Counting matching models…
A simple component you can use to represent a 50mm x70mm perf board, for use when designing cases etc. Not suitable for printing. The STEP file can be uploaded then imported into Fusion 360 for use in your projects.
Organize and store your component. This drawer is made for smaller components, tools,etc, you decide what to put :). There are 2 different drawer available : Drawer 1x1 Drawer 2x1 - with 1 separator You will need to print 8x Drawer 1x1,…
A stackable Box with an optional inlay and a separator that allows to divide the box in multiple compartments. I printed all the parts without support, although the rim at the bottom may need a support. All the parts have a good fit, but…
There are 3mm spaces below the board and 18mm spaces above the PCB. There are two lids. The first is with holes for DUPONT couplings and a 5110 display and the second is solid. The box is equipped with eyelets for mounting on surfaces. It…
Bonsai pot 29 round conical 150x150x70mm, no support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required…
Jde hlavně o držák pro 50x70mm oboustrannou PCB prototypovou desku, která slouží pro napájení ovládací elektroniky s relé 4 kanál. Spolu s úchytem wifi lze získat elegantní modul s relé a wifi vzdáleným ovládáním. Prototypovou desku…
had few hundreds of 70x100 mm cards that I wanted to cut in half to use as flashcards Decided to create this simple jig to make the process a little faster/easier
I have created a remix of Zack Freedman’s Gridfinity design, specifically optimized for 50x70 mm printed circuit boards (PCBs). This custom version ensures a tight fit , keeping PCBs securely in place while enhancing stability and…
Można zgrzać wystające elementy kratki z wewnętrznej strony obudowy poprzednio robiąc otwory lub obciąć i m inny sposób - klej ...
Baroque Frame for 50x70 cm Painting (8 Pieces) I was done with plastic pumpkins, so this Halloween I hung a Van Gogh. The frame is baroque, about one meter tall, and it comes off the printer in eight pieces. Hidden pins lock them…
just a small holder for 50x70 mm prototyping PCB with 2 holes for connectors on the side
These are custom Niimbot label holders for the Multiboard system , designed to keep label rolls neatly stored, easy to access, and clearly visible on your board. The holders are made to suit the following label sizes: 25x15 40x30 50x70…
just a small holder for 50x70 mm prototyping PCB with 2 holes for connectors on the side
I created this adapter for kitchen exhaust/smoke extraction because I couldn't find this size anywhere, the problem being that in the kitchen I already had a rectangular hole with these measurements
Gridfinity 2x2 holder for the universal 50x70mm PCB with small storage space. Also contains the original FreeCAD model for easy modification (Uses the Gridfinity Workbench add-on )
I created this adapter for kitchen exhaust/smoke extraction because I couldn't find this size anywhere, the problem being that in the kitchen I already had a rectangular hole with these measurements
I found some good quality ABS (without the stink or the warp, win!) that came in rather deep spools. The original spool holders of the Creator 3 won't hold those spools very well, they kept on leaning down with the risk of falling. Plus I…
Organize and store your component. This drawer is made for bigger components, tools,etc, you decide what to put :). There are 2 different drawer available : Drawer 1x1 Drawer 2x1 - with 1 separator. You will need to print 4x Drawer 1x1,…
This is a box with 3x2 drawers. You can print the drawers what you need, there is available 1 with separator. Drawer 1x1 Drawer 2x1 _with 1 separator. Print instructions Print Settings ============== Printer Brand: Creality Printer: Ender…
New and bigger stackable organizer what can be attached to the other ones. Everything is easy to print, without supports, There are 3 different drawer available : Update : 31.01.2021 added picture from the box 01.02.2021 made a bit…
New and bigger stackable organizer what can be attached to the other ones. Everything is easy to print, without supports, There are 2 different drawer available : This thing is still a Work in Progress. Files, instructions, and other…
