Counting matching models…
PLEASE PRINT WITH TPU FOR OPTIMAL PROTECTION You may need to print with skirt to avoid warping. During my beginning period of FPV, my drone once crashed with the batt touching the ground, almost causing a fire. After that I realized the…
What's better than a battery case? A battery BRICK. These battery cases are intended to be printed in TPU and sized for for 300mAh ‘stick’ style tiny whoop batteries. I recently replaced all my rolled cell BetaFPV 300mAh lipos with the…
I have adapted the case from user Hero. once. Now it fits eight 300mAh Lava batteries and on the lid you can find the outline of Sailor Moon ( the case is for my girlfriend ) - of course only the bottom part can be charged, as it is…
This 3D printable case is designed for the LoRa32 module (ESP32 with LoRa and OLED display) and includes space for a 1300mAh Li-Ion battery . The design offers protection and portability, making it ideal for outdoor or mobile IoT…
Second version is 2mm longer Split the model in your slicer and flip the lid. see photo. individual halves of model files available Lid infill should be high to help prevent any warping v1.3 changes: used fillets instead of chamfers on…
A little box to keep your FPV lipos organized in and outside your fireproof bag. You can put in 10 lipos. The fireproof bag has the following dimensions 21,5 x 16,5 x 14,5 cm you can buy it on amazon. I printed mine in ABS.
Battery box for the slightly thicker, taller 300mah batteries. Place the batteries horizontally for empty, vertically for full See https://www.thingiverse.com/thing:2515934 for the original. Print Settings Printer Brand: Prusa Printer: i3…
Covers the end of a 300mAh 1S battery from getting damaged in crashes. Improves longevity of the life of the battery. May fit other 300mAh 1S batteries of other brands Part is showcased in video above.
I designed this thing to fly 1s300 packs on a Happymodel Mobula 7 frame. It has a good friction fit on the battery, similar to a mobula6/meteor65. It snaps in place so you can keep it in several packs in a row, and pop it out easily when…
I was struggling to use the mount shipped with the frame to mount my Caddx Ant Lite w/ connectors. This modification lengthens the mount, so that you can grip around the connectors. In addition, the LiPo holder has been made slightly…
Update V2: Made the balance plug socket a bit smaller. Increased the width for the straps so it better fits on the geprc mk4. Printed with Esun TPU 95A.
Hold the batteries together so they won't mess up your bag. Easy to print. Fast to print. Cheap to print. The Fusion 360 source file was built with parameters, you can use it to modify the size to fit your batteries.
Holds 10 or 20 batteries. choose your version.
With this adapeter the 300mAh Akku has the size of a 450mAh Akku. So you can use it for a Drone with a 450mAh slot.
Modified Battery Holder for the Fractal Engineering - Fractal 65. Remixed and modified a bunch from another design. This will let you use a GNB 300mah 80C A30 Pink battery. I bought these not realising how big they were. The battery loop…
Use TPU, supports and about 10-15% infill
A two-cell Gridfinity module for storing up to (15) 300mAh 1s batteries.
I have made a holder for Lipo 6s 1300mha batteries which fits into an ammo box with a size of 280mm x 140mm each capacity for a battery is 50mm x 42mm for 15 batteries. The holder is divided into 2 parts to fit both P/X/A1 series printers…
it fits 22 standard gens ace, tattu, lava 300mah batteries (should also fit 260mah). Vertical/horizontal holes for marking charged/discharged batteries (cahrged vertically |, discharged horizontally - because it represents a minus.. :D)…
1 Lipo box for 250 or 300mAh + one cover for each The cover can screw to the bottom of the box, this way you dont loose it ! Fit perfectly with 1s LAVA
Tested with WeBleed 1S 300mAh and BetaFPV 1S 300mAh batteries. Filament: Eryone PLA+ Printer: Bambu P1S
This fits between the 2 battery holder bars of the Mobula7 frame, put the longer side in first and then squish and pop the other side in. This also fits the Beta75pro frame if you cut off the existing battery holder trimming it flush and…
Here is a battery holder for "Whoop" style stick batteries, it was tested with BetaFPV 300mah and smaller batteries. You can adjust the columns and rows to hold more or less batteries. it is designed so that it will stack on the lid when…
A support to better locate the battery, printed in TPU Print instructions Category: R/C Vehicles Summary A support to better locate the battery, printed in TPU Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: Yes…
Please post a make if you print one! :) Remixed this holder to extend in to one of the built-in loops on the v3 chassis. I am running 300mAh RaceDayQuad 1s packs x 2. Hollowed out some areas to save weight. Left material where I did so it…
A 20 S1 300mah battery holder.
Printed by prusa mk3s+ Matirial : Tpu 95 support : tree support (organic) I used the option autopainting in PrusaSlicer and recommend you too. The grid faces to the surface. Push the connector to the high hole and than pull from the two…
If you find my designs useful, please consider sending a tip Quick and dirty remix of Callidus80 's charger cradle to fit a TerraTek charger and TTSB18-2 18v 1300MAh battery. Print Settings: Quality: 0.2 Infill: 20% Brim: Yes (Personal…
This is a battery storage case for betafpv 300mah tiny whoop battery. I am not sure if this storage case will fit any other battery. Use recommended settings. I added a pause so you can put the magnets in. I used D8 x 2 round magnets.…
A simple TPU holder for five 300mAh whoop batteries. You can also use it to easily differentiate between charged and used batteries by just flipping the uncharged battery.
Made this simple battery case for Dogcom 6S 1300mah Batteries, it can hold upto 3 batteries. It has slits on both sides which i use with velcro and optional cover which you can just put on to it doesn't have any way to lock in, maybe in…
Shockflyer Akkubox für Goosky 2S-300mah Akkus Für alle die kein Klettband an die Akkus machen wollen um sowohl Heli als Fläche damit zu fliegen.
2 1s 300mah battery holder for 75mm whoop frame , to run 2s. Printed using 98A tpu , very lightweight 0,3g, put it under the battery tray
This is a sligtly modified version of the long-narrow insert for @re1neke's excellent battery case modified to fit the Nitro Nectar 300mah NX69 race batteries. I found the Nitro Nectar 300mah 1s batteries to be a pretty snug fit in the…
