Counting matching models…
I remixed the feeding hole cover by Robware to have ventilation holes in it. Had an Amano that wanted to go exploring one day… So I just wanted a cover that keeps them in, but at the same doesn't completely block the already limited…
Two simple arms/props to hold open the lid of the 57L (15gal) Fluval Flex aquarium. They are long enough so that they just fit diagonally on a Prusa MK3S printer bed (just a smidge over 29cm in total length). Update: Two shorter…
To hold a fish tank hose on a big orange 5 gallon bucket. Remixed from this model to better fit a big orange bucket from “the big orange hardware store”; it now properly grips one of the rings near the top. I fixed the slanted hook before…
Simple cap for 5 gallon water jug to keep dust and debris out. Simply sides over top of jug not water tight or secured. 15% infill 0.2 layer height PLA No Supports Print Flat Side Down
Cap for 64mm (2.5") threaded barrel openings. Bung is 33.5mm (1.319") OD for my rainwater collection hose. 3MF has pre-painted supports, be sure to use organic supports as only the overhang above the threads requires support. Print height…
These are 2.5 gallon bucket tops for kratky style hydroponics. the design is similar to my original 40oz pots https://www.printables.com/model/897855-40oz-kratky-hydroponic-pot-with-water-level-indica. There are several lid options for…
*Update: Added Optional air valve requires marble and adding adding a hole to original design Water filter holder to hold a standard Brita water filter to allow filtration between 2x 5 gallon water jugs in a hourglass style. Print…
Holder for 2 liter plastic bags. Bag is attached with a wedge. The hands / whiskers keep the bag open. I used sticker instead of screws to mount it. In the design screw holes are slightly bigger and lower than in the images I took. When…
5gallons cap opener. For blades, you can use the cutter blade (small), snip one blade, and insert it in the provided blade gap. To use, just insert in the cap and twist.
2.5gal Shop-vac Adapter for Wen 3 by 21 belt sander (HB321V). Print with at least 3 walls and use a brim unless your printer has really good first layer.
I have a rechargeable battery powered water dispenser pump but it is made too it the large 18L / 5gal water dispenser jug bottles so when using it with the common 5L bottles in EU it did not sit properly on the top and often fell off.…
Was made to make detecting 2.5 gallon water bottles for labeling more uniform by detecting the cap instead of the leading edge of the bottle. Uses the original sensor and reflectors
Fun little 55gal. drum valve cap, printed without supports 10% infill
Print in a material safe for outdoors, I used PETG, but any spacing and use an infill over 15% and you should be good.
This was my first ever design and im happy with the result. The caps fit snug enough to go on easy and not hard to pull off. Printed in TPU with 15% infill
(UPDATE) (I NO LONGER HAVE THIS TRASH CAN ANYMORE SUPPORT FROM CREATOR IS UNLIKELY BUT POSSIBLE) This trash can pedal is designed for the 10.5-gallon (40-liter) Pioneer Woman trash can, but it should also fit other trash cans of the same…
