Lego Compatible (60483.dat) Technic Beam 2 Liftarm
This model is compatible with the lego system.
- Downloads
- 946
- Likes
- 48
- Rating
- 0
41 models
This model is compatible with the lego system.
This model is compatible with the lego system.
Case, designed for NX4832F035, but can fit for all similar models. Print parameters Supports: No supports necessary, place it facing down if you have enough cooling
Hi, these are three different insert boxes into Stanley SortMaster Junior (1-97-483) box. They increase number of compartment in the organizer. Boxes type 1 and 2 fits instead of the dividers. Print Settings Printer Brand: Creality…
This model is compatible with the lego system.
Dyson V10 Motorized Brush Endcap Replacement Compatible with Part Number: 967483-01 This design includes two variations: Gasket-Required Version : A version designed to accommodate a gasket, matching the original specifications.…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Danke an Astraholic05 für die genaue 1:1 Kopie des Original-Clips! Ich habe versucht, diesen Clip zu drucken und zu verwenden, aber das Original-Teil ist für den 3D-Druck nicht optimal, deshalb sind die Halte-Nasen ständig abgebrochen.…
Remix of Stanley SortMaster Junior (1-97-483) by @mirabatek . Enlarged version of insert box for Stanley SortMaster Junior Box (1-97-483). Print instructions: Material: PLA Filament: AURAPOL PLA 3D Filament L-EGO Yellow Layer: 0,2 mm…
Osłona czujnika ABS (454779) do Peugeot 206, której w tej chwili nie ma zamienników i pozostaje tylko serwis, oczywiście o ile jest w ogóle dostępna + Do wytoczenia w dwóch wersjach model śruby mocującej czujnik ABS oraz tę osłonę o nr…
Replacment for the handle that always breaks , I printed this in petg , standing on edge like in the pictures
You can use it from bottom or top down. The Ampmeter will fit from both sides. Thickness is 20 mm, the frame is not closed. You are able to remove the ampmeter in both directions by rotating it 90° (very comfortable if the cables are…
My fancy TPU cover / case / bumpers for a few different charger models. Charger Models so far: The new V4SC from folks like GuLi-EUC or Roger Charger. 105.5mm width, 42.8mm high. HUAWEI Charger R4830G1 from NingNing / houeuc. A common…
Drill/Screw bits holder for Makita LXT DTD155/DHP483 and maybe other Makita tools. Includes holes for 6x2mm magnets. Holes should be tight enough but you can always add some glue to make sure they stay in place. OpenSCAD source code…
I was missing a screw cover for the mounting screws that hold my LG dishwasher to the cabinet. This part is also 4830ED4001B (AP6231210) replaces 4830ED4001A, 4503016, PS12075919. Printed in PLA with a 0.16mm layer height. The visible…
Minimalist bumper for the small sized Huawei 4830 hyper chargers, will keep charger from touching the ground (better cooling) and protect corners against drops. The bumper weighs little to nothing (A set of bumper weight 40 grams = 1.4…
Spare part IKEA 128843 for FRIHETEN, GRUNNARP
Quickly made these up as I've battered the CNC casing on mine, sitting it down whilst charging and the occasional drop. Designed to work with the CNC casing for HW 4830, which is also sold as a CNC Hyper Charger 1800w by Alien Rides,…
There are certain jobs that require you to work with siemens components on your desk - be it developing/testing software/PLC, commisioning a new system or service/repairs. Having MCP just laying flat is very annoying - it wobbles a lot.…
A simple holder for Biltemas Art. 36-4831 superglue with activator I've made it for multiboard, but since it's standard multiconnect, it should work with HSW and Ikea Skadis too, with the right snaps 0.2 Layer Height No support 3 walls…
PLA 0,2 mm no supports needed
piece 48336 (1x2 plate with a side bar handle) about 2 grams
ORGANIZER GT483 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
My friend had trouble with his VW T5 Van heatingflap servo motor in the rear compartment. Shocked by the price of a replacement part he asked for help. We discovered the cam had worn and it rotated thurther than 120°. After carefully…
24mm wide hook for 22mm crutches
https://www.thingiverse.com/thing:4715483/files with 24mm wide hook
Cover cap for the Somfy TaHoma fire alarm (1811483) which looks a little better than the original square version. Printed with PETG. Everything has been tested and works perfectly.
Remix of the MPCNC Modular Electronics Mount to support the YB4835VA 0-100V 20A Double Display Voltmeter Current Meter…
This a driveshaft replacement for Revell 24830 and 24831 RC cars. Suitable for both front and rear. Must be printed in 100% infill and with supports. Tested successfully with PETG. ABS should be fine as well, but PLA is likely too soft…
This FCStd and STL will allow you to shove something arbitrary into your iiyama's monitor mount slot. The cover photo is an early draft, but I figured it was more obvious what you'd get if you clicked on this model.
A remix of Krzysztof Sikorski model, added prongs for the lock for a better grip as the original were a bit too short for my washer and reinforced the side prongs
Gridfinity - for pliers bahco 4430 and 4830
Cover cap for the Somfy TaHoma fire alarm (1811483) which looks a little better than the original square version. Printed with PETG. Everything has been tested and works perfectly.
This model is compatible with the lego system.
ORGANIZER GT483 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
This model is compatible with the lego system.
Replacment for the handle that always breaks , I printed this in petg , standing on edge like in the pictures