67 models
Bike holder for the 32oz Nalgene Waterbottle. Will also suit other bottles of a similar diameter (92mm). Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Doesn't Matter Resolution: 0.2 Infill: 30% Notes: Printer…
A simple adapter to allow your 32oz Hydro Flask to fit in your cars cup holder. Was designed to fit in a Honda CRV but should work for others. Print with your standard settings for most materials.
Here's a a few simple boots for 64oz, 32-40oz and 12-20oz Hydro Flasks. There is also a version for the narrow top Hydro Flask and the Tumbler Hydro Flask . Please note, this MUST be printed in TPU to fit as rigid filaments will not work.…
Nalgene or 32oz bottle holder for a vehicle. It will need adjusted to your specific car cupholder size and possibly bottle with the STEP file
UPDATE 8/24/20: I've added Fusion 360 and STEP files for easier remixing. Sorry for not adding them sooner! I'm not hardcore about my bike nor about bike stuff, but I do care about having a good water bottle with me when I ride. So I made…
This is an adapter for my Cirkul water bottle. I made it specifically for my 2015 Chevy Silverado but should fit most standard cup holders. The bottle sits a little high but it doesn't tip over. I may add a version that has a higher top…
Print two of these for a Hydrapeak 32oz container. Each one will hold 20 3ml vials. At the end of the day, this was designed to solve a number of issues: Printing without supports Better vial clearances with or without vial labels Deeper…
There are a couple Owala bottle boot designs out there. I wasn't satisfied with any of them so I modelled one up with thinner walls, a chamfer on the bottom to help with printability and an optimal diameter. I have made 2 sizes to fit the…
I printed this to add some protection and grip to my Owala water bottle. I used Inland TPU, and the fit is perfect. No slippage, but easy to remove if and when needed. Quick specifications: inner diameter is 87mm interior fillet is 9mm to…
Should work for a left hand drive 2015-2020 Fit This is 6mm thick, which is probably way overkill. I imagine you could change to 3mm, and pick 4 outer walls in your slicer. That would give you 8 walls total and a very strong part. I…
This remixes a 32oz 80x80mm IPA holder for a pegboard (which is a remix of a smaller holder) and adds IKEA Skadis mounting pegs from the Fluke 87 V multi-meter holder. The mounting pegs are a bit tight. I clipped the corners to help them…
This is a blackout sleeve and cover for 32oz mason jars, for use with Kratky hydroponics. The sleeve blocks light to prevent algea growth. The sleeve fits loosely so the plant can be lifted out to check nutrient levels easily. The cover…
Easy to print Isopropyl Alcohol Bottle holder for the Multiboard system. Holds a 32 FL OZ Bottle using Multiconnect system by @DavidD
The original model is great except for where it actually bolts on the bike. I don't know about your bike but mine is made out of round tubes with little inserts in the tube to screw into. The flat surface that the original model has where…
Bottle sleeves for HydroFlask, ThermoFlask or similar double walled vaccuum sealed water bottles: 32 or 40oz. One version has a breather hole for easier installation. Printed in Overture TPU 0.2mm layer height 0.4mm stock nozzle
Inner dimensions are 81x81mm to account for some bulge, holds any bottle that is 80mm square and has chamfered edges.
My 32oz water bottle would not fit in the standard holders. When I removed them the bottle flopped around while driving. Now it sits snug and strait. The STEP file is included if you need to adjust the sketch to accommodate larger or…
A handle for Takeya/Thermoflask 32oz tumblers that are commonly found at Costco. It helps to put a single layer of gaff/duct/electrical tape on the inside of the ring to help it hold/grip to the tumbler (see photos) . Design may be…
This print is made from 95A Matter Hackers Pro Series TPU but I used some settings for Overture TPU. It has 10% Gyroid infill. The protective base adds a little bit of height and almost nothing to the diameter so it can still slide easily…
I just tried my hand at making some fermented hot sauces in a mason jar with an air lock. I don't have a good enclosed space for them, so they will live on my counter. I quickly made these covers for the jars to keep UV light off them…
I use the larger bottles of isopropyl to clean my build sheet. Seems fine printed in PLA, 20% infill. I've included two presliced profiles, one for Prusament PETG, and the other for generic PLA. These use 2.6 Alpha 3 Organic supports…
This Nalgene adaptor was designed for a Mitsubishi Colt drinks holder but should work in cars with a similarly dimensioned holder (75.5mm upper diameter, 72mm lower diameter and 55mm depth). The holder also has a hollow base to allow…
Remix of Rav4 Prime Hydroflask Holder by corbul0
This protection boot fits on a 32oz hydro flask widemouth bottle. Print instructions: vase mode (this is important) 0.7 wall thickness (this is important) 0.2 layer height 20 solid bottom layers (see in slicer preview to judge how much…
This clip on collar fixes a broken Zep Professional Sprayer 32oz Bottle nozzle and threaded collar interface. I printed it using Prusa PETG with 50% infill, gyroid fill pattern, supports everywhere, and placed it on the narrow top face…
My wife wanted us to stop using plastic drinking tumblers and straws, but I was unable to find any glass tumblers that held enough water. I drink a lot of water, so I wanted something that would hold at least 32oz. I found these 32oz…
My household has acquired more drinking vessels that do not fit the cupholders in my wife's car. This design fits the 32oz version of the Freesip, as well as any drinkware <75mm diamter in the lower section. Now that I think about it, I…
Cupholder adapters for the 3rd generation Toyota Tacoma designed to fit both the front and rear cupholders and hold your 32oz Nalgene bottle. The lower profile on the front cupholder model roughly matches a 24oz yeti, while the lower…
Modified this to fit 32oz Nalgene bottles. Added a chamfer so no support is needed.
A sleeve for 32oz yogurt containers (FAGE) intended to be used as a temporary bin while cleaning vegetables, tossing eggshells etc.
32oz Hydroflask adapter for 2016 VW Tiguan Cupholder . I included a custom support from original model in 3mf with 0.2mm gap modified for: sparse infill, no top, and no perimeter (break away was trivially easy). Made in Polymaker ASA…
I have used Hydro Flask and Coffee Mug MODULAR Car Cup Holder Adapter by strongcraig on Thingiverse for my full-sized hydroflask, but I needed something to stabilize my 32oz Trail Lightweight version (skinnier) so I created this insert…
The 32oz CamelBak Eddy+ insulated water bottle does not fit in some car cup holders, so this adapter sits in the cup holder and fits the water bottle on top. The cup holder part is 71.8mm in diameter at the bottom, sloping up to 83mm at…
My wife recently bought a container of yogurt, not realizing it was missing the resealable plastic lid. She brought this to my attention and demanded I whip up a solution to her problem, so… Here we are! A replacement lid for a 32oz…
Holder for Kaytee 32oz water bottle to hang on standard grid walls.
for ¼ gallon/32oz bottles "mine are MaxTite but other similar bottles fit as well" internal diameter 87.5mm. I also shortened up the original model, its got a pretty good grip on the bottom of the bottle so it didn't need to be near that…
a remix of a beer koozie for 32oz bottles\caguamas, print with fuzzy skin is best for grip and looks TPU and stagger the seams is nice
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/bEGoGUia5zG I made this as I got tired of it falling over in my cabinet. You can mount it to a wall or under a shelf. It holds the foam gun perfectly.…
Topper to fit the 32oz Hydro Flask-brand water bottle. Use with base(s): https://www.printables.com/model/943163-fisker-ocean-cup-holder-base-front-seats https://www.printables.com/model/943690-fisker-ocean-cup-holder-base-back-seats
I made this handle for my Ozark trails 32oz tumbler. it's secure with three 3m screws and heat inserts.
My Owala was dropped and dented on the edge so it did not sit flat. The rocking drove me crazy so I knew I needed to do something, either throw away the bottle or fix it. 3D printer to the rescue! I copied the dimensions provided in the…
Hello World! This is my first 3d print design. All it is: a desk mount to hold your 32oz bottle. Scale it up / down to fit your desk or feel free to take it and remix it. Enjoy!
The lady wants her coffee, we give her her coffee. Specifically sized and contoured to fit the (now discontinued??) 32oz. BrüMate Nav XL tumbler. They appear to now be selling it in redesigned 35oz. cups; I have not tested with those.…
Manna 32oz Bottle Replacement Handle After my daughter cracked the original handle to her Manna water bottle, I modeled a replacement. While I didn't have the original parts to go by, this is pretty close to the original geometry. I did…
Easy to print Isopropyl Alcohol Bottle holder for Muscle Rack. Holds a 32 FL OZ Bottle
Simple dust Cover for BBAXI 900ml melting pot (Amazon)
The lady wants her coffee, we give her her coffee. Specifically sized and contoured to fit the (now discontinued??) 32oz. BrüMate Nav XL tumbler. They appear to now be selling it in redesigned 35oz. cups; I have not tested with those.…
Cupholder adapters for the 3rd generation Toyota Tacoma designed to fit both the front and rear cupholders and hold your 32oz Nalgene bottle. The lower profile on the front cupholder model roughly matches a 24oz yeti, while the lower…
My Owala was dropped and dented on the edge so it did not sit flat. The rocking drove me crazy so I knew I needed to do something, either throw away the bottle or fix it. 3D printer to the rescue! I copied the dimensions provided in the…
All you need is a glass bowl & a 32oz Mason Jar Designed with interchangeable mouth pieces for when smoking with others. Make multiple for all your friends!
This is my first model, so please be nice with me. It was a pain for me to carry my Corksicle Canteen as it couldn't fit on the normal cup holders of my car, so I decided to modify an existing model. As it would live inside the car most…
For reference, the 32oz bottle has a diameter of 91mm. Print in TPU.
My mother needed a cupholder adapter to fit her 32oz bass pro water bottle. I quickly whipped this up. will probably fit other car style cup holders that can holder a standard 12oz can. designed specifically to holder a 32oz bass pro…
In order to laser engrave my yeti rambler, i needed something to hold it in place and be able to line up the text with the Yeti logo on the bottle so I created this jig. It sits in my Bambu Lab H2D perfectly and the 32oz rambler fits…
This is a 3D design of a multipurpose lid and cup coaster created for 32oz tumblers. The design is compatible with Lion Cups tumblers and is intended as an accessory, not a branded lid. It features a functional, minimalist structure that…
This is my design for a Hydroponic indoor planter that is made to fit any standard 32oz mason jar (you can buy on amazon or just about anywhere) Pretty simple design here that has worked great for me so far. I designed this so that it is…
This bottle holder is perfect for woodworkers who want to keep their Titebond glue primed and easily accessible. Gravity-fed/Upside-down docking: The internal cavity is precisely contoured to fit the tapered neck and cap of the bottle.…
This is an inside the cage bottle holder for the Kaytee brand 32oz Clear Water Bottle. I'm using it for our pet rats in a double critter nation. using the supplied spring clips was a PITA so this makes cleaning and refilling the bottle…
I needed a stable holder for my 32oz Hydroflask water bottle and Yeti coffee mug when driving my HMMWV. It is bolted directly to the vehicle using sheet metal screws. So far it is working very well.
This is an updated anti-theft version of the wall mount for my "Equate 34oz or Target 32oz Hand Sanitizer holder - Wall Mount Remix" which you can find at the link below: https://www.thingiverse.com/thing:4213018/files The bottle holder…
Update 4/10/2020: There is a new and improved version at the link below. It uses a small pen spring and a penny (or other small coin) to unlock it: https://www.thingiverse.com/thing:4276185 I will not be updating this design unless…
This is just a quick remix of my 32 Oz Hand Sanitizer Holder for Haworth Compose Cubicles (which is pictured to give an idea of what the completed holder looks like). This however is designed to be wall mounted. There are 2 versions of…
Update 3-10-2020: If you want a wall mount version, check out the remix here: https://www.thingiverse.com/thing:4213018 This is a remix of the original version of the "Equate 34oz or Target 32oz Hand Sanitizer holder for Haworth Compose…
Update 3-10-2020: If you want a wall mount version, check out the remix here: https://www.thingiverse.com/thing:4213018 I recommend using the remix'ed version - https://www.thingiverse.com/thing:4172411 - which is stronger and utilizes m3…
A little bit better version of my previous one. Supports required. I used 10% gyroid infill but it doesn't seem to matter what is used. Please post your makes! I'd love to see yours <3
