Counting matching models…
When I started printing face shields, I wanted to use larger (4kg) spools. Since the Prusa MINI spool holder is very good, but the lower rails were too short I modified them (now they are 15mm longer). Here you can get the original STL…
This is a remix of KONEz*347 spool holder with 4x 608 bearings. I adjusted the rollers, no supports needed anymore and added a base to keep the feet together. This spool holder is 144mm wide, so it can handle almost every spool out there.…
Filamet spoolholder X2 The filament spool holder X2 for Prusa MK3 can hold any 1kg standard spool (also the 2kg Prusament PLA Recycled) as well as with the 2 different extensions spools up to 4kg or a maximum spool diameter of 350mm. The…
Filament holder 2KG / 4KG on the wall You will need to buy a 24mm round wooden stick and some glue. Držák filamentu 2KG / 4KG na zeď Budete si muset koupit dřevěnou kulatou tyčku o průměru 24mm a nějaké lepidlo.
Wallmount for Spoolholder X2 The wall mount for the filament spool holder X2 can hold filament spools up to 4kg (or generally spools with a diameter of up to 36cm. With the spacers L, M and S, the distances for the different axes of the…
Ref 4kg spool, to design a custom spool holder.
3D printing filament spool holder, specifically designed to securely accommodate large 4kg spools
Manfrotto Handle for the 3.4 Kg black weight with M8 screw and bold
Will fit any large spool with a center opening of at least 50mm. Uses the following bearing https://www.amazon.com/dp/B07SZ87WSM the screws that come with the unit thread into the plastic. I recommend printing in at least PETG, with 4…
The small-footprint kettlebells are unstable on a wire mesh shelf. The tray serves to provide a wider base. Trays for 4 kg and 6 kg dumbbells are provided. Model is build123d, you can adapt for your requirement.
Patins pour pied parasol professionnel plat lour de 14kg https://www.rouxel.com/p/pied-lourd-plat-14-kg-23005 réf 23005 pied plaque lourd PPL14. Ces parasols sont très pratiques, suffisamment larges et lourds pour tenir, très près du sol…
Manfrotto Handle for the 3.4 Kg black weight with M8 screw and bold
Some Simple Tilted IKEA Skadis Hooks, which only take about 1.6g of filament per Hook. According to my testing they can handle atleast 4kg in PLA, usually up to 7kg.
Simple remix of a simple spool holder that just changes the leg -> base attachment from a printed pin/socket to an M4 heat insert / screw. Modeled to use Ruthex M4 standard inserts, 5.6mm bore, 10mm depth allowance. M4x8mm screws work…
I needed a filament spool roller that operated smoothly with bearings for my dry box. I keep my 4kg carbon fiber nylon in the dry box until the spool is empty. This model fit the bill just needed it to be a little wider. I widened the…
Everything was printed with PETG using 3 walls and 15% infill.
MK4 spool holder for 4x1kg or 2x2kg (or combinations). Need: M8 thredshaft ~370mm 8x bearings 608ZZ (ABEC for in line - bought in sport shop) 2x pad D8 4x M8 nuts Arms (one is mirrored) glue together.
