Counting matching models…
Lates update 27/07/25 Three air outlets (beta): a central duct has been added to complement the two classic side outlets, providing direct cooling to the nozzle and improved wraparound airflow on the printed part. Designed exclusively for…
4028 Mount for VzBot F3d Racing RatRig CNC'd aluminum Print Head. 2 version, M3 nuts or M3 Heatset Inserts BOM: 6 x M3 nuts or M3 Heatset Inserts 4 x M3x35mm Bolts 2 x M3x25mm Bolts 2 x M3x10mm Bolts 1 x M3x8mm Bolt + M3 Nut/Heat Insert…
Made this mod for the blower as i didn't like the height of the original when first assembling my VC3. Been using and testing my original test model for several months now and has been working well so decided to finally share. This model…
CPAP adapters for fan 4028 4020 4010
***Update Jan 23, 2024*** Added horns to mount Beacon Rev H ***Update 09/26/23*** Revised bottom horns cleaned up the model slightly This is my mod of the EVA3 mount for orbiter2 and rapido, to add support for a Beacon and ebb42…
It is a first iteration and not tested yet. I will appreciate any comments which can help further modifications. The goal was to make a new inlet fan model for 4028mm fan without any integration to Eva 3. The fan inlet is designed to be…
8/14/2024 I just finished upgrading my RatRig, and have made a few EVA 3 modifications. It was designed in the following Onshape document, which was copied from the EVA page. I've also copied the mesh files to Github, Thingiverse, and…
This is a remixed variant of the fastener presented by RPK3D ( https://www.printables.com/model/420447-eva3-4028-fan-inlet-shorter-version ), but is located underneath the 4028 fan. I had to do so because I need more clearance for the…
If you are using: a 4028 part cooling fan Squirrelbrain's FBS/Narrow EVA3 mod Then you need this fan duct, especially if using an x-axis dragchain like Squirrelbrain's mod for the RatRig V-Minion. UPDATE: I've added a seal that you can…
Remix to avoid collision with the BMG extruder and the 4028 fan. Made with Blender. Needs to be printed on support!
Hi, I've created mod for V-minion - which is replacing 6mm belt with 10mm belt. New X motor cage also fixes issue with X endstop - EVA3. I also decided to change air duct of 4028 fan - just for better looking. Additionally - X idler - 3d…
print without support use 4pcs M3 heat inserts
Fan inlet with holes for threaded inserts. Compatible with EBB42 rear mount: https://www.printables.com/model/621410-ebb42-mount-for-v-core-31-200-with-eva3-and-orbite
Why? I'm sure your first question is why ? Isn't the stock single 4028 inlet enough? From a purely functional stand point, I believe it is, yes. However, it also has the potential to be extremely noisy. The 4028 fans default (fail) to…
This is a mod of SuperSniffle's 4028 Backplate for the EVA carriage system . All credit goes to SuperSniffles, for the original model, and Pawel Kucmus, for his awesome work on the EVA system. I simply modded the original file to fit…
This is a mod of a mod. Credit goes to MFBS and Pry, for all of their work. Modded the backplate to fit cartesian printers, such as the RatRig V-minion. This backplate fits MFBS's Gaping Maw mod . Check that page, along with Pry's page…
Inspired by 247zero beta1, this auxiliary fan unit is guaranteed to destroy your eardrum. Has a smooth interior instead of 247zero's square shaped hole. Ideally print with 2 outer walls and use a height range modifier to change the first…
Just added a small support where the fan duct splits to keep it from breaking too easily.
The back has a 9mm belt and a built-in 4028 fan. The MiniAB board is used as a switching board.
Print with supports. Edited in FreeCad. You can edit hole dimensions for any other switch.
Needs four M3, 3*4*5 heatset nuts
This is a quick remix of a buck converter mount that lets you mount a buck converter to a 4028 fan
Hi, I made new bottom part for RSCS vz235 to support 4028 fan mount. Fits perfectly to CNC bed support. 4028 generate much more air than 7530 and are easier to source. You will need 4x 30mm m3 screws. No heat inserts. Do not have to use…
this is a remix of strudster side intake for the c64x case i moddified it to mount dual 4028 server fans to get air into the c64x case cant use his drive cage with this remix as fans are too big
Prepare 2 or 4 heatset nuts (3*4*5)
I wanted to use ferrules on the hotend wires and needed a 4028 intake grille that would allow the ferrules not to rub. use the v-core 4 printing settings. Print Settings: Perimeters: 4 Line Width: 0.45mm Layer height: 0.2 - 0.3 mm Infill:…
Exactly what it says. I originally made it because I thought a fan was getting squeezed by the stock mount but it was just dying. I didn't even use it, but someone might need it so here it is. Add 4 heatsets and 4 screws of appropriate…
Built in the true RepRap spirit of continuous development, this custom toolhead for the Bugbu printer ecosystem is engineered for absolute reliability, precision, and high-speed performance. This design completely replaces the traditional…
Print with supports. Edited in FreeCad. You can edit hole dimensions for any other switch.
Most instructions etc in the “Extractor #2” text file. It's a housing to put a small PC/server fan inline in 32mm pool hose for use in extracting fumes from a printer cabinet or solder hood.
This mold will allow you to create a gasket for the 4028 fan. Use M3x10mm bolts/nuts to secure the 2 parts together. By doing so 2 holes will remain. on 1 end insert a syringe, I used a 20ml syringe for this. simply mix up your silicon,…
Made for my VCore 3.1 500 I really liked the original wire guide, but I wanted a built in mount for the 1mm piano wire. I also trimmed the front of it so it would no longer have interference with my short 4028 fan duct. No other changes.…
