33 models
Use the top part from the original model. Not the cleanest result, but it works.
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant
A simple and elegant puzzle for a little brain-teasing. The part orientations are ready to print and you can choose one of three stand designs. Hard difficulty. Printing instructions: No supports required. Layer height: 0.2mm
A simple and elegant puzzle for a little brain-teasing. The part orientations are ready to print and you can choose one of three stand designs. Hard difficulty. Printing instructions: No supports required. Layer height: 0.2mm
This remix is based on GrafXP s excellent Modular Rack System for Gridfinity Drawers (thanks for sharing also the .step files!). If you want to know more about the rack system, please visit the original author's page! Please note, that…
The goal of this puzzle is to put all the 17 pieces into the container so that the lid fits correctly. I created this puzzle from an old wooden one that i got for my birthday decades ago. I made two versions: a large one for adults (3…
There is problem with big forces from friction in the end (or make bigger hole +0,5mm?) if you have good printer maybe have you chance spin without encap, it spine by me - forces ca 30N
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
Just a simple mesh box as you see in the photos. I made this to hold silica besiccant beads. Two variations, one has 4mm walls and 2mm holes. The other has 2mm walls and 1mm holes. Both cases the holes are spaced out with 1mm spacing on…
Cube_5x5x5_E1_K4_L4 - Peng Song A size 5 cubic puzzle of 4 pieces, rated at level 4 (moves to remove first piece). Adapted from web page: https://sutd-cgl.github.io/supp/Publication/projects/2022-SIGGRAPH-High-LevelPuzzle/index.html ACM…
Inspirovala jsem se u papírové krabičky na Pinterestu: https://cz.pinterest.com/pin/596938125640292879/ Tisk: Tryska 0,4 mm Výška vrstvy 0,2 mm Podpěry u části se vzorem nutné
Remix of SuperFrodo's magnetic detent for the TWCS throttle. Made for 2 5x5x5mm magnets that you can get for cheap on AliBaba. Update : The cheap Alibaba magnets aren't enough make it even slightly "grip" to a position, it depends on the…
Cube_5x5x5_E1_K5_L14 - Peng Song A size 6 cubic puzzle of 5 pieces, rated at level 14 (moves to remove first piece). Adapted from web page: https://sutd-cgl.github.io/supp/Publication/projects/2022-SIGGRAPH-High-LevelPuzzle/index.html ACM…
Cube_5x5x5_E1_K8_L12 - Peng Song A size 5 cubic puzzle of 8 pieces, rated at level 12 (moves to remove first piece). Adapted from web page: https://sutd-cgl.github.io/supp/Publication/projects/2022-SIGGRAPH-High-LevelPuzzle/index.html ACM…
https://www.printables.com/model/144878-filament-cleaner check this one out if you have square magnets that are 4x4x2
Remix of Prusa CORE One SKADIS mod with different Magnets for the Hinge (12x4.8 cup-magnet) and upper arm (5x5x5 dice)
Cube_5x5x5_E1_K8_L4 - Peng Song A size 5 cubic puzzle of 8 pieces, rated at level 4 (moves to remove first piece). Adapted from web page: https://sutd-cgl.github.io/supp/Publication/projects/2022-SIGGRAPH-High-LevelPuzzle/index.html ACM…
Cube_5x5x5_E1_K4_L16 - Peng Song A size 6 cubic puzzle of 4 pieces, rated at level 16 (moves to remove first piece). Adapted from web page: https://sutd-cgl.github.io/supp/Publication/projects/2022-SIGGRAPH-High-LevelPuzzle/index.html ACM…
Gontier_5x5x5_E1_K4_L8 - Peng Song (Gontier adaptation) A size 5 cubic puzzle of 4 pieces, rated at level 8 (moves to remove first piece). Adapted from web page:…
Cube_5x5x5_E1_K8_L8 - Peng Song A size 5 cubic puzzle of 8 pieces, rated at level 8 (moves to remove first piece). Adapted from web page: https://sutd-cgl.github.io/supp/Publication/projects/2022-SIGGRAPH-High-LevelPuzzle/index.html ACM…
Gontier_5x5x5_E1_K3_L9 - Peng Song (Gontier adaptation) A size 5 cubic puzzle of 3 pieces, rated at level 9 (moves to remove first piece). Adapted from web page:…
Cube_5x5x5_E1_K6_L8 - Peng Song A size 5 cubic puzzle of 6 pieces, rated at level 8 (moves to remove first piece). Adapted from web page: https://sutd-cgl.github.io/supp/Publication/projects/2022-SIGGRAPH-High-LevelPuzzle/index.html ACM…
Base plate for a 5x5x5 led cube ,It can be inserted in a 1/4 mortise grove of a wooden box frame or other. Print Settings Printer Brand: RepRap Printer: Prusa I3 Rafts: No Supports: No Resolution: any Infill: Any Category: Electronics
CubeFrame_6x6x6_K3_L9 - Peng Song A size 6 cubic puzzle of 3 pieces, rated at level 9 (moves to remove first piece). Adapted from web page: https://sutd-cgl.github.io/supp/Publication/projects/2022-SIGGRAPH-High-LevelPuzzle/index.html ACM…
Cube_5x5x5_E1_K4_L8 - Peng Song A size 5 cubic puzzle of 4 pieces, rated at level 8 (moves to remove first piece). Adapted from web page: https://sutd-cgl.github.io/supp/Publication/projects/2022-SIGGRAPH-High-LevelPuzzle/index.html ACM…
Cube_5x5x5_E1_K6_L4 - Peng Song A size 5 cubic puzzle of 6 pieces, rated at level 4 (moves to remove first piece). Adapted from web page: https://sutd-cgl.github.io/supp/Publication/projects/2022-SIGGRAPH-High-LevelPuzzle/index.html ACM…
Cube_5x5x5_E1_K6_L12 - Peng Song A size 5 cubic puzzle of 6 pieces, rated at level 12 (moves to remove first piece). Adapted from web page: https://sutd-cgl.github.io/supp/Publication/projects/2022-SIGGRAPH-High-LevelPuzzle/index.html ACM…
Cube_5x5x5_E1_K4_L12 - Peng Song A size 5 cubic puzzle of 4 pieces, rated at level 12 (moves to remove first piece). Adapted from web page: https://sutd-cgl.github.io/supp/Publication/projects/2022-SIGGRAPH-High-LevelPuzzle/index.html ACM…
Gontier_5x5x5_E1_K5_L8 - Peng Song (Gontier adaptation) A size 5 cubic puzzle of 5 pieces, rated at level 8 (moves to remove first piece). Adapted from web page:…
Cube_5x5x5_E1_K6_L13 - Peng Song A size 6 cubic puzzle of 5 pieces, rated at level 13 (moves to remove first piece). Adapted from web page: https://sutd-cgl.github.io/supp/Publication/projects/2022-SIGGRAPH-High-LevelPuzzle/index.html ACM…
Vorbereitung: Nach dem Druck die Stützstruktur entfernen Anwendung: Magnete ins Magazin einsetzen ggf Haltemagnet einsetzen (optional: Einkleben/Mit Klebeband fixieren) Magnet herausdrücken Magnet an den Schablonen-Magnet übergeben.
Vorbereitung: Nach dem Druck die Stützstruktur entfernen Anwendung: Magnete ins Magazin einsetzen ggf Haltemagnet einsetzen (optional: Einkleben/Mit Klebeband fixieren) Magnet herausdrücken Magnet an den Schablonen-Magnet übergeben.
Just a simple mesh box as you see in the photos. I made this to hold silica besiccant beads. Two variations, one has 4mm walls and 2mm holes. The other has 2mm walls and 1mm holes. Both cases the holes are spaced out with 1mm spacing on…
