13 models
Connect BOSCH PEX400AE to FESTOOL CT17 44mm vacuum hose. Self locking on sander.
Print approx. €2.66–€3.25 excl. taxPreliminary estimate for PETGSource material: PET
bought the following LMT-6: https://www.lehner-shop.com/zubehoer/hochstromstecksystem-400-a.html They are very high quality and for max 400A. Wire: philippi h07bq-f 3x2.5 I created blind plugs for transport so that the threads and…
A easy to print mount for the Phanteks P400A (might work with other Phanteks cases) No supports needed, use original screws from the case and route the cables from the Fans on the front. disclaimer: might not fit exactly as I made this a…
This print replaces the plastic intensity knobs on the old Coleman two burner propane camping stove. Unscrew the screw from the metal stalk, remove it and the thin circular metal "Off" plate if you still have it. Put the plate into the…
Cooler assembly for Zendure 2400AC plugin Battery using 2 140mm computer fans. Powered by the cooler exit on the inverter using a selfmade connector. All printed on Ender3v2 in eSun PETG-HS Parts needed: 2 x Fan 140mm 12v 8 x M4x35mm bolt…
Print two. A hose clamp will hold them together, so the seam only needs glue or tape to seal. Fitting the duct on is very snug. Made with 0.4mm increments in mind for 0.4mm layer heights.
An adapter that enables the Bosch POF1400ACE to be used on/with the FSN rails. It uses an amended version of HAMMER_T's baseplate which was adapted to be screwed onto the rail guide. The rail guide is unchanged Rail_Adapter.stl from…
It is a model of Steyr 1400a in scale 1:43. It is easy and fun to build. Instruction for build : For axels,exhaust i used a 1,2mm iron rod and for the hydraulic i used a 1mm iron rod or you can use a nail :D. Everything was glued together…
This model is a cover for the inside of the pc case of the series Phantek P400, P400a and P400i. they may also work on som other versions of phanteks cases, but unknown which. The cover is ment for hiding away some holes that can be used…
I created this model to connect my Miele (S4211, I think the Miele hose connection is generic) vacuum hose directly to my Bosch PEX400AE sander. It fits very securely and works great, when I use this almost no sanding dust is coming off…
Made a simple mounting base for DC circuit breaker used in PV installations and energy storage systems Link to aliexpress: https://pl.aliexpress.com/item/1005006149911452.html
Replacement gasket designed specifically for the Amana dishwasher (Model ADB1400AGW1, Type 583-0). This model replaces worn or degraded factory seals to restore a watertight fit. The geometry is optimized for TPU to ensure proper…
I created this model to connect my Miele (S4211, I think the Miele hose connection is generic) vacuum hose directly to my Bosch PEX400AE sander. It fits very securely and works great, when I use this almost no sanding dust is coming off…
