Search results: 31mm

Counting matching models…

Washer stamping jig 31mm 1.25inch Blockmit Cold Wallet Crypto Seed Phrase Backup

Remixed to fit for 31mm and 1.25inch Washers to Blockmit for Cold Wallet to Backup Crypto Seed Phrases

Downloads: 394
Likes: 19
Rating: 0

Dell Power Supply Mount - 31mm

I created this under desk mount for a Dell power supply. Theoretically it should fit any power supply as long as it's 31mm in depth to allow the bracket to hold it correctly. Printed with these settings: 30% gyroid infill 4 walls brim

Downloads: 286
Likes: 33
Rating: 5

Order a print of this model

PrintablesHampej

Crevice Tool Vacuum Hose Attachment 31mm

Printer: Prusa Mini+. Material: Prusament PETG. Layer Height: 0.2mm. Nozzle: 0.4mm. Printed with 100% infill. No supports needed. Four different models, two are thicker at the shaft for durability, and two are thinner and needs less…

Downloads: 214
Likes: 20
Rating: 5

Order a print of this model

Printablesjohn doe

gopro bike mount 31mm with zipties

Gopro mount for 31mm handlebars Attach it with zipties Category: 3D Printing

Downloads: 201
Likes: 20
Rating: 5

Order a print of this model

PrintablesHampej

Wide Vacuum Hose Attachment 31mm

Printed with 0.2mm PETG on a Prusa mini+. Works on vacuums with a diameter of 31mm. Made in Tinkercad. My first model i publish, hope its helpful for someone! :D

Downloads: 172
Likes: 25
Rating: 5

Order a print of this model

PrintablesSjölin

Sturdy 31mm Watch Caseback Tool

You may need to scale the model by a percent if its not perfect for you, some tolerances are already built in.

Downloads: 165
Likes: 6
Rating: 5

Order a print of this model

PrintablesHoshCraft

IKEA Skadis bottle holder 75mm & 31mm (t-clip)

A simple 75mm and 31mm bottle holder for IKEA Skadis pegboard system. It uses the T-Clip system to secure it to the board. It can be printed without supports but depends on how clean you want the top of the T-Clip cutout. 75mm source file…

Downloads: 132
Likes: 17
Rating: 5

Order a print of this model

PrintablesGirak

Cateye Bike Light Mount for 31mm Post

A bike light mount designed for the Cateye TL-LD130 / TL-LD150 and similar Cateye lights. A 6-32 screw and nut works well to secure it. It's a friction fit with the bike light, if your tolerances don't provide a tight fit, then scale the…

Downloads: 117
Likes: 7
Rating: 0

Order a print of this model

PrintablesDieti

IKEA Skadis Bottle Holder 31mm (4 Bottle)

Skadis Holder for 4 Bottles. I use this for glue Bottles from Temu. (30ml)

Downloads: 106
Likes: 23
Rating: 5

Order a print of this model

PrintablesHody Hong

Hasselblad A12 Back Mount, Nons Hasselblad Instax back mount. Mamiya sekor 65mm f/6.3 lens board with M58 to M58 x0.75 17-31mm Helicoid

All in all, I loved this light and portable set up. Great inspiration + starting point from @Spotmatic. It is a night and day difference compare to my Hasselblad 500cm + 60mm distagon. With a bit of practice, the 65mm Mamiya sekor is an…

Downloads: 104
Likes: 16
Rating: 0

Order a print of this model

PrintablesEduOzzy

Dell Power Supply Wall Mount - 31mm width

This is a simple design that allows you to hold your power supply in a place like a wall, hidden under your table, or anywhere you might think of. You can use VHB Tape or screws to hold it in place. At the picture I used screws, so it…

Downloads: 92
Likes: 10
Rating: 0

Order a print of this model

Printablesmrusk

Switch Cover (26x31mm)

My variation of a missile style switch cover. The cutout is 26x31mm. The cover provides a printed M2.5 thread. Mount with M2.5 screws of any sensible length. Print cover as provided in the model standing on the flat area.

Downloads: 92
Likes: 22
Rating: 0

Order a print of this model

PrintablesTadrir31

IKEA Skadis Bottle Holder 31mm Diameter

Maximum Inner Diameter of the Hole is 31mm. This is a Ikea Skadis Holder for your E-Liquid Bottles. To be exact the 60ml ones. Should Fit Standard 60ml Bottles, 30mm Diamater. I also tried to Minimize the Use of Supports by putting the…

Downloads: 87
Likes: 10
Rating: 4.5

Order a print of this model

PrintablesCharlie Root

Garmin eTrex bike mount 31mm

UPDATE 22/12/26: added more material to latch to increase strength (garmin_mount_221226.STL). holes for M3 nut and screw (screw lenght 30-35mm) no supports in holes use Mesh Tools to split model and position like on picture Category:…

Downloads: 79
Likes: 5
Rating: 0

Order a print of this model

PrintablesLegacy_Micro

BASIC MODEL: 4mm Copper Crystal Speaker Amplifier Terminal Binding Post Banana Jack 31mm

Downloads: 77
Likes: 5
Rating: 0

Order a print of this model

PrintablesMarcK

S37x9 - B147 - Senker-Set - Ø4.3-31mm

2x Halterung für Senker-Set - Ø4.3-31mm - 37x9 - Lochwände oder Skadis Passend zu: S37x9 und Skadis Lochwände 2 Versionen: Ø5-31 und Ø4.3-20.5mm Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix Grundplatte 2" - B67…

Downloads: 73
Likes: 11
Rating: 0

Order a print of this model

PrintablesDarMatan

1:18 Rim 48mm x 31mm

This is a rim for WLToys 1:18 RC Car that takes 48mmx31mm rims with a 3mm hole in the middle and 7mm nut shaped hub. If you have any questions feel free to comment or dm me. Print Settings Printer: Custom CoreXY Rafts: No Supports: Yes…

Downloads: 69
Likes: 3
Rating: 0

Order a print of this model

PrintablesMrKiryan

MultiBoard Paint holder for 31mm diameter bottles

I needed to organize my son's paint bottles onto his multiboard. The snaps are printable on their side without support. They are filleted for easy fit/removal. Holder bars come in 3, 4 or 5 bottle per bar allowing for more or less any…

Downloads: 67
Likes: 16
Rating: 4

Order a print of this model

PrintablesKaizen Minis

Paint Rack | Paint Tray for 30-31mm Diameter Paint Bottles

20 Lot for Arkom paints or Hiro Paints or anything 30-31 diamater Bottles

Downloads: 63
Likes: 8
Rating: 0

Order a print of this model

PrintablesObachtEtzi

Short crevice nozzle for a vacuum cleaner 31mm

Short crevice nozzle for a vacuum cleaner with a 31mm pipe connection. Simple, small print – fast and filament-efficient.

Downloads: 55
Likes: 6
Rating: 0

Order a print of this model

PrintablesTheOnecassu

131mm electric hoverboard motor

the first thing i made in f360. so it might not have the best time line

Downloads: 48
Likes: 4
Rating: 0

Order a print of this model

PrintablesScopuli

Playmobil Replacement Wheel/Tire (15mm width, 31mm diameter)

Printed with TPU without support on Anycubic Kossel Plus (Printing Temperature 230.0 C, Build Plate 40.0 C, Print Speed 60.0 mm/s )

Downloads: 48
Likes: 5
Rating: 0

Order a print of this model

PrintablesJason McCullough

50mm guide scope mount 31mm/Finder dovetail

Used M3x12 socket heads with nuts. Made out of PETG for strength. All one piece since i was more concerned about movement of the guide scope during tracking vs alignment w/main target.

Downloads: 48
Likes: 4
Rating: 0

Order a print of this model

Printablesosterwood

Festool D27 to 31mm Taper

STL & STEP models provided for your slicer. If you need to change the taper dimensions, the source F3D file is attached as well.

Downloads: 46
Likes: 6
Rating: 0

Order a print of this model

Printablesslash66

Dyson Adapter 45° D=31mm

45° Dyson Vacuum Adaptor for 31mm Tube. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Yes Resolution: 0.28 Infill: 100% Filament: any PLA, PETG any Category: Household

Downloads: 45
Likes: 5
Rating: 0

Order a print of this model

Printablesap.engineering

Feet/Stand/Holder for up to 31mm Tube

I designed this feet/holder/stand for some agility jumps which had a 31mm tube base. You can use it for any tube, up to 31mm that you need to hold/stand upright. SolidWorks project is included for easy remix in case you need to adjust…

Downloads: 43
Likes: 17
Rating: 5

Order a print of this model

Printablesshahgiprints

Watch Movement Holder 31mm for G-Shock GA-2100

Simple watch movement holder. Specifically it is designed for the Casio G-Shock GA2100 or other similar sized movement.

Downloads: 42
Likes: 5
Rating: 0

Order a print of this model

PrintablesLukáš Janík

Key for 31mm screw bottle caps / Klíč na 31mm PP lahve

This key is supposed to help when operating with large number of PP bottles. For caps with 31mm diameter.

Downloads: 39
Likes: 7
Rating: 0

Order a print of this model

PrintablesError338

Filamentrollenadapter 31mm --> 73mm

Hab es mir für meinen Creality Ender 2 Pro konstruiert und gedruckt. Passt auf jeden Fall für GEEETECH Rollen

Downloads: 38
Likes: 0
Rating: 0

Order a print of this model

Printablesdavidm84

Dust Collector Adapter 31mm to 41mm

Simple Adapter for my Dust Collector from 31mm to 41mm. There are twi versions: One is Straight 31mm and 41mm One is tapered form 30mm to 31mm and 40mm to 41mm Category: Hobby

Downloads: 37
Likes: 6
Rating: 0

Order a print of this model

PrintablesPaŠe

31mm adapter for 3D4U Borehole Cleaning Aid

A plug-in adapter allowing use of 3D4U by Miele Borehole Cleaning Aid (https://www.printables.com/model/663696-3d4u-by-miele-borehole-cleaning-aid) with non-Miele vaccum (31 mm dia) comply Remix Culture not allowed policy - separate from…

Downloads: 37
Likes: 5
Rating: 0

Order a print of this model

PrintablesKriseye

AOS 7" 31mm / 20mm Spacers complete TPU Set

V1 J'ai construit la machine en utilisant le châssis classique AOS, car à l'époque de l'achat, la version "evo" adaptée aux 7" n'existait pas encore. J'avais une stack Axis Flying massive destinée à un autre projet, mais ses qualités…

Downloads: 37
Likes: 5
Rating: 0

Order a print of this model

Printablesdodasch

Bike Work Stand 31mm Grip Kashima Protection

You need to print 4 pieces for one clamp

Downloads: 36
Likes: 16
Rating: 0

Order a print of this model

PrintablesJer

31mm Vacuum Hose Coupler

I made this to connect a Makita XDS01Z to a BucketHead wet/dry vac. Tapered fit to 31mm OD on both sides.

Downloads: 36
Likes: 2
Rating: 0

Order a print of this model

PrintablesKaizen Minis

Paint Rack | Paint Tray | With Brush tray or Acessories Tray for 30-31mm Diameter 10LOT Paint Bottles

10 Lot for Arkom paints or Hiro Paints or anything 30-31 diamater Bottles. Has a Alloted Tray Fo Hobby Tools and perfet for on the go coz it Fits a Standard Caboodle

Downloads: 35
Likes: 5
Rating: 0

Order a print of this model

PrintablesRyan Nolan

BLTouch Spacers (1mm to 31mm)

Yet another Printable spacer kit for the BLtouch. They are stackable. 1mm = 1mm 2mm = 2mm 3mm = 1mm + 2mm 4mm = 4mm 5mm = 1mm + 4mm 6mm = 2mm + 4mm 7mm = 1mm + 2mm + 4mm 8mm = 8mm 9mm = 1mm + 8mm 10mm = 2mm + 8mm 11mm = 1mm + 2mm + 8mm…

Downloads: 34
Likes: 3
Rating: 5

Order a print of this model

PrintablesJens83

AEG HBS100 belt sander 31mm osVAC adapter

Adapter for 31mm dust extraction connector, designed for old AEG belt sander HBS100 Category: Tools

Downloads: 30
Likes: 1
Rating: 0

Order a print of this model

PrintablesRoostaff

Cut Ptfe 31mm_VERTEX for revo mk3s

j'ai juste ajouté une coupe a 31mm pour les ptfe des hotend revo, texte non modifié, libre a vous!

Downloads: 30
Likes: 2
Rating: 0

Order a print of this model

PrintablesStrandedOrg

Solar Panel Mount ( Taper from 31mm to 26mm diameter )

Simple mount for my outdoor lighting solar panel. The mount taper off from 31mm to 26mm diameter to fit a variety or different applications. I originally made it for the Home Depot Hampton Bay 3 LED Spot Light kit to mount it on a fence…

Downloads: 29
Likes: 6
Rating: 0

Order a print of this model

PrintablesROTFOK

Vape Holder 6 x 31mm juice bottles Rotate 360

Organize your vape juice bottles, print 3 parts separately, do not print as one model, no supports needed, 15% to 20% infill, PLA or PET G can print in 0.3mm.

Downloads: 29
Likes: 4
Rating: 0

Order a print of this model

PrintablesManticorp

Cable Tie Plate - Flat Easy Print - 31mm square

Really simple cable tie plate. Designed for easy mounting tape with 30mm tape.

Downloads: 25
Likes: 2
Rating: 0

Order a print of this model

PrintablesPoikilos

Dice Tower with Fold-Up Trays (stronger, better alignment) - 131mm tall

I recommend using the supports I included. The origin is set the same as the model (use supports marked "square" for the tray with ends marked "square") so that you can use the "Join" feature of your slicer. You could also use your slicer…

Downloads: 23
Likes: 11
Rating: 0

Order a print of this model

PrintablesPavel

pipe clamp , objimka , 31mm , kondezator , condenser

Používám na kondenzátor 10 000 ; 50v ; 30mm

Downloads: 23
Likes: 6
Rating: 5

Order a print of this model

PrintablesTweakymoss

31mm pole support

Pole support for shower curtain or closet pole Fit 31mm diameter pole or less

Downloads: 21
Likes: 1
Rating: 0

Order a print of this model

PrintablesLegacy_Micro

BANANA PLUG MODEL - SOLDER TYPE - SAFETY TIP : (6x31mm)

BANANA PLUG MODEL - SOLDER TYPE - SAFETY TIP : (6x31mm) ------------------------------------------------------------------------------------- Common component used in DIY multimeter / test leads.

Downloads: 21
Likes: 2
Rating: 0

Order a print of this model

Printablesrokr

Universal Strong S-Hook - 31mm Inner Diameter

**Key features:** - **Inner Diameter:** 31 mm (fits well on standard wardrobe rods, dowels, or bars) - **Sturdy and Reliable:** Designed to hold heavier items securely - **Easy to Use:** Smooth curves make it easy to hook and unhook items…

Downloads: 20
Likes: 3
Rating: 0

Order a print of this model

PrintablesFloke

Air Conditioner Hose Clamp Adapter – 131mm OD

Air Conditioner Hose Clamp Adapter – 131mm OD This 3D-printed adapter is designed to securely clamp an air conditioner exhaust hose to a wall or window panel. Ideal for portable AC units, this part ensures a snug and stable connection.…

Downloads: 19
Likes: 1
Rating: 0

Order a print of this model

PrintablesChris S.

31mm Elgato Multi Mount Adapter

I added my Phone in the middle between my Monitors and needed a 31mm Pole adapter for an Elgato Multi Mount clamp (as I had it left). It fits good, but the Elgato Part need some rework. It's my first model ever.

Downloads: 16
Likes: 0
Rating: 0

Order a print of this model

PrintablesBjorn V

ONE PIECE light botton lid (modified for small led candle 31mm)

Bottom part modified to fit a small IR led "candle" (see photo for example led)

Downloads: 15
Likes: 2
Rating: 0

Order a print of this model

Printablesmfraz74

22x31mm NFC for Rolodex-Style Card Holder

Printed at 0.12mm layer height with a 2mm brim. No support required.

Downloads: 15
Likes: 0
Rating: 0

Order a print of this model

PrintablesBryce Casamento

Brownie Hawkeye Adapter for 31mm push-on filter adapters

Made for me to adapt a Kodak Series VI 31.5mm Adapter ring to use a close-up lens on my Brownie Hawkeye for taking portraits, with an adapter flash. (Two wires & electrical tape) I printed in 15 minutes on a stock ender 3 in PETG with 20%…

Downloads: 15
Likes: 2
Rating: 0

Order a print of this model

PrintablesHugo

X-Carriage prusa i3, 31mm spacing (for nema 17) with 4 bearing.

I remixed the X-carriage to mount a Nema 17 (using the back screws) with 4 bearings (more stability). Should work, but I'm still waiting for my MK8 in order to test everything out. Instructions Print standing (for more stength in the…

Downloads: 14
Likes: 0
Rating: 0

Order a print of this model

PrintablesSwimminginprojects

Vacuum nozzle for narrow places (inner diameter 31mm)

Printed standing without supports. Used PET-CF. Used 4+ walls and 45%+ infill for strength. Tip: Scale up or down in the slicer if you need another connecting dimension.

Downloads: 13
Likes: 2
Rating: 0

Order a print of this model

PrintablesTyp_im_dunkelln

Desk Clamp Foot Pad for <=31mm feet

Somehow the anti scratch protector of my mic arm's desk clamp got lost, this a replacement to be printed in TPU to protect your desk from scratching up when attaching a clamp to it.

Downloads: 12
Likes: 4
Rating: 0

Order a print of this model

Printablesbluentity

31mm Tinywhoop "X" Frame

Frame for a 31mm "Tinywhoop" style drone with a 25mm AIO board (the board in the examples is the EMAX Nanohawk AIO). The major issue with this design is flexion of the "X" base affecting trim. Print it with as stiff a material as possible…

Downloads: 11
Likes: 3
Rating: 0

Order a print of this model

PrintablesNCC Racing

NCC - 31MM STRAIGHT COOLANT PIPE CONNECTOR 8MM T JOINT

NCC - 31MM STRAIGHT COOLANT PIPE CONNECTOR 8MM T JOINT FOR BLEED LINE/OVERFLOW - PART OF WHAT WAS NEEDED FOR THE MK3/2 SCIROCCO RADIATOR BUILD - MAYBE SOME USE TO FELLOW IDIOTS :D

Downloads: 11
Likes: 4
Rating: 0

Order a print of this model

PrintablesNo Name

31mm o ring for umarex notos magazine

I didnt have the right size rubber o ring. i made one in tpu instead. i tried 27mm 28mm and 30, 31mm was the sweet spot.

Downloads: 10
Likes: 2
Rating: 0

Order a print of this model

PrintablesSpectura

Worx Cube Vac 31mm O.D. Nozzle

I was looking for a model, but most people measure vacuum nozzles by I.D. This vacuum however accepts accessories that are held on the outer diameter, so I just threw something together quickly and it seems to work just fine both in the…

Downloads: 9
Likes: 3
Rating: 0

Order a print of this model

PrintablesTroyjones

16 color LED PCB adapter (31mm diameter)

This adapter kit is intended for use with this lamp assembly and allows you to replace the bambu style LED lamp with a 16 color LED PCB 31mm diameter lamp sold on Aliexpress for ~$4.00 with remote. The light diffuser is required to reduce…

Downloads: 8
Likes: 3
Rating: 0

Order a print of this model

Printablesdnl42

31mm Bottle Stand

This stand will keep your 31mm bottles upright while you use them. I use this for Microscale Industries products. I printed the parts in PLA at 0.2mm structural with default slicer settings. No supports are needed with proper part…

Downloads: 8
Likes: 3
Rating: 0

Order a print of this model

PrintablesMaxxPayne39

Vortex Mixer Head for 31mm bottles

For years I have used a Scilogex vortex mixer for my hobby paints, to shake them up. The head that came with it was perfect for my smaller paint bottles (I.E. Army Painter, Scale 75, Vallejo, etc…), but the larger paint bottle didn't fit.…

Downloads: 6
Likes: 1
Rating: 0

Order a print of this model

PrintablesFrank Buurlage

Adapter for CNC dust shoe 31mm to 19mm flexible PVC

I’m sharing a simple Fusion 360 model I made to adapt an AliExpress dust shoe with a 31 mm hose port to a 19 mm flexible PVC pipe. The adapter includes a 2-degree taper to create a snug press-fit connection.

Downloads: 4
Likes: 2
Rating: 0

Order a print of this model

PrintablesAlex10061993

Staubsaugeradapter 35 auf 31mm

Downloads: 4
Likes: 0
Rating: 0

Order a print of this model

PrintablesMandius haraldseide

31mm Pool Cover Clip

simple snap-on pool cover clip designed for 31 mm round frame tubes . It helps keep the pool cover securely attached to the frame in windy conditions. Fits 31 mm round tubes Snap-on design No screws or tools required Easy to print…

Downloads: 4
Likes: 0
Rating: 0

Order a print of this model

PrintablesNasty23

multiboard loctite holder 31mm ID

easy print, may be a little thin but good for simple holder that saves plently filament 31mm inner round diameter, can be used for other items too Remember to push it in gently into multiboard holder to avoid cracking no supports, prints…

Downloads: 3
Likes: 0
Rating: 0

Order a print of this model

Printablesjo

Switchbot Adapter for Mortise lock (31mm square)

I wanted something quick. I took this model, sliced it at 7mm then added some simple solids / negatives using bambu studio Printed with tree supports using PLA.

Downloads: 1
Likes: 0
Rating: 0

Order a print of this model

Printables210Bravo

Strong 31mm Hook

Strong and basic hook. Designed to work with a #8 GRK Cabinet screw, but works with any #8 screw.

Downloads: 1
Likes: 0
Rating: 0

Order a print of this model

PrintablesArchetype FN

Vertical Manga/Book Stand 16mm-31mm book thickness

I designed this stand to display your books vertically , including thicker books and manga, while helping prevent the pages from spreading open. The stand is available in several different sizes, supporting books from 16 mm up to 31 mm in…

Downloads: 0
Likes: 0
Rating: 0

Order a print of this model

Printables

S37x9 - B147 - Senker-Set - Ø4.3-31mm

Order a print of this model

Printables

Dice Tower with Fold-Up Trays (stronger, better alignment) - 131mm tall

Order a print of this model

Printables

BLTouch Spacers (1mm to 31mm)

Order a print of this model

Printables

31mm Tinywhoop "X" Frame

Order a print of this model

Printables

Vacuum nozzle for narrow places (inner diameter 31mm)

Printed standing without supports. Used PET-CF. Used 4+ walls and 45%+ infill for strength. Tip: Scale up or down in the slicer if you need another connecting dimension.

Order a print of this model

Printables

Staubsaugeradapter 35 auf 31mm

Order a print of this model

Printables

pipe clamp , objimka , 31mm , kondezator , condenser

Používám na kondenzátor 10 000 ; 50v ; 30mm

Order a print of this model

Printables

Festool rail for 31mm desk

Order a print of this model

Printables

Tapon 31mm

Es un botón que realicé por primera vez para saber cómo realizar modelos

Order a print of this model

Printables

AR-15 Quad Magazine Wall Mounted Organizer 200x186x131mm

Printed in PLA w 0.4mm nozzle. I found that has sufficient strength with 4 walls. The version I uploaded is slightly larger than the one shown in the photo, and thus i did a slight angled trim at the corners to make it fit within a…

Order a print of this model

Printables

Leiterfuß 31mm x 25mm

Biete hier einen Leiterfuß 31 x 25 Wandstärke beträgt 3mm Drucken, kommentieren, liken, bewerten.

Order a print of this model

Printables

16 color LED PCB adapter (31mm diameter)

Order a print of this model

Printables

Pot Holder / Hanger (D:31mm/77mm, 10mm thickness)

I made this model for my small plant pots. The model is to be printed without supports. I made two versions but I am also adding .step file so you can make more versions if you have the CAD skills or ask me to make more versions.