66 models
A wall mount for the Marmitek Connect 621 UHD HDMI switch. Holes for the screws are 3mm in diameter, with a 4mm diameter drop to hide to top of the screws. The wall-side is made pretty beefy (18mm thick), but this fits my personal setup…
Print approx. €10.70–€13.07 excl. taxPreliminary estimate for PETGSource material: PET
1.3U rack mount for the Motorola MB8611 / MB8600 / MB7621 cable modem, with ventilated shelf and keystone jack. Also has a screw mount hole to mount the modem directly to the modem tray. You must remove the base/stand of the modem in…
This allows you to use non-proprietary batteries in your Hyper Go 1620X series RC car without resorting to a Velcro strap. It also retains compatibility with the stock proprietary batteries. It will accommodate batteries up to 35mm deep…
Rack mount for the Motorola MB8611 / MB8600 / MB7621 cable modem, with ventilated shelf and keystone jack. Also has a screw mount hole to mount the modem directly to the modem tray. You must remove the base/stand of the modem in order to…
My son wanted to sell his Beyblade stuff, and one leg of this arena was missing, and I thought lets waste time to remodel that thing. Lucky me one of the legs remained and I could use it as a measure model. It fits perfectly and was fun…
Battery retention arm model can be found here: https://www.printables.com/model/645510-hyper-go-16207-16208-16209-16210-battery-arm Designed to snuggly fit a 75 * 34 * 26.5mm or 2.95 * 1.34 * 1.04inch battery pack This is the battery…
This is a cable holder for several meters of charging cable with a nice place for the plug in the middle. Kind of like for a garden hose. Prints without supports. The two "bars" in the plug area should hold it a bit better with friction -…
Here you can find a holder for a charging plug IEC 62196 type 2 and a matching cable holder.
Typ 2 Stecker Abdeckung Type2 charging cable cover
I shortened the original 3rdpig design by 3mm and changed the threading to 1/4-20, because 'MERICA! and 1/4-20 bolts are a lot more common here in the states than M6. Cases cut without turning the setscrew in came out at 1.386", and after…
This model is compatible with the lego system.
This model is compatible with the lego system.
This design is for inspiration only (or static model). It is designed around components that are no longer sold. My brother and me owned a 1/10th scale RC buggy. After a few years and multiple crashes the body of the buggy was done and…
This model is compatible with the lego system.
lego 60800 60603 62113 6154 60621 2377 4863 6556 4035 60596 57894 60599 57895 60623 28327 42509 60806 80683 42205 60616 92589
IEC 62196 Type 2 Parallel Holder Well, actually not quite; the socket is pointing away from the wall at a 10 degree angle. The "wide base" version spaces the holes wider apart (30 mm instead of 20 mm). This version was never printed, so…
3D printed compas for DeWalt DW621 router. Compatible with originals 8mm rod.
Multiboard Mount for a KNIPEX 12 62 180 Wire Stripper You can find the editable original file in Onshape: https://cad.onshape.com But if you go this way, I would still appreciate a download and a like here.But if you go this way, I would…
This holder is narrow enough to gives enough grip to keep a plug in place, even when mounted vertically. In addition, a spring-loaded baffle prevents the plug from slipping out. I have made two versions: a shorter version with open holder…
This mount will allow you to attach a Motorola cable modem (models MB8611 / MB8600 / MB7621) horizontally and store in a 10-inch networking rack. Unscrew the base from the modem, lay on its side and attach screws through the side of the…
Doraz ke kleštím Knipex 1262180 , podobný originálu, trochu upravený pro lepší tisk. Materiál PLA ( mám lepší zkušenost než PET) tryska 0,4 vrstva 0,1 Menší trysku na vyzkoušení nemám. zkuste i s jiným nastavení a dejte mi vědět výsledek.…
Through the following link you will get access to my Amazon Store Front, where you will find the shopping list for each project and other product recommendations. https://www.amazon.com/shop/adriancubas As an Amazon Associate, I earn from…
IEC 62196 Type 2 notes The most complete specs I know are published by Phoenix Contact, who also offer CAD files for download: The nominal outer diameter of the plug's shroud is 63 mm and the height is 56 mm. The radius of the corners, I…
This grid based mounting plate is sized to fit the HB6217 from Jaycar and allows for flexible and easy mounting of hardware inside the enclosure without needing to use glue, drill or cut into the plastic of the box. I've used M3x8mm…
Charge cable hook designed for IEC 62196 'Mennekes' Type 2 connector to keep your cable off the ground. Specifically designed to fit a Mercedes Type 2 Mennekes branded cable but I guess it will fit many others as well. It is a (low)…
I printed it on creality ender 3 V3 SE. print time 3 mins, 0.4 mm nozzle. You can print it, if you loose this piece or want to build something new. Fits perfectly on other pieces
versastack / t-stack tray for icon 56211 deep impact sae sockets
The repair for a glass fridge shelf was designed for built in Hotpoint HUL1621 fridge, but may fit other fridges with 3.9mm thick glass. the repair is shown below with the gap “frigdefiller” part removed. The gap filler part clips over…
I've created this TPU cover for my Anker 621 Magsafe Battery. I've printed it in TPU using a 0.6mm nozzle, 0.3mm layer height, 2 perimeters and only some infill at the lower radius. For sure, you can re-slice it with your own parameters…
I could not find a case sized small enough to just enclose and protect the Anker 621 MagGo power bank. I saw Ariel 3D's TPU iPhone battery pack case and thought it would work out nicely if scaled to the right size. Printed mine in Sain…
trim .308 Winchester or 6.5 Creedmoor for resizing to 8.6 Blackout Suggest printing in orientation shown for best results Blender file included Category: Hand Tools
Best printed with the bottom side down, using tree support just for the teeth.
Needs bolts and nuts to assemble: 12x M5*12 12x M5 nut
A pad that sits in the phone charging slot to support an Anker 621 wireless charging pack. Designed for Ford Maverick. It printed well with nice softness with TPU at 10% infill.
A holder for the Shinwa 62103 Miter Rule/Miter Square for the IKEA SKADIS pegboard. Uses M2 x 12mm screws and nuts. BOM - M2 Version Qty Description 1 M2 DIN934 Hex Nut 1 M2 12mm Screw Printing I printed it with PLA, 25% infill, 6 wall…
This one is really special. It is a reproduction of a classic figure from the Heritage Miniatures Star Trek line, number 1621. (see…
This is a case for the HT1621, 7 segment LCD's, Sold in the uk by Hoby Components for just £3.99. https://hobbycomponents.com/newproducts/1001-ht1621-6-digit-7-segment-lcd-module The hobby components web site has a forum with the arduino…
Most Type 2 holders on the internet are traced from a photo or a caliper. This one is built from the dimensioned drawings in IEC 62196-2:2022, standard sheets 2-IIe and 2-IIf - and then corrected twice by actually printing it and hanging…
VW Passat 32b Abdeckkappe für Haltegriff / Angstgriff OEM 321 857 621 /A passend für: Derby II Golf II + Syncro + Country Jetta II + Syncro Passat B2 / 32B + Syncro Polo II + Polo II F Rallye Golf Santana
Sturdier remix of @loopj's MB8611 Rack Mount with LED light pipes and an SVG for laser etching the face. Wider gussets to reduce flex LED window removed and replaced with light pipes SVG for etching the face with the logo, LED icons, and…
LMK your thoughts plez its not perfect lol First use of CAD for 3D printing :D
I designed a wall mount for the Motorola MB7621. The top was designed in two pieces to allow the modem to be removed without removing the wood screws. It requires (1) 10-24 x ½" machine screw and nut. Two bottom mounts can be used if…
Part to mount my Vizio SB3621nb-G8 Soundbar to the bottom of my 32in Vizio E32h-C1 TV via the original leg holes. Print on its side, with the part which will fasten to the soundbar upright, No supports required. Used original leg screws…
Frame for Andream EW-BMEH-V621
The rear wing on the MJX 16212 might not do much for aerodynamics, but it definitely protects the body shell in a crash. Mine snapped after just a few bad landings. I created an easy to print flexible version. Made of TPU it will adapt to…
Holder for bit set as it does not come with a holder. Uses 10mm x 2mm magnets.
About Mount for a 1/4" pegboard system to accomodate the Craftsman cmht77621 stud finder Required Hardware: QTY 2 pegboard mounting screws for a 1/4" pegboard (size small)
364/363, SR621SW/SR621W battery case created using the OpenSCAD from the original model
This is a replacement bushing/spacer for the E28 speedometer module. Speedometer part number is 62121377617. The bushing has an ID of 6mm, OD of 9mm, and a height of 4mm. Print out of TPU.
This model is compatible with the lego system.
lego 60800 60603 62113 6154 60621 2377 4863 6556 4035 60596 57894 60599 57895 60623 28327 42509 60806 80683 42205 60616 92589
About Mount for a 1/4" pegboard system to accomodate the Craftsman cmht77621 stud finder Required Hardware: QTY 2 pegboard mounting screws for a 1/4" pegboard (size small)
This holder is narrow enough to gives enough grip to keep a plug in place, even when mounted vertically. In addition, a spring-loaded baffle prevents the plug from slipping out. I have made two versions: a shorter version with open holder…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
This model is compatible with the lego system.
The middle gear sometimes looses a tooth so this is a replacement part for it. The center hole should be 2.6mm but after printing drilling through with a 2.5mm or 2.6mm drill is recommended. I printed it with PLA but Nylon is preferred.
This model is compatible with the lego system.
John Deere 6215R This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as: wall decoration desk decoration gift for fans Category: Signs & Logos
ORGANIZZATORE GT621 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Combo Anycubic Kobra S1 Laser: Mecpow X3Pro 10W
Update Aug 2023: Now splittable for multimaterial There was an issue where the inner two objects were joined ever so slightly, which didn't affect printing but did affect the ability to split the parts in the slicer for multimaterial…
This is a travel case for a Cooler Master SK621 mechanical keyboard with two pushbutton latches. You will need a pen spring and a paper clip wire for the latches. I was heavily inspired by this Coolermaster SK621 Carry Case and this…
Fits for the Model IB-RD3621-C31. I guess it could also fit the IB-RD3621U3 which looks to have the same housing. Prints without supports. Face with the fan cut-out on the bed.
A smaller, more symmetrical version of my other HT1621 lcd case, You need to desolder or cut the right angle header pins on the lcd module, and solder on some 6 core wire, as shown in the 2nd photo (i used 8 core lan/network cable, using…
