7 models
A PSU Fan cover/silencer for the Creality Ender 3 Pro / Meanwell LRS-350-24 PSU This model was designed to print the models separately in different colors and fit the embossed letters into the debossed fan cover. If the embossed “GHOST”…
My adapter broke at the beginning of the heating season due to a stiff shaft. I replaced it with this print and so far it's working fine. Printed with ABS+ No support necessary. For bridging there is a disc at the bottom of the screw hole…
Hello! This model will allow you to use an 18mm NATO strap of your choice with your Casio 3502 watch. While it does stick out from your wrist more, I find it to be much more comfortable than the stock strap. Installation Instructions: 1)…
Disclaimer: Photo looks slightly off as the gasket paper came from a roll, it was cut held down flat but has a tendency to bow when resting as it is in that photo Custom gasket for the BBK 3502 throttle body as the one BBK Sells (Part…
For mounting in a square tube: Minimum 58x58 mm Maximum 60x60mm Foot thickness: 22.5mm Made for a school project.
gedruckt in: TPU 95A Perimeter 4 Fülldichte 50% - 80% Füllmuster Gitternetz keine Stützen Version 1 mit glatte Oberfläche Version 2 mit Quadratischem Muster
external perimeters extrusion width = 0.42mm ; perimeters extrusion width = 0.60mm ; infill extrusion width = 0.80mm ; solid infill extrusion width = 0.60mm ; top infill extrusion width = 0.60mm ; support material extrusion width = 0.42mm…
