag they were designed to fit https://www.amazon.com/gp/product/B07GBWT8YL/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 BRILLIANCE4U Replacement Aluminum Tent Poles, Multifunction Tent…
Leave a comment if you want an optimized 3mf! Made this because i lost a few of mine for my car, and the tail lights were making an annoying squeaking noise without them haha print settings: 100% infill no supports PETG, ABS or ASA…
Made for carrying things at the door (like any other car), it goes placed between the door and the handle, tights with the screws (no mods). Printed in black PETG, 20% grid infill, painted with fabric dashboard spray. Fits Toyota Tercel…
Tired of having nowhere to put stuff (cards, coins, etc). Newer cars have a lot of trays. So I designed this one, goes below the hand brake, just plugs in (Shorter grabber or clip goes facing front). Printed in black PETG, 15% cubic…
Could not find these any longer so created them in Fusion and printed them out in TPU98. Seems to be working fine so far, and if they do fail I will just put in some new ones :) I printed them flat so the filament would be pulled in a way…
