Counting matching models…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Mini C3PO Figurine Printed Black. Painted gold. Printed with fuzzy skin effect. Fuzzy Skin: Contour Fuzzy Skin Point Distance: 0.15 Fuzzy Skin thickness: 0.15 If you're interested in the commercial use of my models, check the link to my…
A remix of the dummy 13 head. Just wanted to add another head option. Enjoy C3PO.
This is the droid you're looking for! Minimal C-3PO skin for Soozafone's fantastic Lucky 13 armature. Remixed from the original Lucky 13 skin files in 3ds Max and Zbrush. No supports needed, but the head is a two-part print. Use CA glue…
Add a galactic twist to your holiday decor with this pack of Star Wars-themed Christmas ornaments. Featuring iconic characters like , Yoda, R2-D2 and C3PO, these 3D models are perfect for creating unique and personalized ornaments. Each…
I have 2 & half incomplete full size R2D2's and of course you can't have them with out R2's favorite side kick C3PO. Started the head thus far and will up load more files of the body as time permits, Cheers Jace 1/06/2017 Just started to…
This is a set of blocks that can be used to recreate a C-3PO figure at 500% scale. This figure was introduced as part of the Death Star set released in 2016 and was included in 11 more sets between 2016 - 2021. All of the stl files needed…
Based on DUMMY 13 Beta DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 Get your Dummy 13 here: /model/593185 DUMMY 13 loves COMIC CON! So I have started to design a whole series of characters and…
Description C-3PO, often referred to simply as Threepio, is a fictional humanoid protocol droid in the Star Wars universe. Created by the brilliant Anakin Skywalker, later known as Darth Vader, C-3PO is designed to facilitate…
Real quick: Check out my other S22 designs like my LED handle/boomerangs , help me spread my design by hitting the like button , post a photo as a make once you've printed things out!! There's an active community on this, come: join the…
Simple remix of a perfect model, deleted antenna, added ring for hanging. If I already have the gold filament, it would be a shame not to use it.. thank You very much https://www.printables.com/cs/social/80-jace1969/about ** Jednoduchý…
Need a flawless 3d print of this? Visit https://muckychris.com/collections/buddhas introducing the Original Muckychris 3D Printed Pop-Culture Buddha Statue: A Fusion of Art, Technology, and Nostalgia. Celebrating more than 15 years of the…
A simple mini of C-3PO, no AMS needed and with very little assembly is necessary. The geometry is full of details that a 80 mm figurine cant really show with FDM printing, so if you decide to scale it up, it should look even more…
I am C-3PO, human/cyborg relations. And you are? Introducing the first member of the springie Star Wars series, C3PO springie. A fun and awesome little bobble head of the iconic, and melodramatic Star Wars droid. 27-03-2023: Updated the…
Print in place Droid that moves when you pull the bottom “zipper” This model prints in place and no assembly is required. You can also do a simple color change in a certain height to get a visually interesting effect and nice contrast.…
A lone figure stands in silence, golden plating reflecting the fading light of a galaxy he has spent a lifetime traversing. This is no moment of protocol or translation… only C-3PO at rest, carrying memories of countless worlds,…
These are parts I have created to add on to Jesse M's 3D printed head of C-3PO and modified by Gordon Tarpley. You can find their models on Thingiverse. You can add these files to the head they modelled and create an animated C-3PO. All…
I remixed this low poly C-3PO to have some CHEEKS! It was inspired by Chris Pirillo's twitch emote! Needed no supports on my ender 3 Max. Remixed from: https://www.thingiverse.com/thing:2485031
C3PO Christmas Tree Decoration is a 3D printable model that lets you create your own festive and fun ornament for the holiday season. It is inspired by C3PO, the iconic protocol droid from Star Wars. It features a detailed and realistic…
STAR WARS LEGO C3PO PIGGY BANK: Subscribe now so you don't miss the next creations! Take the head of the LEGO C3PO figure and turn it into a piggy bank. Simple opening. Height: 126mm Width: 95mm Slot size: 2,65 X 27,5 mm UNSUPPORTED…
A bit obscure but here we go: Printed a C3PO helmet at 110%. Didn't fit my head despite measuring twice, decided to make it my version of the decapitated 3PO head from ESB. Went looking for inspiration & found this - […
Add a touch of droid sophistication to your neckerchief with this sleek C-3PO woggle!
this is a star wars coaster I have created a complete series of coasters about star wars don't forget to see the rest of the models and leave a like thank you CUB SOCIOS: https://www.printables.com/@tecnoculebras#join:484 PATREON:…
"Stormtroopers? Here? We're in danger! I must tell the others! Oh, no I've been shot!" This is a model of LEGO C-3PO on Chewbacca's back. I hope you enjoy it as much as I enjoyed making it. 4/27/23 UPDATE: I added a new file because the…
A simple keychain made from the head of C-3PO
C-3PO, the golden protocol droid, had an insatiable fascination with the stars. He would steal away to a secluded spot on their ship, gazing into the night sky with awe and wonder. The stars, to him, held countless stories and secrets,…
I wanted to be able to hang this on a a hook or pegboard in my garage. Also added a bevel to replace a small overhang. Checked the volume and weight on my kitchen scale, this will hold 4 oz, or 114 gms/mls, if filled to the very top. I…
this is a star wars coaster I have created a complete series of coasters about star wars don't forget to see the rest of the models and leave a like thank you CUB SOCIOS: https://www.printables.com/@tecnoculebras#join:484 PATREON:…
C-3POctopus has 8 legs, 9 brains and is fluent in over six million forms of communication! suggest to scale up a bit as the neck is weak. use tree supports for the head Need a C-3PO Duck?…
Off-Duty in the Outer Rim Collection Master Luthier C3PO at Willow Wood Worshop Widely known in the outer rim for his pristine soprano and baritone ukuleles. Its also an ice cream shop.
Print settings: material: PETG 0,25 layer Prusament JetBlack
Ne trouvant pas ce modèle sur le net je l'ai réalisé pour un buste de C3PO 40 mm Not finding this model on the net I made it for a bust of C3PO 40 mm
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Orange Transmission…
Simple C3PO Snowflake Ornament with a 2mm hole to add a hook and is about 4mm thick and 110mm in diameter
Printing recommendations: 3 walls 10-15% infill 0.20 layer height Dimensions: 38.77 x 49.33 x 59.38 Can be reduced to 75% of its size to make it the right size for a keyring. Can be printed with PLA, ABS, PETG, TPU, etc. We recommend…
This is a 2, 3, and 4-pole connector. The inner diameter is 12.7 mm ( 0.5 inch). It is used in folding wardrobes. You can print with 30 % fillings, which provides high-quality support. This is suitable for a half-inch ( 12.7 mm) round…
A new 3D figurine generated by AI, a The C3PO Thinker. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the camera…
I wanted to print it on a resin printer, so I hollowed it out and put drainage spouts to prevent cups. Category: Sculptures
These are replacement eyes for the Jakks Pacific 31 inch C3PO. Print ‘eye back’s in yellow filament. note the 3 holes in the back of each eye for 3mm leds. paint the middle indent black. print ‘eye front’s (any filament/ colour) and paint…
The original design works fine, but it had too much side wobble, on my head at least. But since I really like the simplicity of this design over some other more complex and heavier structures I found, I had a similar simple approach to…
Add a galactic twist to your holiday decor with this pack of Star Wars-themed Christmas ornaments. Featuring iconic characters like , Yoda, R2-D2 and C3PO, these 3D models are perfect for creating unique and personalized ornaments. Each…
A great Wall Art of a C3PO Wall Art. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-)
Thank the maker! The C3PO helmet is now available! Our goal with this helmet was to make a more accessible version of the C3PO head. Other designs are based on the original movie prop where the wearer had to be clamped in by someone else…
Little Star Warrior #02 - C3PO … In a Galaxy, Far Far away … anbei der erste Star Warrior aus meiner neuen Serie, erstellet mit PrintMon. Die Datei enthält nur eine Uni Farb Modell, da mir leider noch die Zeit fehlt, diese mit leben zu…
Printed in normal 0.2 settings, with the beautiful Prusa Bronze filament. Mandatory: 0.2 layer (designed for it), 04 noozle. No support (they are built-in), no brim, except for the screws. Print parts, remove supports below ball joints…
Keychain of C-3PO—golden, elegant, and delightfully dramatic, just like your favorite protocol droid.
I really love the art style from the original 2003 Clone Wars series, so tried to capture the vibe in this drawing. The design prints face down on the build plate to get the texture, 4 colours so would work with an AMS or MMU.
Description hey C-3PO Helmet Clip for Vertical Hangers This 3D-printable C-3PO helmet functions as a stylish clip that easily attaches to the vertical part of a hanger hook, adding a cool Star Wars flair to your wardrobe or room.…
Easy to Print 160mm x 220mm, 2mm thick. Printed on a P1S 3MF file included. Print Profile that I used. For multi extruder printer, split into parts then select the parts for the second colour (first part in normally the base colour layer,…
Features of Our Models: 10x Scale: An imposing size that gives the figure excellent display presence. No Painting Required: Designed to look complete when printed in colored filament. Fully Articulated and Disassemblable: Just like a…
A great Wall Art of a C3PO Wall Art. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-)
Transform your 3D printer into a gateway to a galaxy far, far away with this incredible STL model that merges the beloved protocol droid with classic bath time charm. This meticulously detailed figurine showcases C-3PO's iconic golden…
Bring the golden protocol droid's iconic charm to life with this stunning 3D printable bust that captures every intricate detail of the beloved Star Wars character. This meticulously crafted STL model showcases the distinctive dome head,…
For Star Wars fans decorate the fridge or whatever you want. Contains a hole to insert a 6x3 magnet. Category: Decor
What more could you want than to add CP3O to your Droid models, Cheers Jace This is an untested print so please check you are happy with the file before attempting to print,
With All the other Characters I couldn't leave out this fella out. I had to include him in amongst the wall art plaques ; ) Cheers Jace
With taking on R2D2 as a build project, what more could you want than to have this fellow standing along side : ) An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10…
This tap handle fits perfectly on a standard 3/8"-16 UNC screw, thanks to the base of the model from Florian's Skull Beer Tap Handle . The C3PO model is made by TheHappyOne and is available on Thingiverse. I printed in PLA on a Flashforge…
Replacement quick release plate for 3Pod 3PVHQ3 tripod head. Required Additional Parts TPU printing capabilities for anti slide insert or SAE O-Ring size AS568-113 or metric 2.5x14mm. 1: ¼"-20 or 3/8"-16 x ½-5/8" pan head bolt for…
My sons new C-3PO costume Parts 1-3 of ? ;) Today i have start make a new costume for my youngest boy. My plan is to finish before he be 3-4 year old. ;) I have remake a costume before for older boy when he was 10 year old. That costume…
In this project i make my boys new c3po costume and i use only thinkercad and 3 shapes. With 3 shapes you can do much fun if you understand how the tools working. ;) I still miss 360!! but this is my own challenge to use only tinkercad to…
C3PO Z-Axis knob for Ender 3 This is a merge of two designs from two different thingiverse designers. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Yes Supports: No Resolution: 200 Infill: 38 Filament: Any PLA Any Notes:…
Algunos lowpoly fueron remix, otros de diseño propio, añadí una tecla que es perfecta en lowpoly para que combinara con los diseños existentes, fueron impresos en una Ender 3 S1, recomiendo poner balsa para que el alojamiento de la tecla…
I have revised the magnet. I have added two magnets. These are no longer glued but printed. The printer pauses so that you can insert the magnet. The magnets have a diameter of 6 mm and are 3 mm thick. I have also added a color change.…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
This is a headphone stand with C3PO from Star Wars, it's a model that is fun and powerful at the same time. This headphone stand comes in 2 parts, the actual stand with the figure and then the headphones holder to slide onto it and can be…
I make this mask for my boy C3po Costume. Its fits on his head but not fits all heads. If some use this mask is most remakes for the heads and air holes. My boys get to sweaty and wet inside this mask so you most fix more air holes. Is…
C-3PO low poly model has been added to my collection. I plan to add more of my favorite characters so check regularly for updates. Boba Fett (Mandalorian) https://www.thingiverse.com/thing:3972666 Leave a like if you Like it! Print…
Filament: PLA or PETG 0.2mm nozzle 0.08mm layer 4 walls 15% infill
Use the latest version of Orca Slicer and load the project which, will already have the pieces on plates with the correct colors and settings. This is done in 2 prints and then the C3PO is carefully put into the background piece. It is…
Full size C-3PO hands. These have been modeled from scratch with the 3D Scans provided by TheHappyOne as reference. https://www.thingiverse.com/thing:2776877 They go great with the other parts designed by Jesse_M…
used a picture as a reference to create. artist credit: Markus Jansson
A great Wall Art of C-3PO. Do not forget to upload your makes, thanks ! Inspired by a sticker
