330 models
This was inspired by Zack Freedman's Gridfinity project. My take on a Micro SD card holder for Gridfinity. I created using Onshape . Added step file for easy changes.
Small desk organizer (1x3 Gridfinity base) to hold pens and related desk paraphernalia: mine holds a pair of scissors, a bunch of pens, nail file, box cutter, and a couple of small picks and screwdriver tools. Reorganizing my desk and…
Gridfinity compliant 1x1x3 block with 7.9 mm gap between each card for ease of access. No holes for magnets, my printer isn't dialed in enough to do those holes, so my entire Gridfinity collection is without.
Gridfinity AAA Battery 1x1x3 or 2x1x3 created using Onshape adjusted battery diamenter. Added step files for easy changes.
This was inspired by Zack Freedman's Gridfinity project. My take on a USB-A & USB-C holder for Gridfinity. I created using Onshape . Added step files for easy changes.
This is a remix of idenny1's Gridfinity 1x1x3 micro SD card holder. I've removed half of the microSD card slots to make this a combination bin and micro SD card holder.
Made in TinkerCAD, no fancy fillets for rounding to accommodate any 9v standard size despite edge rounding. Tested with batteries that were wrapped in plastic and still had space to place without issue, but not too loose.
A 1x3 Gridfinity unit for storing your Flipper Zero.
This gridfinity part is made to store this set of heat-set Insert tips: https://www.amazon.com/dp/B09VL41T7K?psc=1&ref=ppx_yo2ov_dt_b_product_details It comes label with exact sizes for each tip. Feb 27th 2023 Update: I added a v4 version…
Gridfinity (1x2 and 1x3) holder for 1/4 inch hex bits. Inclined design to fit into a tool chest drawer. 14/10/2023: 7 and 8 slots versions. 25/10/2023: Adding a 1x3 version with 12 slots. 08/12/2023: Adding a 2x3 version with 12 slots for…
I liked the ideas for Gridfinity credit card holders that were already posted, but I had a slightly different use case, i.e., a shallower drawer, and felt it could hold more to maximize storage space. I don't use a magnet system, so I…
I found the full-size vase mode bins to be too tall and hard to reach the screws so I designed a shorter one including a place to put labels. This longer one works great for screws or hot glue sticks. There are optional magnet holes with…
I made a 6u height Gridfinity Storage Box by Pred (now parametric) https://www.printables.com/model/543553-gridfinity-storage-box-by-pred-now-parametric/files for all my small electronic components. This jumper wire holder was made using…
This was inspired by Zack Freedman's Gridfinity project. My take on a phone chargers holder for Gridfinity. I created using Onshape. Added step files for easy changes.
SD / MicroSD Card holder Gridfinity tray This holds 10 SD and 10 MicroSD cards in a 1x1x3 Gridfinity tray.
UPDATE 2025/01/19: It seems my model got messed up prior to uploading to Printables. I have uploaded now a fixed model with a battery gap of 3.75mm (on paper, which is the loose fit) and will also recreate the tight fit model (3.45mm…
1x3 Gridfinity Block for storing up to 5 Cards horizontally. Fits inside the short upper Ikea Alex drawers.
Designed to support a stowed LTT Stubby Screwdriver with or without a bit inserted in the shaft.
I couldn't find any Allen keys for Gridfinity that has both SAE and Metric slots so I made this up. Prints fine at 0.2mm. Shout out to Zack Freedman for coming up with Gridfinity. (https://thangs.com/designer/ZackFreedman)
Gridfinity bin for pinecil. Mine is Aliexpress Pine64 version. Fits one TS100 and main unit. Stackable. Created with Fusion gridfinity plugin.
This is simply the weighted Gridfinity baseplate (1x3) with an extension that snap-fits to the vertical extrusion on the power supply side of the Sovol SV06 Plus . It is a tight fit and will take a little effort to snap on. However, I…
I don't know why but the original model is not stackable with the batteries in it. (The red arrow mark in the photos.) So I enlarged its height to 3U and it's stacking nice. Also added a label area because I like the label.
A simple Gridfinity bin for the Milwaukee fastback 6 in 1 (48-22-1505) that fits pretty well. It's a 3x1 configuration. It also includes a blade storage.
Gridfinity bin for Leatherman ARC. Tool is easy to pick up and under the tool there is a handle to pick up the bin. Pictures show a print with color change at the top 5 layers. Also ironing is turned on for smoother top surface.
2 different sized inserts for different vial sizes. I removed the square extrusions in the lid, it prints a tiny bit faster and is easier to fit foam into if you want to do that. See original model for the bottom half of the case, I…
NOTE: This print is designed to be paused at Z = 9.5 mm using an M600 command so that six 60 x 10 x 3 mm bar magnets (~$6 on Amazon ) can be inserted before resuming the print. Gridfinity-compatible screwdriver bits holder - designed…
I wanted a USB holder to live in my desk drawer that mixed high density with ease of access, as well as versatility. This holder can hold 12 USB devices, 12 SD cards, or 28 MicroSD cards. I find its density is low enough that it's still…
Sharpie recommends storing paint pens tip-up. Fits Sharpie, Decocolor, and the pens I got from AliExpress.
Gridfinity AA Battery 1x1x3 or 2x1x3 created using Onshape adjusted battery diamenter.
Small Gridfinity 1x1x3 module that holds 2 9V batteries. Based off Jerr_074's design, but I modified it to have the lip at the top and to be a 1x1x3, rather than whatever weird size their's was. They can stack while empty, but not when…
Gridfinity tray for hex driver bits with corner extensions to allow stacking or a lid. The two files are the same model, but one includes the PLA recycle logo on the bottom. Some of the bits I have in my set are slightly longer than the…
Just wanted a spot for a weatherman wave laying on its side. I made another version which is deeper but haven't printed it out to test it yet.
1x3 Gridfinity holder for a Gameboy Advance SP.
This funnel is optimized to be stackable as 1x1x3 container, so it can be stored within Gridfinity more easily and also allows the usage with no need to hold it. The funnel opens to one bottom side to fill divided bins easily and seals…
The dimensions of Pred's bins are a little different from Zack's and don't quite fit into a baseplate I designed to the gridfinity.xyz specifications. In the process of troubleshooting this.
LEGO Technic Compatible Special Liftarm 1x11x3
This 1x1 Gridfinity module is 3u high. It holds four 3g tubes of superglue, two with the lid down and two with the lid up. Opened tubes should be stored lid up so they don't leak. This module is designed without any through-holes, so if a…
No supports required STEP file included to adjust magnet hole sizes or nozzle labels
This is a customized version of the assortment system box from Alexandre Chappel. It has space for 21 containers to store resistors. The original resistor storage drawers can be found at https://www.thingiverse.com/thing:3889132 Watch his…
Organize your memory cards. Made it low profile to fit through my top drawer
Gridfinity bin designed to hold 11 CR2032 batteries. Bin size is 1x3x4.
It's just a Gridfinity holder for a cheap (but great) plastic razor scraper. Angled scrapper recess to hide blade and expose handle, storage for as many blades as possible, and a lip to allow stacking when not in use.
Modulares Ordungssystem für schrauben und Kleinteile in Werkbänken und Werkstätten. Mit laschen zum herausnehmen und beschriften. Material: PLA+ Läyerhöhe 0,2-0,4 mm Wanstärke 1,5 mm (sehr Stabil) Modular organization system for screws…
Drop your Benchmade Bugout into a gridifnity slot.
Gridfinity ER32 Collet Holder (1x1x3) AKA (42mm x 42mm x 25mm) that can hold one (1) ER32 collet.
This is a perfect place to plop your Opinel no. 8 with the blade facing up for the ultimate tactical, package opening, or apple slicing advantage. I don't know what you do with your knife. Inspiration and attribution: Gridfinity storage…
This was inspired by Zack Freedman's Gridfinity project. My take on a Dupont wire holder for Gridfinity. The slots are tapered to hold wires better. I created using Onshape . Added step files for easy changes.
It's a snug fit so I made it so that you just need to press down on the top for the bottom to pop up enough to grab it.
The original wasnt stackable but the one i remixed is. I decided to emboss the LR44 on the model itself. I had no need for the holes on the bottom so i took those out but i uploaded a version with them as well. Its a bit tough to get the…
When empty, another 1x1 or 2x1 Gridfinity entity can be stacked on top.
I wanted a 1x3x4 unit that could store vertically the maximum of batteries. Without magnet holes Without stackable lips (as it is not stackable) Battery holes are 19mm wide (I wanted it to fit with any battery wraps). I printed mine with…
A thing to hold the SATA 32-piece feeler gauge set (ST09407SJ). Here's a link to the tool: https://www.satatools.us/products/automotive-specialty/feeler-gauge-sets/st09407sj-32-pc-feeler-gauge-set-002-100mm
This gridfinity bin holds the Leatherman bit kit. A maximum of 2 bit sheets can fit and it will still be stackable.
Note: Hasnt yet been printed to confirm fit. Standard print settings apply, its a pretty simple model. It is suitable for this type of plastic razor blade or ones like it:…
Gridfinity 3x1x3u bin with dividers for 5x 100mm (~4") bits with press fit magnet holes (PFM) This design fits 5x 100mm bits, is stackable, and has press fit magnets (PFM) It is recommended the outside corner magnet holes be used to limit…
Stackable Insertbox 1x3 units in footprint, full height compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link below this variant is available commercially as injection molded…
No magnets. Stores a 50ml bottle. There was a little space left over, so I made a little rectangular storage area. No supports 15% Infill PLA Fits my bottle like a glove.
This is a LEGO Plate 1X3 (3 plates = 1 brick). The plate is similar to the plate 362301, but it does not need to be white.
This was inspired by Zack Freedman's Gridfinity project. Kingroon KP3S Tool holder for Gridfinity. Holds allen keys (1.5mm,2,mm2.5mm and 3mm) , wench and tweezerzs I created using Onshape. Added step file for easy changes.
The bin was created with GridfinityGenerator ( https://apps.autodesk.com/FUSION/en/Detail/Index?id=7197558650811789&os=Win64&appLang=en ) and then adapted to fit the adhesive stick.
Additional part for Lego technic
I made this from wood filled pla generic normal settings for my M5C with 10% infill and it turned out pretty nice. Fit is loose as I have some very old handmade track that has a wide range tolerances. There are two versions a 1 inlet 3…
These USB-C adapters are a little bulky, so I think 4 is the perfect number for a 1x1 base. They slot in at 45 degrees because… that's less boring. The slot dims I used were 8.6mm x 2.75mm, which is a slightly higher tolerance than I…
This model lets you store a AXA lathe toolholder in a 1x3x4U GridFinity box. The toolholder is modeled after a Shars 250-101, so I can't guarantee that other brands fit as well. There is just enough room for your average indexable tool.…
Lagerdummy für Vespa PX80-200 Lima 25,1x37,9x15 Damit kann die Kurbelwelle probeweise und ohne Kraftaufwand im Motorgehäuse montiert werden. Hiermit ist ein Messen für z.B. Steuerzeiten möglich.
Gridfinity tray for your HOTO screwdriver
Fits Niimbot D110 Label Printer, Press Fit 6x2mm magnets
Stackable Insertbox 1x3 units in footprint, 1/2 height two of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-20 v2.2 initial public…
Gridfinity 1x3x3 Olight i3T EOS Laying down orientation for low drawers.
A simple cut and merge of the original 2x2x6 Wallet Cards holder to fit a 1x3x6 space.
1x3 Gridfinity storage for 2 JB Weld 4oz bottles, 2 1oz tubes, 2 types to stirrers, and an epoxy dish. I recommend using masking tape to cover the dish so you dont have to keep reprinting them. Pictured are the stackable mixers found here…
My first contribution to the gridfinity system: A holder for a YubiKey 5 NFC. The security token sits loose but securely in the holder so that it is easy to remove when it needs to be used. The holder is based on a standard 1w 1d 3h bin…
This is a 1x3 Gridfinity holder for all the parts of the AnkerMake M5 tool kit that is included with the printer. It also includes a 1/4in socket holder incase you have larger nozzles ie a Volcano style nozzle.
Stackable Insertbox 1x3 units in footprint, 1/3 height three of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-20 v2.2 initial public…
This is just one box of a bigger system with more than 160 variants in size and partition. Find the whole overview here. Stackable: three thirds/two halves make one full height All dimensions shown in the linked overview above compatible…
Gridfinity 2x1x3u bin with dividers for 5x 65mm (~2.5") bits with press fit magnet holes (PFM) This design fits 5x 65mm bits, is stackable, and has press fit magnets (PFM) It is recommended the outside corner magnet holes be used to limit…
Container for the Gridfinity system for two Anker 521 (PowerCore 5K) Can be printed without support Good results even with 0.3 mm layer height (Prusa i3 MK3S+) Fits the flat Ikea Alex drawers Not stackable Credits: Many thanks to Zack…
I was annoyed that I had to buy this when it wasn't provided with my newly delivered washer. Now you don't have to.
Please Check Out all my other Gridfinity Tool Holders here ! :D ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1x1x3u Gridfinity Universal Holder for ¼ in Socket Wrench * Any/All ¼ Inch Drive Sockets should fit so…
Gridfinity Redefined (The gridfinity redefined style with the thumbscrew attachment) 1unit x 3unit x 6units - With label, divided sections. Printed 0.3mm layers, 15% infill, no supports needed.
5x1x3 Gridfinity bitholder for unlabled mass short hex bit storage
Once all my other batteries where sorted, what to do with the clunky 9v blocks? and on top, for my few remotes, i do need some spare AAA batteries stored. Lets use the free space of a 4x 9v Block Gridfinity box and store some additional…
Stackable Insertbox 1x3 units in footprint, 1/2 height, 1x3 grid two of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-20 v2.2…
Gridfinity clipper +rolling paper display holder
A remixed stand for the Spotify Car Thing with a Gridfinity compatible base. Grid size: 1x3 Stand is available without the Gridfinity base here . Original stand created by caw232000 Gridfinity system created by ZackFreedman
Stackable Insertbox 1x3 units in footprint, 1/2 height, 1x4 grid two of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-20 v2.2…
Stackable Insertbox 1x2 units in footprint, 1/2 height, 1x3 grid two of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-19 v2.2…
Stackable Insertbox 1x3 units in footprint, 1/2 height, 1x2 grid two of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-20 v2.2…
Stackable Insertbox 1x2 units in footprint, 1/3 height, 1x3 grid three of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-19 v2.2…
Stackable Insertbox 1x3 units in footprint, 1/3 height, 1x3 grid three of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-20 v2.2…
While I was at designing trays for my batteries, I realized that I wanted non-touching stackable trays for my CR-based batteries. I do not have an extensive need for many CR2450s but I need a few, so a 1x1 by 3u high tray was the deal for…
Stackable Insertbox 1x3 units in footprint, 1/3 height, 1x4 grid three of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-20 v2.2…
Gridfinity bin for Olight warrior mini 2 flashlight. Placed with the clip down. This gridfinity bin is ment to be at the top layer, so it is not stackable. I printed this with a color change at the top 5 layers. Also ironing is applied to…
Much thanks to Glueshop and totocaster for their amazing models. This model holds the manual precision screwdriver and 4mm bit set which can be found by searching Amazon for B0CCRRJTVM. There are two extra bit holes. The magnet holes in…
Stackable Insertbox 2x3 units in footprint, full height, 1x3 grid compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link below Changelog 2022-06-24 v2.3 initial public release…
I remixed the half-bin-half-microsd-holder to add a slope to the bin, making it easier to get your USB out of it. If you plan to put other stuff in the bin, you may find the original model better as it offers more storage room.
Remix of the 6x3 part, split in two 1x3 parts, added magnet cutouts and modified it to allow printing while stored.
Stabilo holder Horizontal-flat Gridfinity 1x3x3
Stackable Insertbox 1x3 units in footprint, 1/3 height, 2x2 grid three of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-20 v2.2…
A Gridfinity tray for 50 mL Waterman Fountain Pen Ink Bottles
![Gridfinity 1x3 LTT Screwdriver Bits (x48) Holder [Magnetic]](https://media.printables.com/media/prints/478190/images/3910851_8e6f6782-f0e1-42db-b010-4c00d0a7d443/20230510_170923.jpg)
