Counting matching models…
A parametric LED Matrix diffusor front plate. fullcontrolXYZ based, 100%extrusion, 0 travel, 0 retractions. Extrudes at 0.8mm, which is totally fine for a 0.4nozzle. A bigger nozzle will probably allow much faster print speeds. Prints as…
32x32 LED Matrix Frame No glue*, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector for easy installation Optional socket-less version *…
Hello Makers, i wanted a bigger LED matrix with 32x32 LEDs. So i looked for a nice picture frame that fits also for the depth. I found a good & cheap one on IKEA. On Youtube there are lots of tutorials to build a 32x32 matrix out of four…
remake of another model. Added features. Dimensions 170mm x 170mm x 5mm (L x W x H) excluding dovetail counter-sunk m3 holes parts clearance (0.8mm) Features parts clearance dove tail for connecting the four pieces small inlet for the PCB…
Matrix 32x32 for 4 pieces of 32x8 NeoPixel LED matrices giving you 1024 single controllable LEDs for lots of projects. =) The project can be created completely solder free with the use of some WAGO clamps. You will need a large printer…
This enclosure was inspired from the Adafruit version that supported a different MCU, but I specifically needed to use the MatrixPortal S3 for WLED-MoonModules compatibility. I also compensated for using 0.75mm thick LCD diffuser plastic…
This is a Go Pro compatible mount for AOS Frames with M3 32x32mm moutings. Print with >50% infill in TPU.
Just a simple case for two motor speed controllers 32x32mm with a central potentiometer.
This is a case for the KAYETON 120 fps camera that can be found on AliExpress . The top snaps into the bottom with a snap fit bump and has optional screw holes in the bottom for m1 hex screws. The case can hold itself closed mostly fine…
Customized version of http://www.thingiverse.com/thing:137543 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=137543 Instructions Using the following options: font_depth = 1.5 factors_y = 32 factors_x = 32…
I made these so I don't impale myself on the sharp corners as I am using the shelving as a bench top. I think these shelves are sold under a lot of brand names or at least very similar ones are sold are so these may work for you as long…
Pata de gato para cuadrados de metal ideal para mesas y sillas, escalable
These are mounts to fit the 32x32 RGB LED matrix panel from Sparkfun( https://www.sparkfun.com/products/14646 ) into the 10x10 shadowbox from Michaels( https://www.michaels.com/black-extra-deep-shadowbox-10x10-studio-decor/10229048.html )…
I made these so I don't impale myself on the sharp corners as I am using the shelving as a bench top. I think these shelves are sold under a lot of brand names or at least very similar ones are sold are so these may work for you as long…
Single part printable 32x32 pixel art frame. Printed on Ender5 plus (merc1) Pixel foils used were 8x32 that we cheap on Aliexpress. Foils attached to front mask using 6mm double foam tape. central 5v power used and daisy chained to all 4…
Grid for 32x32 Pixelmatrix 6mm pitch. Panel: IFH6-32x32-16S ADA1484 Fits in IKEA Ribba 23x23cm Pictureframe. http://www.ikea.com/de/de/catalog/products/00378403/ Has a front hole for IR-Sensor. For: http://docs.pixelmatix.com/SmartMatrix/…
Grid for 32x32 Pixelmatrix 6mm pitch. Panel: IFH6-32x32-16S ADA1484 For: http://docs.pixelmatix.com/SmartMatrix/smartmatrix-assembly.html Category: DIY
