Counting matching models…
Bei einer Freundin hatte ich einen Solarbrunnen im Garten entdeckt. Fand ich ganz nett und hab ihn mit Modifikationen konstruiert und mit einer solarbetriebenen Pumpe versehen. Ich habe diese genommen:…
Hopper Covered 2970 Cubic Foot - Dragon Railway 1/64 Scale Assembly Manual: Google docs You will also need: Freight Bogie 1800 920 Auto Coupler V2 Check out the Dragon Railway ecosystem! Join our Discord If you are happy, Buymeacoffee!!…
I printed the detailed version with a 0.4mm nozzle and lost the second k in slicer. 0.2mm is recomended if you want full detail. See screenshots of slicer Printed on a bambulab x1 with bambulab cf-pla.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model still requires using slicer shrink compensation for abs.
If your clutch has become unusable, print this one. The old clutch is simply tightened with pliers, the new one is pressed with blows of a rubber hammer. Printed from PLA in layers of 0.16. Infill 100%.
I couldn't find an existing HVAC vent redirect which was sized for my vent and could also fit on my printer. This model is sized to fit my vent and fit diagonally on a 256mm bed. Printed with no brim and hybrid tree supports in a tough…
A sign that says “Frog Lover Ave”. Intended for the text to be printed in a different color. If you use a 0.24 mm first layer height and then a 0.28 mm layer height for the other layers the color swap is right before layer 15 starts. This…
I wasn't satisfied with the original tray since the holes were too tight and the spacing was inefficient. So I designed this insert that crams as many rounds into the original case as possible (297x) and makes it easier to get them in and…
I needed a base for a slightly crooked pot with an OD of 295-297mm. This full version is printed in one piece and requires at least a 305x305mm buildplate.
This is a replica of the classic figure D from the Heritage Miniatures Dungeon Dwellers blister pack number 1297, "Dwarves". (see…
This is a replica of the classic figure C from the Heritage Miniatures Dungeon Dwellers blister pack number 1297, "Dwarves". (see…
I created these simple adapters because I needed LR44 batteries for thermometers and at home I only had LR927 batteries available, so I recreated the shape of the former by interlocking the latter. Very simple but functional (both are…
I had the problem that the popfilter of my DT297 is easily falling off. A zip tie was my first fix for that issue but was not optimal. The attached files are: OpenSCAD rendering script to adjust the size Rendered STL file for a working…
Print one of each and 4x Legs (no supports). Assemble the TDA7297 by fixing the knob bolt to the Base. You can use some super glue if you want it to be more stable, but not necessary. The sound is great, I recommend using traslucent…
Insert the 1B 2B 3B 4B plugs upwards from the bottom and the 1T 2T 3T 4T downwards from the top. Helps to ensure the plugs go back into their original location every time while giving you a good look at all eight electrodes for mixture…
Gridfinity holder for Mitutoyo 2971 dial test indicators.
ORGANIZZATORE GT297 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
Printed in 0.05 layer height with a 0.25 diameter nozzle.
LDRC 1297 front electronics shelf
This remix adjusts the original model to more closely match the broken factory part from my Jura A7. Changes: Reduced the main plate thickness from 3 mm to 2 mm. Made the central protrusion hollow, with a rear opening measuring 9 × 18.5…
Extend the axles for wider wheelbase. Holes to use screws to bind to axels on sides. Print horizontal for strength.
Made this clips for a KL Army Box 8115-17-104-6297 with broken latches. This will ensure the box is closed, but the hinge functionality is lost. For a more permanent (outdoors) use. Printed in PETG. Category: Other
LDRC 1297 Top Battery Cover. Part was missing in kit, so I designed this.
LDRC 1297 Top Battery Cover - large.
This is a 3D-printable replacement for the rubber-style bottom feet used on the classic aluminum MacBook and MacBook Pro Unibody models. I designed the part using a 2011 13-inch MacBook Pro A1278 as the reference and tried to reproduce…
Save $16+ and print it yourself Any plastic is good, I used PLA but PETG is probobly a better choice IMPORTANT! Print on its side as in the photo, this is extremely important for load transfer.
1-Chloro-4-iodobutane (C4H8ClI, CAS 10297-05-9) — a free educational 3D molecular model for teachers and students, by MolGod.org. Every atom carries its engraved element symbol, so no colour key is needed. Teachers who print molecules…
This model still requires using slicer shrink compensation for abs.
The one I provided is for the DRIVER DOOR. You will need to mirror it to get one for the passeneger door. This is printed in the standing oprentation with the long flat side down this allows for the locking tab to have the strongest…
