Counting matching models…
An enclosure/case for a Sonoff 4CH Pro R2. Below the sonoff there is some room for wires or/and Screw Terminal Blocks. The walls are 3mm thick. I have used m3 Brass insert nut Injection Molding from…
simple case For 4 ch relay board from amazon MHCOZY brand i have included fusion360 and step files for the housing and the board to use if you would like to modify mine or make your own! Please note you may need to snap off the extra…
This is a remix to put them all inside a case.
Remixed model "Sonoff 4CH Pro R2 enclosure" in order to integrate also a tiny power adapter inside
4ch MOSFET module DIN rail mount 60x60mm mounts holes Compatibility: 4 ch MOSFET module 35mm DIN rail Mounting components: M3 screws M3 stand
Created by large corporations as a highly adaptable and agile robot to recover and deliver packages across various obstacle-filled environments, such as mountains, valleys, or forests, gone rogue due to faulty programming. Print in PLA or…
There are Two parts to print ; 1. The back cover (I printed in several parts then glued) 2. The hose connection, here I choose to make the same design than the orgininal, but you could design what you prefere (I glued it too). The device…
This mount places the 4-channel relay board vertically on your DIN rail, saving you a lot of space in your electronics assembly. It fits this generic board from e.g. Reichelt:…
small casing for LC-Technology 4 channel relais card. more information: https://templates.blakadder.com
This is my 4th model in Fusion 360, my 2nd enclosure and my first publicly available model. I made a handful of iterations on the primary case and a couple on the lid. Took me about 5 hours with the iterating and testing my design. Its a…
This is a simple 32700 LiFePO4 battery charger, that I've build to precharge a replacement battery for my MeshCore Repeater . It fits a common USB charging board from AliExpress . The OpenSCAD source files are maintained on GitHub .
4CH Arduino relay module with the possibility to insert another 4CH module.
Compatible avec toute radio de protocole AFHDS 2A
Hello, This is a box to include 2 4CH zigbee relay for my Bubendorff rolling shutter. All is managed a Jeedom. Ref of the relay: https://www.aliexpress.com/item/1005003073340298.html?spm=a2g0o.order_list.0.0.21ef1802sWmATE Ref of the…
Svítící rámeček pro chytrý přepínač scén tuya. Tisk: Vrstva: 0.28 Perimetry: 2 tisk z perimetrů Filament: PetG Spectrum Glow in the dark Rozměry pro umístění přepínače scén: V1: 86.4x86.4 mm, rádius v rozích: 5 V2: 86.4x86.4 mm, rádius v…
I designed this thing to mount this 4 channel mosfet driver board to my Ikea Lack enclosure: https://www.amazon.com/gp/product/B01MRQFYJN/ This allows me to add control of several 12V fans and case lights with Marlin firmware. Of course…
Mounting plate for DIN rail WiFi LC Technology 5V 4 Channel Relay Board (LC-ESP01-4R-5V). With the option of adding a 36V/5V stabilizer. https://templates.blakadder.com/LC-ESP01-4R-5V.html
This is a hanger attachment for the model AZ88598 4 channel data logger. With the 4 embedded magnets strength, you will want to lift the datalogger off of the hanger posts before trying to remove the bracket from a metallic surface to…
Made for this relay from Aliexpress . Requires: 4x M3 x D5.0 x L4.0 inserts 8x M2.5 x D3.8 x L3.6 inserts 4x M3 x 16mm screws (SHCS) 8x M2.5 x 6mm screws
I needed a way to mount two relays in a way that takes less space horizontally. This is the result. There are two versions of the plate, one with a stopper at the bottom, one without. Both have screw holes for securing the device. Extra…
I was in need of an enclosure for my LED Controller and couldn't find anything that matched this particular device. I've seen them out in the wild before so I'm sharing my work for those that also use this cheap yet effective device.…
Just quick model, so I do not get any shorts. I am using this board to automate some stuff on my electronic workbench. https://www.aliexpress.com/item/1005008369737053.html This is a piece of plastic to isolate the bottom. I left the…
I was in need of an enclosure for my LED Controller and couldn't find anything that matched this particular device. I've seen them out in the wild before so I'm sharing my work for those that also use this cheap yet effective device.…
There are Two parts to print ; 1. The back cover (I printed in several parts then glued) 2. The hose connection, here I choose to make the same design than the orgininal, but you could design what you prefere (I glued it too). The device…
This front panel is designed for the BT4-4CHN tester in the version that supports both 18650 and 21700 battery types. My model does not include holes for external battery connection. Installation recommendations: Fit the printed panel to…
Print the head in PETG and the body covers in either PETG or PLA and add supports on both
A mount for the 64 channel data acquisition board by A2D Electronics available here . I printed the entire bottom plate with 0 top and bottom layers and hex infill to save filament and make it a bit more flexible to snap around the edges…
