Counting matching models…
I found the full-size vase mode bins to be too tall and hard to reach the screws so I designed a shorter one including a place to put labels. These work great for things like screws and nuts. There are two magnet holes that are optional…
This was inspired by Zack Freedman's Gridfinity project. I wanted to be able to store some of my frequently used USB devices (USB-A or USB-C). I mashed up a couple different objects together to make this 1x2 bin that will hold 4 different…
These are 2-, 4-, 6-, and 8-stack versions of the HSW 211x248 wall panel. Print at 0.28 layer height with 5+ perimeters to avoid infill. There is a one-layer separation between each panel. Import the STEP file to your slicer, split the…
Trimmed version of Gdschaf border to fit the Honeycomb storage wall 211 x 248 panel, which is about the largest panel you can print on a Bambu Labs printer.
Update (08.12.2023): I reworked these models to meet the correct Gridfinity Specs. I based the first version on this model: https://www.printables.com/de/model/399759-actually-parametric-gridfinity-base-grid-bins , which sadly does not…
This remixed part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting 21x21 mm HGLRC M100-5883 GPS module on a SpeedyBee Mario 5 frame. GPS mount with GoPro v2: better fit and easier…
Gridfinity 1x2 bit holder I used a 0.2mm layer height with a 0.4mm nozzle. Included is the f3d file Included is a height extender (stl + f3d) if you want to stack two units.
It's a simple 7 card holder based on Gridfinity. All the cards are easy to take in/out, which was my main design goal. #gridfinity
A border I created using Xander's OpenSCAD file for my HSW. Hopefully, it might save someone else the trouble of finding the best design. It suits wall-honeycomb-k1-211x201.stl for 220x220 size bed such as my Ender 3 S1. Print as many…
This is a simple, modular drawer organizer for the Ikea Galant file drawer units. This thing is the 1x2 organizer that is 1/2th the width of the drawer. Print 2 of these to fill one row across the drawer - or mix and match with the 1x1…
This is my SD-Card storage solution i designed using this Gridfinity Addin for Fusion360 . It can store up to 13 SD-Cards, and 9 Micro SD-Cards. The bin has little grooves on the inside, so the lid snaps in place and stays on. V11 Update…
Update - 2/20/2026: If you care about the future of 3D printing… Please inform yourself about the legislation which is currently being considered in Washington, California, New York and Colorado, and will restrict and regulate 3D…
I have revised the model of “morenostefanuto” to be 3D-printable. Need to mention that I am not a “Andromeda Fan” or “Trekki” but this Andromeda Ascendant model is really huge and looks really fantastic. The dimensions are: length: ca. 50…
Do you like Gridfinity? Like Storing Stuff? Hate Bland Designs? Try this Scifi-looking Gridfinity 1x2 Storage Box!
Honeycomb Storage Wall 211x201 that you can print in stacks. important to print it with outside up and with ironing enable on all top surfaces. I recommend to print the test file first to see if the print settings is good. After print,…
2025.08.26: Added 1x2 bin divider versions for when you need to store longer objects. 2024.12.13: Added a STEP folder in the file section containing models of each version in case you need to modify one of these for your custom bins.…
Design description I needed a 6x1 bin and couldn't immediately find one. My print-bed is large enough to print it diagonally, so I didn't want to deal with sideless bins and simple created one myself. This has a height of ⅔, stackable…
Simple 1x2 gridfinity block, had two D batteries that needed a home, no holes on bottom, simple / fast print
🧱Lego Duplo Brick 1x2x2 #76371🧱 RICORDATI CHE OGNI PERIODO DI GIORNI PUBBLICHIAMO I NUOVI PROGETTI (ANCHE LEGO) QUINDI ISCRITIVI,👤 SCARICA⬇ E LASCIA UN LIKE👍. REMEMBER THAT EVERY PERIOD OF DAYS WE PUBLISH NEW PROJECTS (ALSO LEGO) THEN…
Gridfinity (1x2 and 1x3) holder for 1/4 inch hex bits. Inclined design to fit into a tool chest drawer. 14/10/2023: 7 and 8 slots versions. 25/10/2023: Adding a 1x3 version with 12 slots. 08/12/2023: Adding a 2x3 version with 12 slots for…
Simple bin for the P1P hotend with heater and fan Gridfinity by Zack Freedman: https://www.youtube.com/watch?v=ra_9zU-mnl8 gridfinity Category: Tool Holders & Boxes
Gridfinity bin for Dremel It has a 1x2 bin footprint. Used for Dremel spanner, chucks and standard 3.15mm (1/8") tools. I really needed a bin with both spanner and tools, and figured I'm not alone. There's no lip on the bin since You…
I remixed Robo's https://www.printables.com/model/309548-gridfinity-bic-lighter-tray Bic Lighter Tray to fit the top of the BIC lighter more snug. Nozzle: 0.4 or 0.6 (tested with both) Layer height: 0.2mm layer height Infill: 10% minimum
I have bought a couple of sonoff zigbee sensor (SONOFF SNZB-02) after some aqara sensor start failing, but differently from the latest they use the CR2450 batteries instead of the more common CR2032 I search printables and thangs for a…
I really liked the design of https://www.printables.com/model/527719-gridfinity-cable-holder, but I wanted a version with a smaller footprint for smaller cables. This is a 1x2 version that provides just that.
This is a 1x2x6U Tool Holder for your Cutters, Long-Nose and a couple pair of Tweezers.
These are the latest version (v 2.0) of my lidded Gridfiniy bins, with several improvements over the 1st version. These include the following improvements and new elements: Fully redesigned bins with a more efficient use of material…
1x2 gridfinity credit/business card holder. Divided into 3 bins, holds cards vertically to optimise space over a 1x3 horizontal bin. I use the sections to divide between credit cards/business card etc.
This module, for 4 Silicone sock for the hotend, works with in conjunction first introduced with the Multi-Modular Storage System -MMSS. It works on the current printers: P1P, P1S and X1C. And in a context, with the specially designed…
This is my first Gridfinity design. After printing the gridfinity 1x2 D battery block by BenBreaksThings I was looking for a similar holder for some C sized batteries. Designed the model in Autodesk Fusion 360, following the sizing from…
Mine printed in PET-G, upper part is bigger but fits with original lego bricks. Because PET-G shrinks...
Grdfinity 1x2 small socket holder (1/4 inch square drive) I tested 4mm to 11mm sockets I used a 0.2mm layer height with a 0.4mm nozzle. Included is the f3d file
1x2 gridfinity bin with side cut outs to grab contents long stored contents
Lid for 1x2 boxes (also works with 2 1x1 boxes)
I was organizing all of my screws, nuts, bolts, etc in the garage with the original wall racks. I had a limited space where I needed 1x2 and 2x2 wall mounts and couldn't find anything. So I hacked these together.
The stuff you need to know: Magnet holes are 6.2mm in diameter STEP file is included for editing Holds two 68mm diameter by 19mm rolls Print Settings: Supports: none Brim: optional Infill: 15% Perimeters: 2 Material: any Check out my…
Gridfinity 1X2X6 filed box modified to hold standard cotton swabs. Part of a set of several items I modified to better organizer my firearms cleaning supplies.
My kids lost their lego. So I drew them a new one in f360. I also included a step. file if anyone wants to correct the tolerances. Print in PETG
The Lore I was looking for any method to keep my tools neat and organized while also preventing them from getting knocked over completely. I also wanted them nearby and ready to go at a moment's notice. I wasn't happy with any designs--I…
Original description Simple Skoda Octavia 1 cupholder for 2 500ml cans. Doporučuji ze spod přilepit pomocí tavné pistole nebo siliconu. My desc Originally, I made this edit for my friend, but many of you asked for it and where you could…
I changed the original f3d file to increase the microSD slots and decrease the regular SD slots. White bin is SUNLU PLA+, lid is Overture Transparent PETG. 0.2/0.4mm layer/nozzle on X1C.
lego 11477 (White Slope 1X2 Curved)
Babe, wake up, they released the 1x2 version. Same as the 1x1 , except it's 1x2. Still holds 10 trays
Sony NP-FZ100 1x2 Gridfinity bin stores 3 Batteries, and stacks when empty.
This model is a gridfinity compatible lid for the original model. The 1x2 version is also available. Since the lids are gridfinity compatible, any gridfinity components can be stacked on them. Print setting No support is needed. A brim…
Hex bit holder, gridfinity 1x2 bin. There are four deeper slots for those longer bits. Print with 10% gyroid/grid infill and no support (slicer might suggest to fix an error in the .stl if so then do that). It fits the Gridfinity…
This is a mini 1x2 version of my 4x4 Gridfinity Box for Stuff (v3.3) 6U and 12U, and is intended for folks who want to test the fit of parts before going all in on a much longer print of the larger boxes. The assembly is the same, but due…
Screwdriver rack for up to 8 Wera micro screwdrivers. Per original maker: When printing the legs, rotate them so the flat part is facing the bed. e.g. 45° on Z axis, 90° on Y axis. No supports are needed. There are no tolerances built…
I needed a Gridfinity 1x2x4 bin with a solid infil to create some specific tool bins, but couldnt find any already made, so made my own. Uploaded here to help you create your own Gridfinity pieces.
Gridfinity 1x2 3u high bin to hold a BT-168D model Battery Tester upright. Printed in PLA. 0.2mm Layer height. 15% Infill
This is a LEGO Flat Tile 1X2 (3 tiles = brick). The tile is similar to the tile 306901, but it does not need to be white.
Holds 3 HDDs/SSDs. There are other models that hold even 4 SSDs, but I had trouble fitting them in and HDDs were not compatible at all. This model can hold two HDDs/SSDs up to 11mm thick and one up to 8mm thick. No special print settings…
Four different versions of a 1x2 gridfinity holder for the awesome razor blade handle and plastic razor blades from @Genghis . Four versions hold either one, two, or three handles. And also, each version holds extra razors of different…
Modulares Ordungssystem für schrauben und Kleinteile in Werkbänken und Werkstätten. Mit laschen zum herausnehmen und beschriften. Material: PLA+ Läyerhöhe 0,2-0,4 mm Wanstärke 1,5 mm (sehr Stabil) Modular organization system for screws…
This is a LEGO Jumper Plate 1X2 (3 plate = brick). The plate is similar to the plate 379401, but it does not need to be white.
Plate 1 x 2 This set of building pieces has been developed through reverse engineering and is compatible with LEGO® building systems. Please note that this project is entirely independent and is not endorsed, sponsored, or affiliated with…
Stackable Insertbox 1x2 units in footprint, full height compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link below this variant is available commercially as injection molded…
Blank 21x21 Compact SeedQR Bitcoin private key, used as a backup for a 12 word seed, with SeedSigner, Krux and Jade Wallet Painted with Staedtler permanent markers https://github.com/SeedSigner/seedsigner/tree/dev/docs/seed_qr designed by…
A simple 1x2x3U Gridfinity Bic lighter bin. this holds the lighter in a flat position. This was designed to be used in a storage box. The bin sits snug around the lighter so it doesn't move to much during transport.
Small 1x2 Bin with holes like a breadboard to hold electronics like an ESP32. The holes are 1.5 mm. I have included a test plate so you can test out if the holes fit for you're electronic product.
This Gridfinity 1x2 Printer Tool Holder holds the tools that come with the Sovol SV06 (except the scraper and allen keys). It has slots/holes for: Flush Cutters Spanners Nozzle cleaning needle Screwdriver Feeler gauges (don't come with…
A simple holder for the Stanley Dual Lock 5m tape measure. Likely to work with other tape measures, but I can't know for sure. Compatible with Zack Freedman's Gridfinity System: ZackFreedman | 3D model uploads | Thangs Print in 2 colors…
model of the missing element lego technic panel smooth 11x2x3
Gridfinity 1x2 bin for holding a sae 1/2" cardan joint and a 3/8" reduction step socket Here's a gridfinity bin size 1x2, where you You can stash a 1/2" cardan joint and a ½" to 3/8 reduction step socket. Used with 1/2" drive ratchet.…
Gridfinity 1x2 sparkplug socket holder bin sae The socket holder uses a gridfinity 1x2 bin. Its made for sae spark plug sockets 13/16 and 5/8. Used with 1/2" drive ratchet. You can hang it on a peg board or wall with the gridfinity 2x5…
Gridfinity (1x2) 7 slots stubby wrenches
Label Collars for the Sortimo 1x2 bins. Press fits into the opening and provides a spot for a 12mm label. Also can be used to color coat the black Sortimo bins to add in organization. Collars are designed to lock into the divider slots.…
I find that I regularly buy packs of USB A to C adapters, then misplace them so that by the time I need one - well, I can't find any so end up buying more, and so the cycle continues. While I was in the process of clearing and…
I really like the model by w33ble but I needed a lower version to fit it into this desk drawer. https://www.printables.com/de/model/717102-under-desk-drawer-gridfinity-no-support
The single can holder is self explanatory. I recommend a 10% infill to reduce filament cost. The double is a little snug without removing the middle wall for support if there is just one can in it. The nice part is you only have to press…
Needed the thing because it was missing when I built my CADA Ferrari. Thought someone could need it :) you can download the .stl to print or the .ipa if you want to remix it in Inventor Print Settings Printer Brand: TEVO Printer:…
This battery holder is designed to hold 8 AA batteries in a 1x2 Gridfinity grid. Others I found held 10 batteries but I found them a bit tight so made my own using the Gridfinity plugin in Fusion 360, and Brian Kerley's Hole Customiser…
This is a LEGO Plate 1X2 (3 plates = 1 brick). The plate is similar to the plate 302301, but it does not need to be white.
A remix of the battery storage tray by BenBreaksThings to hold two D batteries in ZackFreedman 's Gridfinity organization system. Since these can't be stacked with batteries in them, I remixed the original to remove the lip from the top…
This is a building block based off of the dimensions of a Lego block. Should be compatible with Lego, but not guaranteed. Updated version: https://www.printables.com/model/226034-lego-brick-updated - Now a brick instead of plate and has…
Stackable Insertbox 1x2 units in footprint, 1/2 height two of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-19 v2.2 initial public…
Gridfinity holder for Craftsman 16 foot Tape Measure
Create your 1x2x3 Rubik's Cube with this simple and fun 3D printable model. This cube features separate, easy-to-print tiles for customizable colors. Usage Print the cube body and tiles separately ( Note : Since this is a 3D printed…
Remix of @unrepentantgeek's Gridfinity Deep 1x1 Bin. Alternate Sizes (all with 12mm label): 1x2, with a flat bottom as well as a scalloped bottom version for extra storage space. 2x2, with a flat bottom as well as a scalloped bottom…
This Gridfinity 2x1x2 filled Bin template can be used to make your own 2x1x2 models that will support Gridfinity Find all Zack's Gridfinity models here https://thangs.com/designer/ZackFreedman
Tool/socket holder for a cardan-joint, a hex bit adapter and a expansion step tool. The tool/socket holder uses a gridfinity 1x2 bin. It's made for a cardan-joint, 1/4" to 3/8" expansion step and a 1/4" Hex bit holder. Print it with 10%…
This is a 2" (or up to 55mm) wide label holder, which is designed to hold a spool of labels which is up to 60mm in diameter, with a 25mm hole for the tube. The labels I am using are dissolvable labels for food containers such as these ,…
Label Collars for the Bosch/Sortimo 1x2 i-Boxx72 bins. Press fits into the opening and provides a spot for a 12mm label. Also can be used to color code the bins to aid in organization. Collars press fit into place and can be removed.…
This 1x2 Gridfinity module holds a stack of 40 6x2mm magnets inside. Roll the thumbwheel and one magnet at a time is delivered to the top tray, always in the same polarity. You can operate the magnet server with one hand. There are…
Socket holder for 1/4" drive ratchet hex bits in a 1x2 gridfinity bin The socket holder uses a gridfinity 1x2 bin. Its made for hex sockets size 3, 4, 5, 6, 8 and 10 metric. Print it with 10% gyroid infill, no support. You can hang it on…
Lego bracket 1x1, 1x2. It is not 100% accurate, but will fit very good.
A 1x2 Gridfinity drawer. The drawer body is recommended to be printed vertically with a little bit of support. Category: Organization
A simple 21x21 Compact QR for Seedsigner. Dimension Plate: 70x70x6mm Any ideas for improvments are welcome! Printinfo: Used wallgenerator “Arachne”
Inspired by m2tts watch stand , but completely redesigned from scratch to fit seamlessly onto 1x2 Gridfinity squares.
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
This is a 1x2x3 Rubik's cube, it doesn't require assembling, it is print in place and it turns well. Don't use supports.
Stackable Insertbox 1x2 units in footprint, 1/3 height three of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-19 v2.2 initial public…
This is a target stand I made for 1x2 furring strips. It was inspired by this model from CitizenGreyArms: https://www.thingiverse.com/thing:5448274 The only functional differences are my part is more light duty, uses about half the…
This module, for 4 hotends, works with in conjunction first introduced with the Multi-Modular Storage System -MMSS. It works on the current printers: A1 and A1 mini series of nozzles: 0,2mm 0,4mm 0,6mm 0,8mm And in a context, with the…
Additional part for Lego technic
