Counting matching models…
I wanted to organize our small pile of home networking gear, so I designed this 3d-printed rack. From top to bottom, it holds: Feed-through patch panel with slots for 9 keystone jacks Cisco SG250-08 L3 managed switch GL-iNet GL-MV1000…
Added few more mounting plates: Intel 7th gen NUC, unscrew front screws and pull into the mount, then screw them back to fix. TP-Link managed switch TL-SG108P(E) mount. Additional plate to mount power bricks and wires.
I needed to hang the mini rack off the wall and modified this to accept 4 screws. The holes are 4mm so any reasonable size screw will work. The shelf visible in my pictures is this on from Moshe. Check out my other models for Home…
turntable 19 cm in diameter, with a 608z bearing in the center. I made this little tray to make scanning easier with the Creality Scan Ferret Pro 608zz : https://s.click.aliexpress.com/e/_DBGj5nZ
They should all fit in with friction. The SB8163 gets hot so give it plenty of room and air flow. For the Unifi Lite, use a zip tie. It works ok.
Kleiner süßer Drache mit Aufhängung - Breite ca. 19cm Länge 12cm Auch beim Druck mit nur einer Farbe ergeben sich tolle Farbnuancen aufgrund der geringen Schichtanzahl. PLA / PETG 0,2mm oder 0,1mm
This panel let's you mount the SwitchBot hub to the Blinkinlabs' mini rack .
A nut attachment for an IKEA 19cm bowl to separate nuts from their shells. Printed with PLA Link to Bowl: https://www.ikea.com/de/de/p/ikea-365-schuessel-weiss-00468130/
UCG-Ultra mount for Blinkinlabs's 19cm network rack. Uses four M3 4.6mm diameter heat inserts on the back and a back plate that can be downloaded from the original model by n3rding here:…
A remix of SherlockWatson's Raspberry Pi Rack mount, changed to suit the 19cm Network Rack by Blinkinlabs . Mounts with a couple of 3MM screws, there should be plenty of room for hats on top of the pi though mileage may vary. Feel free to…
Originally printed on BambuLabs A1, 0.4 Nozzle, 15% infill, PLA (Prints fine on 166% speed)
Like the summary says. Powertec rails are considerably wider (19cm) due to the added flexable part near the blade. These are 191mm and they fit like butter. I just used some M5 x 30mm bolts because it's what I had laying around and it was…
This is a 3D printable Bitcoin wall sign , designed to be illuminated with LED strips and mounted on the wall — perfect for crypto lovers and modern decor! Key Features: 19 cm radius – easy to print on most 3D printers Groove fits LED…
Cable Channel clip for 19cm Network Rack. Allows for cleaner routing of cables
a plate to hold 3 ikea HALVTOM 19cm bottles.
This is an Elecrow 5 inch isplay mount for the "19cm network rack" https://www.printables.com/model/108975-19cm-network-rack made using this hook mount : https://www.printables.com/model/85016-desktop-pi3b4b5b-mount-for-hdmi-lcd
使用 M3-M4 螺钉。硬盘盒后面的散热风扇为 12个 20-12 个 25MM。硬盘盒的背板使用自定义的背板大小。电源使用 FLEX 电源（1U 电源）。电源开关的孔径为 16 毫米。第一部作品虽然有缺点，但可以作为参考。 类别： 小工具
Print Guide: no supports! PETG! 0,6 nozzle recommended 0,4 nozzle possible 3 Walllines, 20% Gyroid infill Our filter mount for grow tents allows you to secure your carbon filter safely and space-efficiently. The robust holder is ideal for…
This is an Elecrow 5 inch isplay mount for the "19cm network rack" https://www.printables.com/model/108975-19cm-network-rack made using this hook mount : https://www.printables.com/model/85016-desktop-pi3b4b5b-mount-for-hdmi-lcd
The design is from the IKEA UTSÅDD Pet Bowl. I measured everything as best as I could and modeled it up for another project I'm working on. I haven't tried printing it (nor will I), so I can't confirm it prints well. IKEA UTSÅDD Pet Bowl:…
I use grage/ladder hooks as heavy duty wardrobe rails to hang my motorcycle leathers. They rock from side to side and make a mess of the wall and work the rawlplugs loose. I made some support pieces that stop them from doing this. I think…
Remix of the 10" mount to fit the https://www.printables.com/de/model/108975-19cm-network-rack
Network Switch Pannel for the SODOLA 8-Port Unmanaged 2.5G Switch,8 x 2.5GBASE-T Ports,1X10G SFP+,100Gbps Switching Capacity, Fanless, Metal，Plug & Play 2.5Gb Network Switch . https://www.amazon.com/gp/product/B0CKP5648P/?th=1 Compatible…
Created some additional mounts for the 19cm Rack, following the original dimensions. Except for the Optiplex Mount they all hold themself and have locations for the originally designed wallmount screws. For the screws I used M3…
This is a front plate or a mount for the Home Assistant Yellow for the Blinkinlabs 19cm Mini Server Rack. It uses the two front screws from the bottom of the Yellow. The hole to the right is for the cables if you decided to route them to…
