Counting matching models…
Print with the flat part of the grip on the print bed with supports. I used a threshold angle of 10 degrees with snug supports! Feel free to get this directly from me here: https://dildesigns3d.etsy.com
Print this with the top side of the clip down. I printed with supports with a 10% support angle threshold. You shouldn't need a brim depending on your plate, but I printed previous versions with a brim just to be sure! Feel free to get…
In collaboration with HyperPlay RPG , I have designed a grip for the RG35XX H games console. Print with supports 15% infill 0.2 mm layer height See HyperPlay RGP's review of the grip here: I also sell this on my website and Etsy store ,…
Feel free to use this to develop your own accessories!
Print in TPU with supports nice and slow with the flat side down! I used a 10% support threshold. If you want to buy this from me or want to support me, follow this link here: https://dildesigns3d.etsy.com
A simple model to fill the holes left when analog sticks are removed. They snap in and sit flush with the front of the device. Check out my profile for versions for the RGB30 and RP2S. Originally tested in PLA, 0.2 layer height, 100%…
Thinner version of https://www.printables.com/model/829340-anbernic-rg35xxh-bumper-case with cutout in the back.
Mostly accurate reference model for the Anbernic RG35XXH.
I made a stand for my Anbernic RG35XXH its super simple but works and should be a pretty quick print.
Just some additions to make this great model printable at a 45 degree angle to avoid any support scarring on the handles
I found that i kept pressing the reset button by accident, so I wanted something that would sit around the reset button to stop it from being pressed, but still have a hole so that the reset button is accessible via any SIM card needle.…
I found that i kept pressing the reset button by accident, so I wanted something that would sit around the reset button to stop it from being pressed, but still have a hole so that the reset button is accessible via any SIM card needle.…
I made a stand for my Anbernic RG35XXH its super simple but works and should be a pretty quick print.
