Counting matching models…
This is a wall mount for Guition ESP32-S3-4848S040 ESP32-S3 based touch screen, which can be purchased without the relay base. The relay base doesn't fit in a standard 60mm diameter appliance wall box, so if one doesn't really need the…
Endkappen für VELUX 948474 Insektenschutz Rollo ZIL passend für Insektenschutzrollo ab Januar 2003 (AN 01) Ein Set im Original kostet ~25€ + ~10€ Seil am besten mit dem Runden Teil nach oben drucken + überall Support Mit guten PLA sollte…
This model is compatible with the lego system.
Ceci est le modèle 3D pour une glissière de store obscurcissant Velux. Le modèle est plus solide que l'original car il intègre un oeillet métallique de 5mm limitant l'usure par friction du fil nylon. Impression PETG ou de préférence PCTG,…
This model is compatible with the lego system.
Version 2 update: Version 2 of the frame has some notches to click the frame into the rear section. This is a snug fit that snaps into place and is difficult to remove it again but will pull apart without damaging. Version 2 of the…
Additional Signs from DIN 4844-2 that are not (yet?) in ISO 7010 I have only created new signs if they do not already exist in my ISO 7010 Sign collections or if they look significantly different. These Signs were all created without…
I've been using jtenniswood's project for making easy LCD control panels (https://jtenniswood.github.io/espcontrol/).
Additional Signs from DIN 4844-2 that are not (yet?) in ISO 7010 I have only created new signs if they do not already exist in my ISO 7010 Sign collections or if they look significantly different. These Signs were all created without…
This is a simple casing for the Guiton 4” 480x480 ESP32-S3-4848S040 Smart Display. The display fits just right with additional space at the back to place battery. The USB C connector is still reachable for easy charging.
Additional Signs from DIN 4844-2, NEN 3011 & NF ISO 7010 that are not (yet?) in ISO 7010 I have only created new signs if they do not already exist in my ISO 7010 Sign collections or if they look significantly different. These Signs were…
This model is compatible with the lego system.
The part is bracketed below with the measurement of 41/4”. Replaces white rod only. It is slightly longer than the original, this allows it to be threaded farther up into the button assembly.
The case consists of two parts, which are attached to each other using 8 magnets 6x3mm. The adapter can be used as a standalone case for mounting the display on a metal surface. No support is required when printing.
As in the original model, print this in PETG or any other material with low friction, a low layer depth and high or even full infill. Before repairing the blind apply some wax to the wire in order to reduce friction. Even with that the…
Additional Signs from DIN 4844-2 & NEN 3011 that are not (yet?) in ISO 7010 I have only created new signs if they do not already exist in my ISO 7010 Sign collections or if they look significantly different. These Signs were all created…
Additional Signs from DIN 4844-2 & NEN 3011 that are not (yet?) in ISO 7010 I have only created new signs if they do not already exist in my ISO 7010 Sign collections or if they look significantly different. These Signs were all created…
This model is compatible with the lego system.
ESP32-4848S040 LVGL display wall mount dose. No holes, drill them where you need them after print. For two screws use heat inserts.
This model is compatible with the lego system.
Mount with a recessed pocket for the screen, no fragile plastic clips, for surface-mount installation onto a standard 60 mm flush-mounting box. Oblong holes allow horizontal alignment adjustment (tested with Legrand flush-mounting boxes).…
Case stand for the 4inch 4848S040 ESP32 Touch Screen Printed @ 0.24 layer height in PLA - no supports
This model is compatible with the lego system.
This is a full modeled gridfinity junk drawer combo. the only assembly needed is for the base plate. the mid section contains 4 holes on each side which you connect the other end pieces to using the printed dowels. Total filament used is…
Mount with a recessed pocket for the screen, no fragile plastic clips, for surface-mount installation for an outdoor Schneider Mureva fixing frame. This is a test as I'm not sure how the Guition display can handle the outdoor conditions…
ORGANIZER GT484 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
Tired of having your Lego Technic bent beams to take an awfull lot of space? Tired of having to sort them out each time you need a specific one? Tired of kids always mixing them up in the same bin, messing-up with your beautiful…
A simple remix that adds USBC/PD module support.
This closure is made to replace the closure of the Philips croque monsieur machine. I printed this with 50% infill and a brim, side ways.
Simple mount for securing a 8541634849 driver board. This is the board that works with LP173WD1, N173FGE-L23, B173RW01, LTN173KT01, LTN173KT02, B140RTN02, N140O6, B140RW02, & N140FGE-L31 model LCD panels. Accepts 4x M3 threaded inserts…
A wrench for fridge water filters Bosch Ultra Clarity 644845, REPLFLTR10, 740560, AP3962558; Haier 0060820860, RF-2800-13, RF-2800-15, Rangemaster DXD 90170; Bypass Cartridge. Print instructions Print using at least 15% infill in PLA,…
I customized original model to fit "CSD-4842S 6Port POE Switch 100Mbit/s.". It is cheap switch best for VOIP cameras.
Fichet 450/484 Display Stand
ORGANIZER GT484 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
This model is compatible with the lego system.
This model is compatible with the lego system.
This is a simple casing for the Guiton 4” 480x480 ESP32-S3-4848S040 Smart Display. The display fits just right with additional space at the back to place battery. The USB C connector is still reachable for easy charging.
This model is compatible with the lego system.
A bin for the Makita DHP484 with a cutout for the tool to rest in. Based on the excellent Fusion ‘script’ by https://www.printables.com/@Hudston_426317 The cutout is made using a rough mesh I made in Onshape based on a couple of reference…
This model is compatible with the lego system.
This model is compatible with the lego system.
It is necessary to remove the back cover and replace it with the printed model. PET_G. 0.16
This model is compatible with the lego system.
Maxxis makes some great flashing LED lights, but not all mounting surfaces are perfectly vertical. I designed this to allow for various angles/pitches. With the SCAD file and openscad, you can adjust them to the best angle for your…
Small base for Raspberry Pi Camera thing 3114849 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.20mm Infill: 20 Filament: Eryone PLA Category: 3D Printer Accessories
Self explanatory. Print Joe's model at https://www.printables.com/en/model/315451-spy-vs-spy, print the base (can do both on an Ender 3 sized build plate). Glue
This design will hold @ Joe_224841 Shaving bowl on the wall with hardware or Command Strips (That's what I used). It's cut out so all you need to do is slide the bowl in and presto! You're bowl is secure in the holder. It's easy to print…
This model is compatible with the lego system.
