Counting matching models…
3D Printable Caddies that you can use to adapt the 3 ½" storage bays of a 45Drives Storinator (AV15, Q30, S45 or XL60) or 45Drives Homelab HL15 server to accommodate a standard 2 ½" 7mm SSD or 2 ½" 15mm SSD. You'll want to use these M3 x…
This is a 3D Printable SSD mounting bracket that is compatible with 45Drives Storinator servers (except those which feature boot drive backplanes). This was shown off in Techno Tim's video here: This is compatible with the 45Drives HL15…
Here are all of the 3D Printed parts that come stock on the 45Drives HL15 server. If you need spares, or want to print your own, go to town. We recommend using PETG with at least 20% infill for these parts. PLA will likely soften at…
A better SSD holder for 45Drives chassis that allows for airflow. Needs threaded heat inserts like https://www.mcmaster.com/93365A132/ and matching screws. When mounting, make sure the arrows point toward the middle.
This will allow you to mount a 120 mm fan above your PCI slots for extra cooling. I use a 2mm bolt to attach the bracket to the case as that is about the size of the slots on the case. The bracket will accommodated a fastener that is up…
Reworked 45Drives drive caddy for 9mm SSD drives. Also widened the screwdriver channel for wider shaft screwdrivers.
Remixed SSD caddie by 45Drives. I have simply removed top and bottom layers. I used 2 walls and 10% infill (Adaptive Cubic) It passed my kids test (tossing against the floor and walls), I can also stand on it (laying flat). All these…
Remix of the original 45 Drives SSD mounting bracket to use M3x5.7mm heat set inserts instead of 6-32.
I wanted to add additional U.2 SSDs and could not find an existing model that was what I wanted. Designed from scratch using the 45Drives model as a reference. I've attached all step files. Parallel vs Perpendicular is referencing airflow…
