87 models
Collection of Gridfinity basic cups height 6 (46mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…
Da ich keinen Ladeständer für eine Huawei watch GT 2 gefunden habe welcher mir gefallen hat und auch ein "geschlossenes Metallarmband" unterstützt, die meisten sind für die normal enthaltenen Gummibänder und diese müssen geöffnet sein,…
With only 2 small screws, you can hang your guitar savely in your room with easy access, print it on the top surface and you will need no supportstructure.
Huawei GT4 Watch Charger Holder Stand 46mm
i like the original design but i added a bigger hole so the charger gets less hot when charging
Designed to be fully printable with no/minimal supports needed. You can rotate the STL so that the overhang is getting the best cooling if needed, but supports would likely mar the bottom surface. Fits a Galaxy Watch 4 Classic 46mm, but…
YouTube video showing how to assemble this eye: Bring your characters, robots, and props to life with this fully 3D-printable 46 mm animatronic eye assembly. Designed for hobbyists, droid builders, and animatronic creators, this compact…
46mm Round Holder for Honeycomb Wall. Can be used to hold things around 46mm diameter or less. I use it to hold my 4oz spray bottles that hold my IPA and Denatured Alcohol bed cleaning solutions. I also use it to hold a pill bottle that…
So I wanted to try designing a hook on type buckle that can be used with some straps for easy release. Could be used with Virtual Reality trackers like SlimeVR if your strap fabric fits fine. Quick release waist band? If you find a use…
Simple Master Spool with my beloved honeycomb pattern ;) + simple version for faster printing. Couple holes for filament ends and big thread. Inner width 46mm or 60mm. EDIT: 17.05.2021 - new versions of spools (slightly modified), easier…
A Gridfinity base for 46mm electrical tape, like the Duck brand tape. Based on Gridfinity by Zack Freedman , the incredible open source organisation solution.
Vacuum hose clip 36mm hose outer diameter 46mm Print with PETG
Dose mit Schraubverschluß für Kleinteile. Durchmesser innen 46 mm, sechs verschiedene Innenhöhen, 12 mm, 18 mm, 25 mm, 30 mm, 40 mm und 50mm. Den Teil mit dem Gewinde mit möglichst niedriger Layerhöhe drucken. ………………… Container with screw…
A crosshair laser guide holder for two 12mm line lasers for a drill press from Parkside PBTM 500 A1 with 46mm pipe diameter but it is easy customizable by the spreadsheet in the attached FreeCAD file for other diameters and lengths. The…
Two models are available, one with and without holes. Depending on how you wish to mount it. May fit other similarly sized watch models. If tweaking is necessary, the project file is included Supports are encouraged
This model was is a remeix of the model of @JG3Dcreations who remixed @RalfHorhager. This model uses, as the version it was remixed from, a M6x30 hex bold and one M6 nut. Prints without support material. Layerhight should be 0.2mm, for…
This flashlight holder can hold any <46mm / 1.81" (diameter) flashlight such as the Duracell 550 / 600+ , The Coast G50, Dorcy Pro / Ultra, Eagle , Pelican tactical, Maglite, etc… Note: >You can print it in any filament you want. > Use…
Ein Abflussstopfen mit einem Durchmesser von 42 mm bis 46 mm. Gedruckt in TPU 95A mit 10% Infill und ohne Support. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 10 Filament:…
Threads onto any lens that accepts 46mm filters Printed at .15mm layer height, .4mm Nozzle Prusa MK3S Photos shot with Nikkor Z DX 24mm F1.7 at maximum aperture Other filter sizes currently unavailable, please us an adapter (IE:…
Update: New edition with more uniform design than my more experimental original ones I made for my own use. This version uses the same spacing for the connectors and is easier to re-organize. 36 mm & 46 mm holders for MrHobby and Tamiya…
This nozzle base has an inner diameter of 46mm+clearance and a total length of 190mm. It can also be used with my air hose part collection . I also included the FreeCAD source file , so you can edit it on your own without any proprietary…
Generic plastic (storage/milk) crate
Remixed the tabs so it has a pin to hold the spring for easier assembly. Use supports under tabs. Use along with original body and lid here . Insert spring into pins, compress spring with tabs and place into lens cap body. Use a bit of…
Toilet Pneumatic Flush Button Made to replace button on a Thomas Dudley Pushflo Petite Single Flush 46mm - 320185. Just pushes on, friction fit. Now revised as the thin part of the plunger can snap with the original version.
Hinge designed for piece of 1.75mm filament supports 46mm lens filters with dimensions of 49 mm diameter and 7.2 mm thickness. fits 5 mm magnets with max 4 mm height 4 x 5x4mm magnets are pretty strong though, I think 5x2mm is ideal
This is a two-piece cover for a single (86mm) or double (146mm) British/European switch plate. It hides the physical light switch and allows wireless home automation remotes to be stuck on over it but it easily removed if access to the…
Print it on the side with three perimeters, no supports nor infill needed. Use it with original charger.
Circular Polarizing Filter case for 46mm diameters filters
Designed by YU CHEN YEH - Franky 🆕 Update (v2): I've uploaded a new version – aw_s10s11_46mm_case_v2! Changes in v2: make some holes for speaker/mic No brim required! This protective case prints reliably without a brim on a well-adhered…
My Proxxon vice is solid steel. The steel jaws are unforgiving when clamping objects made from soft or fragile materials. To protect the vice held object, I designed some flexible TPU jaw protection covers. The covers provides a soft…
I repair bikes & came across a bottom bracket tool that I didn't have and needed quickly for a job so I designed this to fit 46mm BB with 16 Notches . Wheels Manufacturing BB Tool. Socket versions didn't work for me so I added a handle so…
My pillar drill has 46mm diameter. For the clamp from Makers Manual I need an adapter from 60mm to 44mm.
Template for cutting the wheel arch on the body of a 12th scale RC pan car. The template has a 46mm radius and allows for 0.25 compression on the foam wheels.
Hi there! I made this simple base for my Samsung Galaxy Watch to force the correct alignment of my charger with the watch. I was tired of constantly finding my watch uncharged after placing it in its charger because the slightest movement…
This is a minimal throw lever for Kahles Helia scopes with 46mm eyepiece. I've only tested this with the 2-10x50i scope, but i think it will fit on any of the models with 46mm eyepiece. I've designed it to fit a M2x3 CNC Kitchen heat…
I am giving credit to IsmaelPR1 for his a8 e3d direct mount design, which I used as inspiration for my x carriage design. His original design is unfortunately meant for 45mm rod spacing (older a8's), lacked a decent z probe mount solution…
I build my Cineboy UPSIDEDOWN so the stock ducts were not working. Here are my 2 designs. The LED one is straight. The Cineboy.stl is conical weight in pla (0,15Layer / 2 Walls / 5 Floors top and down) is 16g. Category: Hobby
The stock mount was printed in very bad quality and kinda ugly. Here is my design, works great, Mount the R9 T-Antenna with light force and hotair. Happy flying Category: Hobby
This is a remix of the 46mm bracket for the excellent Makers Manual flexible dust arm for a pillar drill. The standard bracket comes with a simple hole to connect your dust collector. I use the excellent Cen-Tec Quick-Connect adapters for…
My Proxxon vice is a good size for electronics bench work, for example holding small PCB's, wires, connectors as I work with them. The vice also has significant mass and corners. To protect me and my desk from frequent vice movement, I…
Easy to fit in. Maybe also useable for your shaver Have Fun, don´t hesitate to give a like or post a make picture. Open for any improvement ideas.- just send me a message. Category: Bathroom
Since the thickness of the table was originally 36mm and my table has 46mm, to due a reinforce, I decide to do this remix. All other pieces should be printed by original.
Designed adapter allowing to quickly snap-on connecting 46mm filter to lens 52mm outer shell, when used with front thread protector instead of lens hood. It's a very versatile option for e.g. using ND 8x filters with F1.4 aperture during…
I noticed that the vacuum hose from my dust boot was skipping on the drag chain of my X-Carve, so I designed this bracket so the hose will clear it. To mount it I replaced the M5x20mm Z stepper motor mount bolts with 25mm ones, then…
Flat removeable mount for aftermarket ESCs. Uses the VXL 3s mounting holes. Any setting will work… LITERALLY ANY (I think).
This model is intended as a replacement for some of the EasyDrain shower drains. The main body diameter is 46mm. It's held above/within the drain by 4 prongs. Compared to the original model, this one has a handle attached, to make hair…
The funnel is engineered to fit directly into the basket itself. Its larger, 58mm diameter sits perfectly within the top of the basket, providing stability and ensuring it is perfectly centered. The funnel then steps down, with a smaller…
I made this vacuum adapter for my Metabo KGS 216 to fit the big attachment with 46mm outer diameter of my Makita VC2512l vacuum. Beside this it holds the vacuum hose in place while rotating or cutting. Before it was hardly possible with…
This is an adapter designed for use with Leica lenses that have a 41mm thread, allowing the use of 46mm UV filters and lens hoods. 41mm external 46mm internal The model has been tested and works normally in a 23mm lens using a 46mm UV…
The standard moto 360 charging cradle is a terrible travel companion, it takes up space and it doesn't hold the watch in place. This clip will keep your moto 360 2nd and 1st gen 46mm watch securely in place, so you can throw it in a bag…
Needed to make some grooves in 2 meter long timber for making a door and using tenons. Printed in PETG, 0.25 layers and 4 walls. The baseplate has 98 x 56 hole spacing. Provided the STEP file so you can mod it.
I made this vacuum adapter for my Metabo KGS 216 to fit the big attachment with 46mm outer diameter of my Makita VC2512l vacuum. Beside this it holds the vacuum hose in place while rotating or cutting. Before it was hardly possible with…
I made this for my old GW 4 Classic, since it was lasting 60min in max brightness and screen always on, i attached puck
This is an adapter designed for use with Leica lenses that have a 41mm thread, allowing the use of 46mm UV filters and lens hoods. 41mm external 46mm internal The model has been tested and works normally in a 23mm lens using a 46mm UV…
Simple bracket to fit 46mm mini-speaker to 56mm seat. Bracket height 4mm. Fits various toys
This is only a part of the SnowVi heads-up display (HUD) system that converts smart watch into HUD. For other parts, please refer to the HUD adapter main models: helmet mounted version goggle mounted version Refer to the provided…
Since I have my own spools with a 46mm diameter hole and they are very narrow, I needed to design my own clamping elemen
A handy ring that adapts 43mm, 46mm and 49mm threads down (or up) to 39mm, designed to fit the Alum Panomicron setup. It prints well with a 0.4mm nozzle at 0.12mm layer height, providing clean threads and a snug fit. Ideal for switching…
Nikon 62mm & 46mm lens cap holder for a 12mm Nicon camera strap. Printed on a well-tuned printed so you may need to make small adjustments to make it fit perfectly. My print details Feature Detail Printer type FDM Material type PETG (PLA…
PLA, PETG, ASA, ABS it's ok. 0,2mm layer, enable organic support
Desk Riser to raise your desk up, helps prevent the hunch from working at a desk to lower. Printed on my QIDI Plus 4 with a .4 nozzle & .016 setting. SIRAYA Tech ABS-GF Black with 25% Gyroid Infill.
I selected “make overhangs printable” as my PLA+ was not happy about the angles. worked pretty well. corners still need some fine tuning.
spice racks for use 400mm deep ikea cabinets, different sizes. Just cut in your slicer over the central parts add connectors, glue together with superglue
Print without Support Fits for 38mm 42mm and 46mm not for the Ultra
I made this for my old GW 4 Classic, since it was lasting 60min in max brightness and screen always on, i attached puck
Simple bracket to fit 46mm mini-speaker to 56mm seat. Bracket height 4mm. Fits various toys
This is only a part of the SnowVi heads-up display (HUD) system that converts smart watch into HUD. For other parts, please refer to the HUD adapter main models: helmet mounted version goggle mounted version Refer to the provided…
Designed for this Aliexpress 10 capsule set . These sets fit 6mm/20mm/25mm/27mm/30mm/35mm/40mm/46mm diameter coins perfectly.
I crafted a case for my 46mm Apple Watch 11. This model is compatible with the Series 10 in 46mm as well because theyre the same dimensions. I printed the Full Wrap case in TPU with Tree Supports and on 25% speed with 85% flow (my tpu was…
Model has left and right side, but they are just mirrored versions of each other. Made to suit spice containers that are 46 mm diameter and 65 mm tall.
46mm round. Originaly intended to be used as a potato gun projectile. (suitable for PP-barrels 50mm outer diameter). #no support required for versions A / B #tested at 30% infill / 1.6 mm walls #check for legal constraints before using it…
Another lens cap. Easy to print, real spring used. V2 files are modified version with 1mm lower rim and some extra space for larger diameter spring. EDIT: Per request added stl file for 50 mm cap. I added a screenshot from OpenSCAD to…
Toilet paper holder (shaft) including a printable spring. I have included two version, one in which you can add your own supports and one with included supports (shown in red), you just remove them after the print. Print the spring…
I really liked the profile of Cameron Asbury 's slim loop earplug case, but don't use earplugs. So, I hollowed the base. Now it is suitable for lots of little bits—pills, breath mints, coins. Could even be used for cosmetics. The lid is…
Canasta mallada adaptada para los pegboards marca Bord, de Industria argentina. También son perfectamente funcional para cualquier otro pegboard que tenga entre perforaciones 2.55 centímetros y que sean de 0.46mm aproximadamente de…
Keep your Tiffen 46mm camera lens filter secure and protected with this simple 3D printable holder. Designed to fit perfectly inside the Tiffen filter case, this holder prevents the filter from shaking or moving around, ensuring it stays…
No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here.
Works well with this item: Amazon.com: Reptile Thermometer 4-Pack Mini Digital Humidity Temperature Meters
This is a freezing bag dispenser so that you can keep your bags tidy and easy to get. It can fit any plastic bag roll up to a diameter of 75 mm and a length of 140 mm.
This is a 46mm to 49mm threaded adapter for putting a 49mm threaded lens filter on a 46mm threaded lens. 46mm threaded lenses are common in the micro four thirds system. Many Panasonic Lumix and Olympus lenses feature 46mm threaded front…
I try to change the 01_X_Carriage.stl to a rod wide of 45mm instead of 50mm. Remix of https://www.thingiverse.com/thing:3537449 File 01_X_Carriage.stl It is not testet Print Settings Printer: Easyframe3d Rafts: No **Supports:** No…
This is the mount for original garmin arm for the Coros Apex 2 Pro 46mm I remix from the orginal model for the Fenix 5x
![Anycubic i3 Mega X-Carriage [MK4] 45 + 46mm Version](https://media.printables.com/media/prints/950378/images/7252780_2125512e-cdc8-4bab-9138-78c45fa85d36_b3a4bb35-06f2-4dc2-b205-89e7da05e86c/large_display_01_x_carriage_45mm_950378.png)
