38 models
READ INSTRUCTIONS: I see a lot of the prints and you guys area printing it in the wrong orientation. It's much stronger if you print it with the Holder orientated how it would be when you use it. UPDATE: Added Glock 43x Needed a place to…
It works on OEM and S15 mags. I take no liability as this was just a fun project and should be a stepping stone for anyone that is considering a magwell.
Simple little plug for the grip of the Glock 43x. Not much to it. Just follow the instructions. How Too. Print, in PETG, but pay attention to the way it sits on the print table in your slicers. You must help it. Look at photo. It should…
The source marked this model as adult content.
A simple 5 pos jig for stainless tag 43mm*24 XCS xtool file for template.
I added a "ring" so I can tie to something (Instead of drilling the handle)
Custom tire for lego wheel disk. Size of disk is 43x26mm. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2 layer height, 0.8mm nozzle Infill: 0% Filament: PM TPE Black Notes: Printed with 0%…
These are my first ever models, so please provide feedback. Forgive the poor line adhesion that can be seen on the completed item. I was testing a higher print speed, and it didn't come out great there in the middle. I wanted to clean up…
This is a remix of QuadView's G43x Magazine Rack, but adjusted to mount on the HSW. Everything else is faithful to the original. It holds up to 5 G43x magazines. Infill probably doesn't need to be as intense as I used. Print Settings:…
Bonsai pot 24 rectangular ornaments 213x143x50mm, no support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is…
Authors Note: Please store any and all firearms safely and responsibly. This is not a firearm part, and is just a neat way to store your firearm provided you have a secure and safe area/living arrangement to keep them in this manner. This…
Recommend to print with minimum 30-50% infill as you will be putting it in a vice. Or you could up the wall count a few as well. I printed mine with 2 walls and 10% infill on accident and it held up better than I thought. Heard a small…
adapted the size to fit a 43x50mm powerstrip
I made this tray because I did not have space where to store my PCB's before and after assembly. You can store PCB in panel or single PCB and you can stack them if you need. Is easy to print, without supports. Print instructions Printer…
Abschluss-Kappen d43xD45 -14-4
Glock 43x magazine holder for Multiboard. Uses “moderate weight-bearing snaps”. Disclaimer I have not printed or tested this yet. Do not waste your filament!
The source marked this model as adult content.
Designed this so I could carry my extra G43X magazine on my belt. I have not printed this yet, just some test pieces. Theoretically, it should work, but I'll update with other instructions when I can print it. Added bad picture of my two…
Pohotovostní stojan na G43X. Jeden zásobník na levou ruku pro rychlé nabití..
A remix of "Glock_Magazine_Loader_V1.6" that I brought into SolidWorks to fit my brother's PSA micro dagger mags. I cannot find the page for the original anymore (I got it off thingiverse in 2020 before they purged a lot of parts), so I…
Prévoir vis M5 ou M6 longueur 20mm avec écrou. You need 1 screw M5 or M6 lenght 20mm with a nut.
Hello, Today I have an extension cord holder for you. It is suitable if you want the extension cord to stay in one place. It holds really well, but you can still take it out and put it back in without having to loosen the screw. For…
There is two styles of the end caps.
Very easy to print: 0.4 nozzle works best; 0.2, 0.6, and 0.8 should also work. Layer height: 0.2 mm Infill is not needed when printing with a 0.4 nozzle or larger. If you print with a 0.2 nozzle, set infill to 100% If you like it, please…
added four mounting holes to design to mount the box on a flat surface Category: Containers
Created this model because i couldn't find anyone who had made one. i didn't want to pay $30 for a mounting plate. Feel free to do whatever you want with the model
Uses 4 M2 12mm hex socket screws to secure the lid. Print with snug normal supports.
it's to hang TH05 temp sensor 43x43x10mm in to Schneider Electric It isn't covering any sensor. It's easy to print. It's easy to remove. For more please suport.
This is made to be compatible with, those EuroBox Organizers: For the bigger 60x40 KLTs:
Deckel mit M43 x 0,75 Gewinde zum Aufschrauben auf Objektive mit entsprechendem Gewinde. Zwei verschiedene Ausführungen. Den Teil mit dem Gewinde mit der niedrigst möglichen Layerhöhe drucken. .................................... Cap with…
I needed a cover for my Samsung laser printer to keep dust out of the inner workings and went through 2-3 iterations to get this to fit and cut down filament use and print time. I have included the STL files for the 4 parts that I…
Glock 43x magazine holder for Multiboard. Uses “moderate weight-bearing snaps”. Disclaimer I have not printed or tested this yet. Do not waste your filament!
Uses 4 M2 12mm hex socket screws to secure the lid. Print with snug normal supports.
DD43 rail compatible Base CAD file extracted for free from Odysee. The entire exterior design of this part has been modified with many hours of CAD work, adding new structural geometries to make it stronger for 3d printing and to give the…
