35 models
I used Sneaks “raspicamcover_lense.stl” and moved the hole from the bottom to the top and added a few bosses to hold the camera against the base.
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
A mount which will let you attach a Raspberry Pi Camera to 40mm Fan Spacing, you can share the same screws with a fan if they are long enough. I couldn't find a similar mount so I decided to go ahead and try to make my own with Fusion360…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
So I am new to Fusion360 and made an improved version of my Raspberry Pi Camera mount! This Camera specifically is; Waveshare - RPi Camera (B) - OV5647 This mount uses two 40mm fan spacing screw points. I made this to match the 40mm fan…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Replace the original M6 threads on the OV5647 sensor (Arducam/Zerocam) to M7 threads with this casing. Before changing the threads, you need to remove the original M6 lens casing from the OV5647 sensor body. To do this, you can carefully…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
This is a simple mount for the OV5647 style IR-Cut Cameras that mounts to the Articulating Mount by Sneaks. It has cutouts for 9mm heatsinks, as seen being used for the Raspberry Pis. Simply mount the Camera by pushing it into the Top…
This model is compatible with the lego system.
This is a dead simple camera case for the OKdo OV5647 5MP Raspberry Pi Camera with M12 Lens compatible with the Articulating Raspberry Pi Camera Mount . It doesn't use the ball mount system but instead snaps directly into one of the link…
Assembled with 3mm bolts, freely adjustable. Confirmed works with autofocus and fixed focus versions of the OV5647.
This is a remix of rin_ofumi's great case for the Raspberry Pi Zero and camera module with the “Frank-S01-V1.0 OV5647” designation. It's sold online by Pimoroni and on Amazon by Arducam. I added slots on the top/rear to allow airflow for…
This is a case for the Arducam OV5647. It was designed to fit on this Cam Boom for the Ender 3, though it should be trivial to make other holders that fit it. The mounting hinge is sized for an M2 machine screw, and should be snug enough…
Camera mount for the OV5647 Fish Eye Raspberry Pi Camera. Works great with: https://www.prusaprinters.org/prints/150154-elegoo-neptune-2-raspberry-pi-camera-arm
I made a minor change to nicoko's camera cover ( https://www.thingiverse.com/thing:4706284/files ) that works with the ender 3 camera mount ( https://www.thingiverse.com/thing:3294512 ). I'll include the files here, thank you to…
I combined this Camera Case for the OV5647 (M12 Lense) raspberry pi camera with the ball mount from the Articulating raspberry Pi Camera Mount
Minimalist camera mount OV5647 for Sovol SV06 - Hidden cable routing - Easy camera positioning - Does not go beyond the outline of the printer You Need: 1x Back Camera.stl 1x Front Camera.stl 1x Mount Arm.stl 2x Pin.stl If you like my…
Because I had previously used the ps eye camera I wanted to use the arms again and decided to adapt the housing for the IR camera. Therefore, it was also necessary to adjust the arm so that the connection was changed by 90 degrees on one…
I had a lot of 14mm heatsinks laying around, so I changed the NoIR Model to fit those. And because I wanted a blank front, I removed the lettering. You need 4x M3x10 screws to put together the front and the back. Thanks to @Paul_GD for…
I cobbled this together in TinkerCAD because it is a PAIN in the butt to find a camera mount for this specific board (the 36x36 board with the screws on each corner...) so! I made this! I jacked the mount point from one of the camera…
For the stand use Organic support in PrusaSlicer 2.6. I've printed in PETG, Layer height of 0.2 mm, 15% infill on a Prusa MK3S+. Textured build plate. Needed hardware: (2) M3 nut (2) M3 square nut (insert square nuts before closing the…
Mounting box for InnoMaker CAM-OV5647 I designed this box to use with the excellent mount by lab27 https://www.thingiverse.com/thing:3121052 and the 180 degree remix of the arm by inomad360 https://www.thingiverse.com/thing:4514535 This…
This is a remix of this mount by Whitefiretiger : https://www.thingiverse.com/thing:5559571 This is designed to work with this specific Arducam Enclosure: https://www.thingiverse.com/thing:5350571 This is also designed to work with this…
A camera mount for the “MakerHawk IR Fisheye Pi Camera OV5647” for the SV06. Designed to fit the modular mounting system arms, which can be found here: https://www.printables.com/de/model/185322-modular-mounting-system-arms-customizable…
I got couple cheap camera modules for Raspberry PI from aliexpress (https://www.aliexpress.com/item/1005004549580517.html) (The one with 67 degree angle and IR modules) Thought to use one of them to monitor my printer - turned out camera…
I wanted a single bracket to hold a camera and a chamber thermistor, along with the camera being on the right side - closer to the Pi. Camera is set pointing down at 10 degrees for best visibility. Use M2x8 (or shorter) self tapping for…
I made this camera mount for my Prusa Mini+ and 5MP Arducam (https://www.amazon.com/gp/product/B0867C9SZP) Thanks to @andimoto I used a similar way to mount to the nozzle fan. This camera plugs directly into a Raspberry Pi running OctoPi…
OV5547 Pi camera mount for a lack enclosure. I needed something quickly so knocked this up. It is designed to work with this camera housing specifically from Cults3D: https://cults3d.com/en/3d-model/tool/boitier-camera-rasperry-ov5647-ir…
3D Model of the Arducam Day-Night Vision Camera (Fisheye) OV5647 5MP linked below. LINK: https://a.co/d/fcFQiCM
Adjustable frame for lack table enclosures
Front and back pieces should fit together snugly and remain in place with/without glue.
Mount fitting cheap Arducam: https://www.arducam.com/arducam-ov564 Changed also connection pins by +0.1 mm to tight fit.
remixed to fit this mount better. https://cults3d.com/en/3d-model/tool/boitier-camera-rasperry-ov5647-ir
This model allows you to mount an Arducam OV5647 Raspberry Pi Camera to the X-Axis Motor Mount, providing a stable mount that moves with the Z-Axis vertically. Designed for Prusa MK3S/MK3S+. Compatibility with other printers is possible…
Couldn't find any mounts for this combination, so made my own. Holds an arducam ov5647 and an HDMI-to-CSI adapter board on the back using standoffs. Uses M3x8 screws on the joints, mounts to extrusion using an M5 screw (allows for…
modification for OV5647 camera modul
A printable holder for a Raspberry Pi Zero 2 W and an OV5647 camera module or similar compact Raspberry Pi camera. It is intended to give a stable camera view of a 3D printer running Klipper with Mainsail. What this is for Use the holder…
Couldn't find any mounts for this combination, so made my own. Holds an arducam ov5647 and an HDMI-to-CSI adapter board on the back using standoffs. Uses M3x8 screws on the joints, mounts to extrusion using an M5 screw (allows for…
