Counting matching models…
Prop model of the famous Vietnam War era 20 round AR15/M16 magazine, this is a prop and it's in no way a functioning piece of firearm. The model is not scaled to size but the proportions are right, you just need to dial in the correct…
Simple stand to fit in the slot on the digital piano. Step file is included for modification to fit your specific piano as necessary. Supports are required for the insert tab that goes into the piano as it hangs in free air.
I wanted a small, sturdy package to take along a few rounds to the range, so I came up with this minimalist design. The case rests on its shoulder, so the bullet of a standard FMJ round has no contact with the box. The lid has a few ribs…
The first layer is 0.15 The remaining layers are 0.08 Width 0.4 3 perimeters Filling in 100%
Case side and gear modified to work with Greartisan DC 12V 120RPM Geared Motor JSX69-370 6mm shaft Used m3x8 scews for motor mount The part that holds the tape made 26.2mm for 3m super 33+ tape. https://www.amazon.com/dp/B071XG53B4 Still…
The impeller of our leaf blower/vacuum broke after ingesting a few too many sticks. With replacement parts no longer available, I attempted to recreate it by first modelling a slice of the part which I used to test the clip in blade…
Montaż do tylnych głośników HT-S20R od Sony. --------------------------------------------------------------- Mounting to the HT-S20R rear speakers from Sony.
Lockable ammo box for 20 rds. of 6.5x55
Lockable ammo box for 20 rds. of .303 brit
Lockable ammo box for 20 rds. of 8x57
Mounting Bracket for a Nilight 50020R connector found here: https://www.amazon.com/Nilight-Waterproof-Terminal-Connector- Step and .3mf files supplied for you to edit your preferred mounting clip. I designed my mount into a part i was…
Lockable ammo box for 20 rds. of 7.5x55
This allow you to clear the MAC DS9 Comp without shaving any parts.
Spacer to improve the ergonomics of the FrSky X20R and X20RS transmitters. This is an adaptation of the one I made for the X20s to fit the newer style radios. I found that the position of the radio was uncomfortable and it was…
This printable is currently only a 3D project. Use New version .STL !! .stp & Ligh only older version 😊 I'll rework this project in a little more detail this summer with additions for different Oneblades (which will allow for a smaller…
Body for Pavo20 to house 38x38 modules. Tested with Anjoy ssc338q and ssc30kq
Inkbird ITH-20R thermo/hygrometer outdoor case The external senders don't seem to be made for outdoor use. I witnessed many other units of many brands fail after two or three years outside even in the moderate seasons of western Germany…
Cups for organizer with place for label, here is onshape cad model if you want to edit: Insterst_cups | full (onshape.com) If you want to print full set, just print all files (there are multiple copies of same files, for convenient)
Replacement for Oset kids trials bike front plate. No rim to allow for embossing name. Slightly smaller than stock top to bottom to allow printing on normal build plate. Fits 20R but may also fit other models.
I couldn't find a wall mount for this type of KVM Extender, so I drew one myself. I replaced the three original screws on the top with M3x8 screws. This allows for easy wall mounting of the KVM Extender, and all the ports can be accessed.…
Specific cover for the Fujikura FID-20R device
A set of replacement fences for a Festool KS120RE (also fits REB). These aren't exact duplicates of the OEM one, and don't have a locking lever, but they friction fit quite well. I printed in Silver ABS - I do not recommend using PLA for…
I used 100% fill. Print from: PETG Support: Yes, I added more support manually. You can see on the picture. Printed rotated about 40-45 degrees, you can see on the picture
Designed for mounting on multiboard. This holder will accept up to three magazines. It was built for 350 legend in a AR platform. It will also accept shorter 20 round AR-15 magazines (Straight not Curved). The prints are a better way to…
For my shop, I have a database that is fed from several SP-2000-20R temperature humidity sensors. Double sided tape (not even the 3M Mounts) doesn't stick to 24 year old T1-11 paneling with three coats of poly. So I made this quick and…
This model performs its functions perfectly. It fits more snugly in the mounting hole, but still moves freely. I recommend lubricating it with any keyboard lubricant. I used SW 92SA. I did this for the B820R, but it will probably also…
Designed this around an ELEGRP NEMA L14-20R Flush Mounting Locking Receptacle, Twist Lock Socket/Outlet that I purchased from amazon. The standard single receptacle 1-gang cover I purchased was too small for this outlet, so I just made…
Montaż do tylnych głośników HT-S20R od Sony. --------------------------------------------------------------- Mounting to the HT-S20R rear speakers from Sony.
