53 models
Simple modification of Zack Freedman's 1x1 gridfinity bins that adds internal dividers (half-split and quad-split options), deepens the internal volume, and removes the magnet feet holes from the bottom. I think I also used @Akio's…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
This was inspired by Zack Freedman's Gridfinity project. My take on a Micro SD card holder for Gridfinity. I created using Onshape . Added step file for easy changes.
Gridfinity compliant 1x1x3 block with 7.9 mm gap between each card for ease of access. No holes for magnets, my printer isn't dialed in enough to do those holes, so my entire Gridfinity collection is without.
Gridfinity AAA Battery 1x1x3 or 2x1x3 created using Onshape adjusted battery diamenter. Added step files for easy changes.
This was inspired by Zack Freedman's Gridfinity project. My take on a USB-A & USB-C holder for Gridfinity. I created using Onshape . Added step files for easy changes.
This is a remix of idenny1's Gridfinity 1x1x3 micro SD card holder. I've removed half of the microSD card slots to make this a combination bin and micro SD card holder.
This was inspired by Zack Freedman's Gridfinity project. My take on a phone chargers holder for Gridfinity. I created using Onshape. Added step files for easy changes.
SD / MicroSD Card holder Gridfinity tray This holds 10 SD and 10 MicroSD cards in a 1x1x3 Gridfinity tray.
I don't know why but the original model is not stackable with the batteries in it. (The red arrow mark in the photos.) So I enlarged its height to 3U and it's stacking nice. Also added a label area because I like the label.
Gridfinity AA Battery 1x1x3 or 2x1x3 created using Onshape adjusted battery diamenter.
Small Gridfinity 1x1x3 module that holds 2 9V batteries. Based off Jerr_074's design, but I modified it to have the lip at the top and to be a 1x1x3, rather than whatever weird size their's was. They can stack while empty, but not when…
This funnel is optimized to be stackable as 1x1x3 container, so it can be stored within Gridfinity more easily and also allows the usage with no need to hold it. The funnel opens to one bottom side to fill divided bins easily and seals…
The dimensions of Pred's bins are a little different from Zack's and don't quite fit into a baseplate I designed to the gridfinity.xyz specifications. In the process of troubleshooting this.
This 1x1 Gridfinity module is 3u high. It holds four 3g tubes of superglue, two with the lid down and two with the lid up. Opened tubes should be stored lid up so they don't leak. This module is designed without any through-holes, so if a…
Gridfinity ER32 Collet Holder (1x1x3) AKA (42mm x 42mm x 25mm) that can hold one (1) ER32 collet.
The original wasnt stackable but the one i remixed is. I decided to emboss the LR44 on the model itself. I had no need for the holes on the bottom so i took those out but i uploaded a version with them as well. Its a bit tough to get the…
This was inspired by Zack Freedman's Gridfinity project. My take on a Dupont wire holder for Gridfinity. The slots are tapered to hold wires better. I created using Onshape . Added step files for easy changes.
This was inspired by Zack Freedman's Gridfinity project. Kingroon KP3S Tool holder for Gridfinity. Holds allen keys (1.5mm,2,mm2.5mm and 3mm) , wench and tweezerzs I created using Onshape. Added step file for easy changes.
These USB-C adapters are a little bulky, so I think 4 is the perfect number for a 1x1 base. They slot in at 45 degrees because… that's less boring. The slot dims I used were 8.6mm x 2.75mm, which is a slightly higher tolerance than I…
I needed a taller bin to hold pencils/pens. Thanks for the STEP file.
My first contribution to the gridfinity system: A holder for a YubiKey 5 NFC. The security token sits loose but securely in the holder so that it is easy to remove when it needs to be used. The holder is based on a standard 1w 1d 3h bin…
Please Check Out all my other Gridfinity Tool Holders here ! :D ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1x1x3u Gridfinity Universal Holder for ¼ in Socket Wrench * Any/All ¼ Inch Drive Sockets should fit so…
Small module that holds one of those small 5W Apple wall adapters in a 1x1x3 module, instead of Cosfrog's 1x1x6. I felt it being a 6 high module didn't make much sense since the two wall plugs stuck over the top of it, so shortening it…
While I was at designing trays for my batteries, I realized that I wanted non-touching stackable trays for my CR-based batteries. I do not have an extensive need for many CR2450s but I need a few, so a 1x1 by 3u high tray was the deal for…
I remixed the half-bin-half-microsd-holder to add a slope to the bin, making it easier to get your USB out of it. If you plan to put other stuff in the bin, you may find the original model better as it offers more storage room.
For Bamboo Lab attachments from third-party manufacturers. I liked the model (https://www.printables.com/model/542631-bambulab-3rd-party-gridfinity-nozzle-holder/files), but it did not have the ability to put something on top and there…
Small Gridfinity bin for Holding up to two Glue Sticks with a maximum diameter of 21mm.
Here's a simple Gridfinity ER20 Nut&Colletholder i designed
I designed these to fit well inside @unrepentantgeek 's Modern Gridfinity Case . Two sizes are available for each battery type, 3u if you want to stack two together and 6u if you want to use full height in the default case. The inset text…
I didn't find a gridfinity-compatible guitar pick holder that I loved, so I made my own, and I added slots to hold my iFixit spudgers as well. I printed this on the Prusa Mini Input Shaper profile with Jessie PLA, 0.20 SPEED settings.
1x1x3 FreeGrid boxes one version has room for a label and a curved ramp on the front to make it easier to scoop out the contents. Can be printed without supports. The most important thing is to make sure your magnets have the same…
Holds 7 Mini-Superglue (Harbor Freight “Future Glue”) tubes. Tubes are ¾" wide and 2" tall (0.03oz / 1g).
LEGO brick 1x1x3 please enjoy!
This is a gridfinity bin for small bolts, nuts or any small items. I store nozzles for my Neptune 4 in it. It has a scoop ramp for easier removal of small items. It is 3 units tall. It has magnet holes, they are 6x2mm magnets. (Gridfinity…
https://www.amazon.com/dp/B08252DJHN?psc=1&ref=ppx_yo2ov_dt_b_product_details for the above bottles. 38mm diameter hole. STL + Solidworks Below
Corner Radius Gridfinity Bin 1x1x3U This tool can help you find the radius of a corner within 1 - 18 mm. While still fitting in a 1x1x3U gridfinity bin size. You need 1 M3 x 16 screw and nut to hold the bin in place. There are 2…
Gridfinity holder for a stack of guitar picks / plectrums Size: 1x1 units Height: 21mm / 3mm
Disclaimer: This design is an independent creation and is not affiliated with, authorized by, or endorsed by the LEGO Group. It is designed to be compatible with standard building blocks. This brick corresponds to the LEGO 60583a brick…
A Dual Revoltage Beam Pod Holder 1x1x3U for Gridfinity.
Gridfinity battery organiser to fit four MiniDisc player batteries (2x Ni-MH style gumstick, and 2x LIP-4WM used in MZ-NH1 and MZ-RH1). Remixed using the STEP file from the AAA organiser
My missing piece for my London Bus Brick 1x1x3 w. 2 clips, not tested or printed yet.
Gridfinity 1x1x3 2x19mm holes
Gridfinity organiser to fit 3x AD-S31BT batteries for Sharp MiniDisc players
This is a small 1x1x3U Led light ‘Bin’ for the Gridfinity system. It uses a small standard Led as light source. You don't have to use a white Led. Assemble the parts by putting them together on one side and the press them together on a…
Disclaimer: This design is an independent creation and is not affiliated with, authorized by, or endorsed by the LEGO Group. It is designed to be compatible with standard building blocks. This brick corresponds to the LEGO 60583b brick…
Please Check Out all my other Gridfinity Tool Holders here ! :D ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Extra 10mm Socket holder for: 1/4 inch drive 10mm x2 Up to 14mm Diameter 3/8 or 1/2 inch drive 10mm Up to…
Size: 1x1 units Height: 21mm / 3 units
For Bamboo Lab attachments from third-party manufacturers. I liked the model (https://www.printables.com/model/542631-bambulab-3rd-party-gridfinity-nozzle-holder/files), but it did not have the ability to put something on top and there…
The original wasnt stackable but the one i remixed is. I decided to emboss the LR44 on the model itself. I had no need for the holes on the bottom so i took those out but i uploaded a version with them as well. Its a bit tough to get the…
While I was at designing trays for my batteries, I realized that I wanted non-touching stackable trays for my CR-based batteries. I do not have an extensive need for many CR2450s but I need a few, so a 1x1 by 3u high tray was the deal for…
Small Gridfinity bin for Holding up to two Glue Sticks with a maximum diameter of 21mm.
