Counting matching models…
Collection of screws (ISO 4017 / DIN 933) including : M5x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30, 35, 40, 45, 50 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too…
Collection of screws (ISO 10642 / DIN 7991) including : M5x 6, 8, 10, 12, 16, 20, 22, 25, 30, 35, 40, 45, 50 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight,…
A simple base adapter for older Warhammer The Old World, designed to have just enough clearance for models whether you want to glue them in or leave them swappable, this design uses 3mmx1.5mm magnets to keep your soldiers in ranks. This…
This model is used to help drive in a Subaru CV Axle Seal (35x50x9mm). Be careful not to drive the seal in too far!
Cups for SCM
I designed this to use with the nice AngelWings Design Pug DLG but it is suitable to any other small glider. Print the propeller blades with 0.1mm or 0.15mm layer height and the other parts are suitable for 0.2mm. 100% infill. Tested with…
The updated model now has a lower overhang angle (<45°), with the upper part centered and improved sturdiness. 20% infill PLA or PETG No need for support Suits for 3mm² cable M4 screw holes
The updated model now has a lower overhang angle (<45°), with the upper part centered and improved sturdiness. 20% infill PLA or PETG No need for support Suits for 4mm² cable M4 screw holes
Zwei Objektivdeckel für ein Canon 15x50 Fernglas die mit L und R gekennzeichnet sind um des verstauben der Linsen zu verhindern. Two lens caps for Canon 15x50 binoculars marked L and R to prevent the lenses from getting dusty.…
I use a lot of 5x50mm screws in my workshop so I needed a bigger 3x4 box for them, it is 7u high. Comes with a scoop, the size is imprinted on the lip to be coloured in with a marker. The walls are a bit thicker than standard to keep it…
Oring for Bauer HD 8,5x50 binoculars made from TPU
UPDATE: //2 of the Mounts had some fitment issues. redesigned and reuploaded those as “Rev2” Dragchain Mount for the StrongholdPro CNC to hold bigger, sturdier dragchains from aliexpress. Dragchains used:…
Use this to play regiment style games with your oval based miniatures. A press fit recess for 2mm by 6mm round magnets is located at the bottom for easier transport.
Flat steel locksmith's angle, intended for measuring and marking work. The main strip is made of carbon steel C45 in accordance with DIN 875/II. Ground and polished surface. The range of the measured angle: 90°. Size: 75x50 mm.
I needed a little shelf to put my phone/watch charging station on so I could have some room underneath for clutter. So I designed this. Super light duty - don't expect it to hold anything super heavy! Printed in PLA, would probably be…
Printed with : Creality Ender 5 S1 + Sonic Pad, 0.6mm Nozzle, PLA, 0.4mm Layer height, 50% Gyroid infill, 2 walls, Tree support. Slicer print time: 57 minutes. Print time: 39 minutes. ~5M of PLA = ~15gr = ~€0.30 worth of filament.…
Collection of screws (ISO 10642 / DIN 7991) including : M5x 6, 8, 10, 12, 16, 20, 22, 25, 30, 35, 40, 45, 50 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight,…
Drawer to store screws or any other sort of small objects. Print suggestion: height: 0.2mm fill: 15% Attach the top using superglue
Ikea Skadis/Skådis tape holder for 75x50mm inner diameter tape.
Small doll bed to be printed and glued together. While even 0.6 nozzle may be assembled, .25 one gives best results :) Little support needed in the corners. Remove “elephant foot” before assembly (otherwise parts won't fit together).…
-I tried printing them only with PLA only so i don't know how other materials perform -Supports are recommended (both types are ok) They fit perfectly in each other 0.2mm layer height Somewhere beetwen 50 - 80 mm/s for lower-quality…
The updated model now has a lower overhang angle (<45°), with the upper part centered and improved sturdiness. 20% infill PLA or PETG No need for support Suits for 1.5-2mm² cable M4 screw holes
The updated model now has a lower overhang angle (<45°), with the upper part centered and improved sturdiness. 20% infill PLA or PETG No need for support Suits for 6mm² cable M4 screw holes
The updated model now has a lower overhang angle (<45°), with the upper part centered and improved sturdiness. 20% infill PLA or PETG No need for support Suits for 6mm² cable M4 screw holes
The updated model now has a lower overhang angle (<45°), with the upper part centered and improved sturdiness. 20% infill PLA or PETG No need for support Suits for 4mm² cable M4 screw holes
Lens Cover for the Vortex LHT 3-15x50 scope. Add circles of clear plastic, either press-fit them or glue them in. Attatch aprox. 300mm elastic coords between the holes on the side of the covers. I sliced with Prusa Slicer 2.9.2 default…
Printed with : Creality Ender 5 S1 + Sonic Pad, 0.6mm Nozzle, PLA, 0.4mm Layer height, 50% Gyroid infill, 2 walls, Tree support. Slicer print time: 57 minutes. Print time: 39 minutes. ~5M of PLA = ~15gr = ~€0.30 worth of filament.…
This is an end cap for a rectangular tube like you see in some desks. The tube in the picture where I made this for measures 22X47 mm inside and 25X50 mm outside. https://www.3dwp.nl
Simple spool holder for a standard 75mm x 50mm solder spool (with 20mm inner hole). It can easily be customized to be longer or taller if you want… (edit blend file or stl). The middle bar was taken and lengthened from here (I'm lazy):…
Espessura: 7,5mm Diâmetro interno 1: 50mm Diâmetro interno 2: 75mm Comprimento total: 15cm Comprimento do cone: 1cm
