Counting matching models…
Nissan 300ZX (Z31) Assembly required. Can be printed separately Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of…
This is an adaptor for putting a 3" air filter onto a factory 300ZX Z32 N/A MAF sensor. I'm unsure if the TT uses the same MAF dimensions. Screw in version has a 7mm hole, mainly designed for using 6mm bolts and nuts, but I may make one…
https://nicksdocumentation.home.blog/2018/11/30/1986-nissan-300zx-hvac-repair/
These are the plates to blank off the IACV, EGR, and Cold Start Valve on a Z31. These were designed and tested from an 88 300ZX Turbo, unknown if it fits other years or naturally aspirated cars, so do your own research. Print in PETG or…
This is the rubber grommet/mount that fits on the bottom of the AC condenser and fan, where it mounts into the chassis. These are NLA from Nissan and fairly hard to find by themselves. You'll want to print it out in TPU. I printed mine on…
Nissan 300ZX Z32 as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
This is a replacement Tension Rod Bushing for the 88-89 Z31 300ZX. The 88-89 Z31's are different than other years and it's much harder/more expensive to source bushings. This is based off of my measurements of a poly replacement bushing…
A combination plate adapter bracket and hidden battery tender connector bracket for the rear plate holder of JDM Z32 Nissan 300ZXs. Hooks into the bottom of the plate bracket (remove the plastic caps on the hooks if yours are still…
A replacement seal rubber gasket for the 1984-1989 300ZX. This replaces the crumbling gasket/seal found on nearly all Z31s. This could use some more refinement, but fitment is acceptable at this stage of development. Changes have been…
This is a Stud retainer for the 3rd brake light bar on a 1996 Nissan 300ZX. I was replacing the bar that was broken, really common problem on these, and ended up twisting the stud inside of the plastic retainer. Had to destroy the…
Replaces the plastic plate inside the factory Hitachi power antenna. This plate keeps the nylon cable rolled safely inside the hub.
My Z32 300ZX has its factory clock removed by previous owner and they put in a HKS Turbo Timer Type 1 (8th Model) that fits in the factory clock position. I made a bracket that screws into the factory screw holes for the radio to support…
This bracket is similar to already commercial available metal brackets on the market, with an addition of a extra hole for using zip-ties to secure the PTU-cable. with this you can move the PTU from the scorching engine-bay to the front…
Use these to cover the fuel gauge sender hole and the fuel pump hole. Insert your preferred cleaning agent into the fuel tank and shake.
This is a Stud retainer for the 3rd brake light bar on a 1996 Nissan 300ZX. I was replacing the bar that was broken, really common problem on these, and ended up twisting the stud inside of the plastic retainer. Had to destroy the…
Scanned the profile and then converted to svg then added the protrusion that engages the trim. Modeled after the clips used on the later Nissan 300zx Z31s
Replacement hook clip for the cargo roller on Nissan 300ZX Z32. Print in material suitable for car use.
Update: More pictures coming soon… Purpose My original rear hatch, latch plastic cover was broken from tension and age. Replacements are hard to find and equally aged. Print Guide Printed on a texture plate to blend in a bit more. I used…
This bracket is similar to already commercial available metal brackets on the market, with an addition of a extra hole for using zip-ties to secure the PTU-cable. with this you can move the PTU from the scorching engine-bay to the front…
Welcome to The Low Poly Auto Show! This is a Nissan 300ZX Z31. Print this model with NO SUPPORTS if your bridging skills are up to the task. Details/fit may not print as intended if the print is scaled down. Each remastered model is…
Replacement Nut for the 300zx Z31 power antennas. Threads are M18x1.
Use these to cover the fuel gauge sender hole and the fuel pump hole. Insert your preferred cleaning agent into the fuel tank and shake.
Fixes the rubber that cancels brake lights and cruise control. Has an over hang so print with support, TPU, and 50%+ infill.
Scanned the profile and then converted to svg then added the protrusion that engages the trim. Modeled after the clips used on the later Nissan 300zx Z31s
Replacement hook clip for the cargo roller on Nissan 300ZX Z32. Print in material suitable for car use.
Center console blanking plate, 2 models 1 with cut outs for led back lighting
This is a harness or vacuum hose clip for the Z31 300ZX, but I'm sure Nissan used it on other models. Apparently these are NLA and people want them, so I made a copy. PN#: 14962M or 24220B0701 Category: Automotive
Designed to use a couple of brass inserts and m3 screws to make for a very strong fitting.
This clip secure your upgraded aluminum radiator hose directly to the sway bar. A common upgrade for the 1990-1996 Nissan 300zx is to upgrade the lower radiator hose to a solid aluminum pipe. This upgrade at one time used to have a…
This is a hood-prop clip I modeled and printed for my 1993 Nissan 300zx. I'd recommend printing it in ABS or some other higher temp material. I printed mine in PLA, but haven't had it in use long enough to stress test it. It does clip in…
Update: Added two pictures of the laser cut plates + cork gaskets installed. They are a tight fit but work great after several thousand miles on them. Purpose Reverting back to OEM style suspension requires a shock support plate (and…
Warning: I have only validated the drivers side. The passenger side should be a mirror copy but I have not confirmed. Purpose The original T-top handles are no longer in production, brittle, and used examples are hard to find. Also in my…
