Counting matching models…
Description: I liked the magnetic rack design by RyanMulqueen for 0.2mL PCR strip which can be used in high or low position, so I reproduced the design with minor changes to fit my needs. Main modifications: Small reduction of the hole…
Why did I make this? > I made this to hold my medication vials which I often have many on hand of due to being a chronic migraine sufferer and Dysautonomia patient. I wanted to not only solve a personal issue but democratize an issue for…
This screw hole for this lid fits threads with an outer diameter of 8.5mm (1/3"). The cap is 12-sided, for use with a variety of wrenches should it get stuck. I made the top flat for easy printing, so it doesn't require supports. Shown…
Cover for a Softsoap liquid hand soap dispenser. Slide into the sleeve (snug fit) and unscrew dispenser top and put through the top and screw the dispenser top back on.
Designed in Tinkercad for the Habit 2ml disposable vape. Simple pocket holds the device upright on a desk or nightstand. Four STL versions included: Sauce and Exotics in both original blocky and slim base styles. Sauce and Exotics…
Einen einfachen Ständer für meine Marabu-Acryl-12-ml-Tuben mit einem Sichtfenster, um die Farbcodes sehen zu können.
A simple adapter for 0.2ml tubes to fit in a 1.5ml microcentrifuge slot. Try and ensure your print comes out to approx 1.57g. I printed mine in ABS but that is likely overkill. PLA should do just fine.
A simple but essential tool for scale modelers. The standard 12ml Zvezda glue bottle is notoriously unstable. This holder features a wide, weighted base to prevent accidental spills that could ruin your model or workspace. Compatibility:…
This is a single and a double layered shelf for the 12ml ink bottles received in the Diamine Inkvent Calender
This is adapter for a Hyundai Tucson Rear Seat cup holder to suit Yeti 18oz/532mL Rambler.
I needed a tray to hold my 12 and 21ml acrylic paints. They have the same size cap just a larger tube so 2 rows have a slightly larger space between them. One model is leaning backward for top mounting on hsw, another is forward leaning…
Paintrack/Paintholder for 25 - 60ml airbrush paint bottles. To save printtime i printed mine with a 0.6mm nozzle and 0.4mm layerheight. Infill 15% and used “Combine infill every 2 layers” For 17ml bottles see:…
Gridfinity organizer for Liquitex 22ml paint tubes from the starter kits
A simple 2x2 Gridfinity storage solution for a 312 mL can of WD-40. The can cut-out has a diameter of 67 mm with a cut depth of 20 mm should you want to use this for other cans. Printed with no supports in PLA on my Bambu P1P. (Apologies…
These are two paint cups perfect for using with painting scalemodels, one ≈1ml and the other ≈2ml. Each cup features a wide lip on the bottom to help prevent spills caused by accidental bumps or tipping over with a paintbrush. It is…
The stock tube trays from Thermo only hold Thermo MS vials which are far too small for sample fractionation. Hence we designed a tray holding 2 mL tubes and printed it. Note that you need to mount the appropriate data matrix codes (these…
English This 3D printed holder is made for your WD-40 can (382ml/11oz) and fits right into the Honeycomb Storage Wall system. It’s super easy to print and put together, keeping your can safely in place. Español Este soporte impreso en 3D…
Stores 8 tubes of 12ml paint cap-down. Fits tubes whose cap measures a taper of 11mm to 12mm, such as those frequently sold by Action. The bin is 2 units wide, 1 unit deep, and 3 units tall. No supports needed for printing; I printed mine…
I needed a stand for gorilla wood glue bottle (the 18Oz / 532ml variety) but couldn’t find something that suited me, however, CYMA remix looked promising but after I printed the model I found out that the measurement are deferent between…
Material choice: Tube: petg - so it is slicky Lid: petg/abs - generaly it can be whatever platform: abs/pla - you generally want to payload to stick to it screw: petg - also slicky , use brim dial: petg/abs - (it has bendy teeth, which…
Create Your Own CoolRacks for Centrifuge Tubes from Delivery Cool Packs! With this model, you can make your own CoolRacks by simply upcycling the cool packs you receive with deliveries in your lab. The racks can be treated with 70% EtOH…
Custom 48 position microplate for 2 mL vials (12 mm OD) with chamfered edges to aid in easier automated placement of vials into the block. Positions are labelled A-F, 1-8, with a marker on the top face pointing to position A1. Depending…
Syringe protector for 2 BD 2ml syringes, to be able to be transported premade in case of need. can fit in the IKEA EFTERFRAGAD foodwarmer (or colder)
3 sizes: 40 well, 60 well, and 80 well. Bottom of each well tapers to a point to help tubes sit upright. All sizes are available with and without handles. Print with 15% infill and supports if printing handles. Dimensions (mm): 80 well:…
2 sizes: 96 well and 120 well. Arranged in rows of 8 spaced 9mm apart to allow for multi-channel pipetting with some common brands of pipettes. Bottom of each well tapers to a point to help tubes sit upright. Both sizes are available with…
There is a version with and without handles. Holds 48 0.2ml tubes, 40 0.5ml tubes, and 36 1.5/2ml tubes. The bottom of each well tapers to a point to help tubes sit upright. The 0.2ml tubes are arranged in rows of 8 spaced 9mm apart to…
This is a remix of joepie91's paint tube holder for 12ml tubes with slightly wider holes, so it fits my paints that had a taper from 11.5 to 13mm. Does not require any supports and seems strong enough with default settings, but I lowered…
Magnetic racks for DNA extractions - printed out of PETG - with tree supports on build plate only. Fits 12mm diameter 2ml thick magnets into larger rack, and 6mm diameter and 5mm thick magnets for the PCR strip tubes. Note: 12/9/2025 - I…
Space efficient bottle holders for 32ml and 35ml bottles for Ikea Skadis board
I don't have a vortex paint mixer, but I do have a Theragun massager, so I created this attachment so I could use the Theragun as a vibrating paint mixer for my Monument Hobbies Pro Acryl paints. Sized for their standard 22ml bottles.…
Was looking for a holder to organize some paint tubes. This one ended up working out great. No glue needed, it fits snug inside the bin. Holds the tubes very well. I was even able to turn it a bit past 90 degrees vertical and the tubes…
This holder was designed for a specific lab workflow: pre-mixing reagents or samples in 2 mL microcentrifuge tubes before distributing them by column into microtiter plate wells. Each rack holds 12 tubes, matching a full microtiter plate…
Support permettant de mettre à sécher 5 tubes à essai de 2ml après les avoir lavés. (utilisé dans le cadre de traitement des allergies pour ma part) Imprimé sur : Anycubic Kobra S1 Buse : 0.4mm Hauteur de couche : 0.2mm Remplissage : 10%
Petit support simple permettant de stocker 21 tubes à essai de 2ml dans un balconnet de réfrigérateur. Utilisé dans le cadre de traitement des allergies (3 semaines de doses). Impression en PLA (réglages basiques suffisants), disposer le…
This screw hole for this lid fits threads with an outer diameter of 8.5mm (1/3"). The cap is 12-sided, for use with a variety of wrenches should it get stuck. I made the top flat for easy printing, so it doesn't require supports. Shown…
Cover for a Softsoap liquid hand soap dispenser. Slide into the sleeve (snug fit) and unscrew dispenser top and put through the top and screw the dispenser top back on.
Designed in Tinkercad for the Habit 2ml disposable vape. Simple pocket holds the device upright on a desk or nightstand. Four STL versions included: Sauce and Exotics in both original blocky and slim base styles. Sauce and Exotics…
Небольшой органайзер для тюбивок с краской. Размер отверстий под тюбики: - Ширина 12,6мм - Глубина 13мм. Печатал из PETG без поддержек, заполнение 10%, стенки 3.
Einen einfachen Ständer für meine Marabu-Acryl-12-ml-Tuben mit einem Sichtfenster, um die Farbcodes sehen zu können.
A simple adapter for 0.2ml tubes to fit in a 1.5ml microcentrifuge slot. Try and ensure your print comes out to approx 1.57g. I printed mine in ABS but that is likely overkill. PLA should do just fine.
A simple but essential tool for scale modelers. The standard 12ml Zvezda glue bottle is notoriously unstable. This holder features a wide, weighted base to prevent accidental spills that could ruin your model or workspace. Compatibility:…
4x3 (9) 1.5-2mL tube holder for ice buckets. Also, an insert to fit underneath to aid flotation - I used TPU-Air.
Got a messy bench and need something to hold your paint bottles while still being able to see the labels clearly, and easy to grab and replace? Here you go! Enjoy!
The original design for the citadel is so simple and clean to print designed by JanAlleman. I've adapted it to fit 6 Arteza 22ml tubes which sit in nicely hanging. At a later stage I'll adapt the edge to have a slight lip. They will hold…
Based on the Vallejo Paint Rack from Stu Cameron - a paint rack for Citadel paint bottles of sizes 12ml, 18ml & 24ml, 32mm in diameter. Two variants - 3 or 4 rows, depending on space available if you're trying to fit it in a cabinet or…
The one shown in the picture was printed with .3 layer height at 200% speed on my Prusa i3 and took about 2-3 hours. The new design (Inkvent Bottle Holder Solid v2 ) has a thicker base so that it isn't as bendy.
Remixed from thingiverse file https://www.thingiverse.com/thing:5171603 Added holes to make it able to be hung. I printed mine in the color for each years calendar and it makes a nice display piece while also being able to easily find…
I was making some candies and didn't want to shell out for an expensive mold I liked, so I made my own. Each candy is 2ml at original scale. There are 105 of them. They're hexagonal gem shapes with alien faces on the top. I printed this…
Syringe extender for 2ml plastic syringe. I made this Syringe extender for Stichting AAP in The Netherlands. They need to give injections to the animals, and at times you want to have a bit more distance between you and the animals. This…
It's just a simple centrifuge head to attach to a DC motor (powered with 9V). I did simple tests and it works fairly well. Warning: do touch with your fingers or put in contact with objects while it's working, it hurt, and it can damage…
Farb Rondell für 12ml Tuben 0,2mm Support für das Rondell notwendig.
This is a paint rack to store professional artist grade paint in an organized way. I use it to keep Golden Acrylic tubes organized in a drawer but I imagine it would fit other paints as well. Leave a comment if you need models generated…
Model can be printed on its base without support, because overhang wall is designed at 45° angle. I have printed it using 2 walls, 0.28mm layers and 10% adaptive cubic infill and would be printed very well if I did not forget to change…
An easy and ultimate solution to store your Wood Glue upside down to always be ready to go. Must have if you work a lot with wood glues. Printing tips: Fine to print in PLA or PETG 2 or 3 perimeters will be more than enough No support…
This holder holds 22ml paint tubes with a ~14mm collar and is mounted on IKEA Skadis pegboards using universal hooks.
Turn a used Coca-Cola 222mL can into a container for germinating avocado seeds.
A cover for 222mL aluminum can avocado seed holder.
I was looking for an acrylic paint organizer to sort my 12ml tubes, but couldn't find exactly what I was looking for. So, I made this. Infill: 10% is great Material: Whatever you want :) I hope it serves you well!
this is sized to help make counting narcotics or other controlled 2ml vials easily. The numbering is raised and to make it black I just went over it with a black sharpie. Its held up for 2 years now of use.
3x3 Gridfinity hexagonal rack for storing 12mL paint tubes from Royal Langnickle - STL + Solidworks
Customized version of http://www.thingiverse.com/thing:600508 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=600508 Instructions Using the following options: volume = 2 res = 50 wallThick = 1.04 pi =…
