Oil Filter Wrench John Deere Z335E
Oil Filter Wrench John Deere Z335E. 15 facet x 72mm for a nice tight fit. 3/8" drive. Designed in FreeCAD. Ender 3 v2, Generic ABS, 0.4mm nozzle, 0.2mm Layer height.
- Downloads
- 92
- Likes
- 12
- Rating
- 0
14 models
Oil Filter Wrench John Deere Z335E. 15 facet x 72mm for a nice tight fit. 3/8" drive. Designed in FreeCAD. Ender 3 v2, Generic ABS, 0.4mm nozzle, 0.2mm Layer height.
Caster bushing for John Deere Z335E. (not yet tested in place) Created in FreeCAD. Ender 3 v2, Generic PLA, 0.4mm nozzle, 0.2mm Layer height.
Gehäuse für die Funkfernbedienung am Chamberlain Garagentor. Ist für die alte Version mit 433 Mhz, ob es für neueren Versionen passt kann ich nicht sagen. Wenn ja, dann bitte Rückinfo ;-) Die Knöpfe sollten vor der Montage noch ein wenig…
I had previously printed the AIO case linked when I built my Ender Extender, but it uses the original Ender display mount. This does not allow access to the ports on the side of the TFT. After some playing around I have the mixed pieces…
Push in Diameter 32,7mm, Outer Diameter 36mm. Print & Scale for press fit. Push in Diameter 32,7mm, Outer Diameter 36mm Vent Hole should avoid popping out of cap Inner Cone for limiting Support Material. Update 03/30/25 made my first…
Simple Tool to press in the Seal for Yamaha 34X 34Y 53V 35E 1HR 2AJ DT 80/125 LC 2 Forks (36mm). printed from PETG use ≥ 8 Bottom Layers (Hammer Side), ~5-6 Top-Layers (Seal Side) infill > 25% First Print worked up to two fork Sets (4…
Remix of the design, I removed the plug cavities on the back and added holes for direct wiring. I removed the fan on the top. I removed the Ender logo from the front and added a grill for front to back flow. There are two left side…
The metal nut for the rewind knob started to slip, which gave me a hard time rewinding the film. Tried my best to replicate the original. No supports needed Printed default voron 0.2 0.15mm profile
DT 125 LC 10V 35E Motorshield Rubber Pad (sorry, no better Name…), to fit left and right inside of the plastic Motor Shield. Not printed yet, still to test in TPU.
Simple Tool to press in the upper Bearing/Bush for Yamaha 34X 34Y 53V 35E 1HR 2AJ DT 80/125 LC 2 Forks (36mm). printed from PETG printed from PETG use ≥ 8 Bottom Layers (Hammer Side), ~5-6 Top-Layers (Seal Side) infill 25 - 30% slides…
Tool to help make the removal of oil filter easier on John Deere Z335e zero turn mower
while rebuilding my DT, i could not find this part, even the Yamaha Spare parts lists didn't show anything. So maybe something in the Design has changed for the Headlight fixture. This is the Grommet for the rectangular cut out of the…
Side button for Babyliss 2735e attachments
Yamaha 34X 34Y 53V 35E 1HR 2AJ DT 80/125 LC 2 Chain Roll. 34X 53V ChainRollerStd: Simple Cylinder Roll for Standard Plastic bushing. Easy fit. Printed from TPU, 30% Infill, 4-6 Walls. Place chamfered end to collar side of bush. 34X 53V…