Counting matching models…
25A MOSFET bed board module DIN rail mount Mounting 25A MOSFET board on a DIN rail. Compatibility: 35mm DIN rail 25A MOSFET bed board module Mounting components: M3 hex nuts UNC 6-32 to M3 stand + screw UNC 6-32 Thanks to ADEBOTT…
https://www.aliexpress.com/item/1005005986842547.html
simple box for aliexpress module QC4.0 QC3.0 Type-C USB PD65W standard bare wire version
This model is compatible with the lego system.
For when a trip the the hardware store isn't convenient! Consider printing M4, M3.5 and M3 washers with 0.1mm layer height. All other models can be printed at 0.2mm layer height. Edit (08/25/2024): corrected M20 STL and FreeCAD model.
LiFePO4 contact protection https://www.mivvyenergy.cz/cs/clanky-lifepo4/136-166-clanek-lifepo4-120ah-32v-higee.html
The Zetor 25A, a classic tractor made to be printed in almost any scale with your own 3D-printer! Only requires one to print the parts with supports (recommended to print in multiple prints, not forced though), glue the “frontaxelmount”…
The food processor does NOT work if the bottom of this piece is broken off, and mine keeps breaking off. So I modeled this up so that I could replace the original part. Works good enough in mine. Edit: Updated as the original bent into an…
The US-025A is an ultrasonic sensor like the SR04, yet it can work at 3.3V, so suitable for ESP32 & ESP8266. This design includes the sensor (to allow the holes in the carrier), and a carrier for the US-025A, with also suitable to connect…
Replacement cap for the brake/clutch system on the 4G Mitsubishi Eclipse 06-12. Mitsubishi OEM Part number is 4625A161. Apparently this will fit the Galant of the same generation. May also fit other brands/models so it may work for you…
I like building lifepo4 batteries; one of the easier to find types of cells I've used are these 25Ah lifepo4 cells that I picked up from batteryhookup.com (they have had them from time to time). These brackets do a few things: Provide…
This is my design for a modular cell pack using Topband 25Ah LiFePO4 cells. You will need: Various lengths of 6mm threaded bar 6mm ID 10mm OD washers Serrated flange nuts 4x Pieces of metal with drilled holes that conform to the "Link…
A simple mount to hang a Nikon MH-25a charger on a wall while still allowing it to be plugged in & used. Printed without supports at a 0.2mm layer hight on a Ender 3 pro.
Gopro mount for sofirn IF25A flashlight. Fits tightly around the flashlight. Can be used with upto 20mm wide velcro strap. Printable without supports
Dieser einfach Adapter dient dazu, die Hörgeräte Batterie 675 in alten Kameras stabil und sicher einzusetzen. Getestet habe ich den Adapter in mehreren Olympus und Canon Kameras, die Ursprünglich für Quecksilberbatterien gedacht waren.…
I picked up a used Uniden BC125AT and the antenna was pulling it over so I made a desk stand for it.
Just a quick and simple mosfet mount, none of the ones I tried were the right size so here is mine. Category: 3D Printer Accessories
So it turned out my washing machine has poor parts used as motor shaft and some users had to replace complete motor assembly to fix indesit F15 issue. It could be because of wear on motor shaft bushing that leads to rotor grinding stator…
After my frustrations with the original Motorola/Peter Jones Stud for Motorola Radios (PMLN8025A), I decided to design my own Klick Fast compatible stud that is both cheaper and less easy to damage. I've only verified it with my MotoTRBO…
Wagos passen auch noch rein - 2.5mm² ist natürlich Pflicht
We have a modded Universal Laser ULS25A at Stockholm Makerspace (running a Ruida controller and Lightburn as control software), and we wanted to be able to install air assist and use standard 18mm focus lenses. We got them machined for…
Handlebar mount for Sofirn IF25A flashlight Necessary parts: M5 bolt - DIN912 (length: 12-16mm for Ø22.2 version | 14-18mm for Ø31.8 version) M5 hex nut - DIN934 or M5 square nut - DIN557 (files available in 2 versions) velcro strap or…
Aluminum Extrusion Mount for Inateck HB2025AL USB 3.2 Hub I use it to mount the USB Hub on my sim rig's aluminum extrusion (8020). Category: Electronics
When I built my first (and only so far) Voron Trident, I went the cheap way and decided to use MK2a 300x300 24V heated bed and I didn't want to run all the current just via the Octopus board. I designed this little bracket to hold…
This is a 3d printed case that I designed for use with an external Mosfet for the heatbed on my CR-6 Max. Somehow, the mainboard mosfet hasn't given out on my CR-6 Max, but while I'm doing a bunch of other upgrades to it, I decided to add…
Simple desk stand for your BC125AT scanner
My first print is of the Husqvarna Lawnmower Drivegear HU625AWD in PETG with 2 walls and 100% infill with alternating extra wall. It seems very durable and the wheel engages and spins with no issues. We will see how long it lasts.
Remixed for ND filters room that you can slide on the gopto lens from the front. I use Remixed for ND filters room that you can slide on the gopto lens from the front. I use Telesin ND FiltersTelesin ND Filters I wanted to be able to put…
DollaTek 25a MOSFET DIN Rail Mount (LOW PROFILE!!) Much in the same way as my Micro4 board, I needed a compact, low profile, mount for my MOSFET (yes, this Voron uses a 24v bed, yes it heats up quickly, yes it has a good bed mesh). Due to…
Our cats kept turning on or off the AC while walking over the unit. Couldn't find a setting to disable the button but with this cover they can't access it anymore - problem solved. I used two Tesa powerstrips to attach the plate on the AC…
The safety latch on the lid of my Hamilton Beach 12 cup 70725a model food processor broke. I designed and printed a new one out of PETG (given the heat from the dishwasher it seemed appropriate vs. PLA). Make sure you dry fit everything…
Original wheels of my vacuum fell off so I tried to find a 3D printed alternative with no luck. After few variations I came up with pretty good alternative. Sits tight and probably will fit other models as well. Dimensions: Outer wheel:…
Gridfinity Nikon MH25a charger holder 2.25x5 for five charger
DollaTek 25a MOSFET DIN Rail Mount (LOW PROFILE!!) Much in the same way as my Micro4 board, I needed a compact, low profile, mount for my MOSFET (yes, this Voron uses a 24v bed, yes it heats up quickly, yes it has a good bed mesh). Due to…
While rebuilding the turbine section of the blower it was too easy to tip over standing on the end. I made this piece to give it the support it needed for me to work on it. This support piece can be easily added and removed. Can be used…
Holder for 25A Mosfet. Uses M5 bolts to attach printed holder to 2020 extrusions and M3 heat set inserts to attach the mosfet board to the printed holder. I printed mine out of ASA at 101% scale for plastic shrinkage. I used M3 heat sets…
Gridfinity Nikon MH25a charger holder 2.25x5 for five charger
Carb Throttle Adapter for Echo RY25AXB Blower by RebelTaz All of the aftermarket carburetors on Amazon that claim to fit the Echo RY25AXB, don't To be more specific, the carburetor itself fits and works great. The throttle cable won't…
If you have a Kings DC charger that you want to sit in a cradle to mount somewhere like beside a fridge in your car, then this cradle will do the job. Its a great charger. I wanted to test it out before mounting it permanently, but find…
COVER HANDLE DG63-00025A Samsung, oven handle cover Кронштейн ручки двери для духовки SАMSUNG DG63-00025A
