Counting matching models…
Converts drive by wire to full manual drive by cable. The cover needs 2x 4x8x6 knurled threaded inserts to be installed from the back side to attach the TPS Design process: Install:
Full model kit: https://cults3d.com/de/modell-3d/game/2jz-gte-menzenbach The 2JZ engine. Beloved by tuning-enthusiasts and 12-year old fanboys. This is a full scale recreation of the 2JZ engine block. Days were spend scavenging the…
2JZ Cam, Crank and Rear Main Seal Installers
Use this to lock the cams in place for torquing or timing belt installation, keeping them from moving.
I made this to help install the crankshaft front main seal on a 2JZ. It is designed so that it pushes until it is flush with the oil pump body edge.
Created a tool to walk in the RMS on a 2JZ on an engine stand. There isn't much room to fit the Toyota SST to tap it in while the engine is on a stand. This tool makes it possible to slowly walk it in as you tighten the flywheel bolts. I…
A printable replacement connector head for a Toyota Vacuum Switching Valve (Part No. 90910-12114) as found on a 2JZ GTE (i.e. JZA80 Supra) engine. Printed using an Elegoo Jupiter printer using Siraya Clear Blu (Tough) resin.
This is a stand for the 2JZ-GTE model. Full model is available on cults: https://cults3d.com/en/3d-model/game/2jz-gte-menzenbach
Print TPU. I used Gyoroid for a more flexible part, but it was not needed. I can't guarantee what will happen long term with temps, but it won't fall into the bell housing; the lip is too big. In the worst case, it falls on the road one…
This is a crankshaft for the 2jz engine but without the exact dimensions as in the real engine.
Iconic engine head gasket keychain -Toyota 2JZ-GTE Print settings: Layer height 0.2mm, 100% infill, nozzle 0.4, ironing on Dimensions: 80mm length, 3mm thickness
Designed these to keep dust and debris out of my engine while I work on it over several weeks. These are vented at a downward angle to prevent anything from falling in, but when rotating the engine, the compression can escape, making it…
Keeps the 2jz shim buckets from falling out
Iconic engine head gasket keychain -Toyota 2JZ-GTE Print settings: Layer height 0.2mm, 100% infill, nozzle 0.4, ironing on Dimensions: 80mm length, 3mm thickness
Use this to lock the cams in place for torquing or timing belt installation, keeping them from moving.
