Counting matching models…
UPDATED: Slightly larger tolerance (0.1mm diameter for the bearing balls). Choose random seams if you printer is not well-calibrated. I recently needed a slimmer ball bearing for a spinner project, so I did my own take on ball bearings to…
The blade length and hub measurements match the original, but I sort of eyeballed the angles of the fins. The hub fits snug, but should press on fine. I've been running this for a year in my shop and I can't tell a difference between the…
A highly visible (and in my opinion, super cool) set of wormhole tokens for use in Twilight Imperium 4th Edition. This is a multi-color remix of the wormhole gate tokens for Twilight Imperium 4 by Vypper on Thingiverse. Just set a color…
The default holders for this set aren’t very good, so I made new ones You can also stack all the bits on one side, which leaves room for other bits on the right. I also included a version with the ½" bit holder in place of one of the 1/8"…
I printed it with 50% infill, brim and supports addded to: The bottom face of the wings (not the inclined ones) The base circle The center square which is a bit above the ground the small gaps on the driver pins sticking out downside The…
I bought a used HP Thin Client T630 where the stand was missing. Since the stand is important for the passive ventilation, I designed this one myself. As with the original stand, it can be mounted for horizontal or vertical position. It…
This is a 300mm miter bar that fits the Skil TS6037-00 table saw. It has 5 holes in the top that I used for heat set inserts for an M5 bolt, but the Fusion file is available if you would like to do something different.
THIS DOES NOT FIT THE A6500 due to the larger grip. This is a sculpted handle for the Smallrig a6500 cage (fits a6000, a6300, a6400) that fits 3 fingers and allows your index finger to comfortably manipulate the power, shutter, and C1…
This is the exhale Adaptor that's design to fit with all my other filter capsule. It is designed to filter out the air you breath out, just incase if you got sick and this will prevent the virus from spreading. Print instructions Print…
This model is a drop-in replacement for the laser module's tinted acrylic window and slides directly over the laser's focusing lens. To achieve an airtight fit around the focusing lens, it is recommended to apply a few turns of Teflon…
I printed mine with slim tree supports and it came out perfect. If my work inspired you, a coffee would make my day. https://buymeacoffee.com/odemir
A 3d model caddy suitable for 2.5" HDD/SSD. Perks: compatible with Dell servers R610/630 (perhaps others too); the caddy can be easily plugged in and pulled out; has a little space for marker numbering or to put a sticker on it; allows to…
Simplified model of a remix. Reduced file size by 125x. The original STL is 250 mb, and the new STL is 1734kb. Also included a 3mf file. I made mine with a resin printer (Elegoo Mars 3 Pro) using Elegoo's ABS Like resin Originally found…
Assuming you're using the same (Geekworm X630) HDMI-CSI bridge (…
If you need dust protection (about P1) or an exhale filter (as per authority requirement) just print these out and attach any membrane material you have at hand, fasten with a wire and you are ready to go. Made for a friend of mine who…
a6700 Users - The Grip does not fit because of the reworked mode-switcher, use the following remix by @shoyler_79369 (UNTESTED) : Extended Grip Printing instructions: Use supports when printing the model, otherwise you will not be able to…
Ověřený tisk PET-G, vrstva 0,2 mm s 2 perimetry. Doporučuji postavit na podložku přední částí - otvorem pro střelu z hlavně. Podpěry nutné. Použil jsem organické.
The Thule Omnistor 6300 has a keder rail comparable in dimensions to the one in @Ezernal awning just on the internal side of the shade and neither his variant A nor B fit well. The concept of version B was maintained however the top was…
This thing breaks all the time and I got tired of buying replacements, so I modeled this. It works fine, still breaks like the original. spoiler: I purchased metal ones because I got tired of printing replacements.
This model is compatible with the lego system.
I would recommend printing with PETG at 0.15 layer height or less to achieve smoother surface. Part snaps in place.
Podstawka do miniPC, HP T630 Thin Client. - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i Facebooku Zapraszam: https://www.magazynowanie-energii.com - Lista wszystkich urządzeń, które posiadam Zapraszam…
Air rifle silencer for SLAVIA 630.
Air assist option for the NEJE N40630 laser with access to focus wheel. fits 5mmOD 2.5mm ID air assist tubing (tubing has air tight fit around inlet so no glue required) this was inspired by a few creators models but did not suit my needs…
Adapter to convert the Skil 1340AA Table Saw dust extraction port to camlock. I think 1340AA is the European version of the Skil 15 amp 10 inch saw (TS6307), no idea if it will fit but they look the same. For use with Peter H's Camlock…
Ich habe mir bei Obelink eine zweite Spannstange für die Markise geholt. Beim Original (das weiße Teil rechts auf dem Bild) von Thule war der passende Halter für die Befestigung der Stange auf der Kassettenseite dabei, bei der Stange von…
CZ: Model ke stažení v STEP Jedná se o model ložiska Model ložiska je pouze designová záležitost , není ověřeno jestli půjde model vytisknout!…
Use your Presto food dehydrator as a filament dryer, without any destructive changes that would interfere with using it for its original designed purpose. Concept inspired by thing #4856292 , but redesigned from scratch. I really liked…
Alternative base for the Makita DHS630 by TJDesign's “Guide rail adapter for Makita DSS501” The CAD-file is fully parametric, so if you need this for a different saw feel free to reach out with the dimensions and I will make a new version.
Simple laser pointer holder for Slavia Air Rifle.
This model is compatible with the lego system.
Design to put your Govee Immersion Camera on the Top of the LG 65UJ6309 Category: Video Games
Openings in the base are for easy cleaning and drying. On this page, you have access to two design files. One with straight outlines and the other with curved ones. For the second Philips trimmer stand, please check this link:…
Logo “SA-6300” utilisé pour personnaliser la mise en rack 19 pouce d'un amplificateur vintage Pioneer. PLA ou PLA+ Buse 0.4mm, hauteur de couche 0.2mm, remplissage 15% Changement de couleur prévu à 1.2mm “SA-6300” logo used to personalize…
Very easy print and assembly. Stand bolts into the projector with two M4 bolts and bolts together with four M4 socketed cap screws and nuts. does not cover any fans or ports, made for Vankyo v630w. I found that even though the manual says…
Little print usefull for the sewing girlfriend ! with space for sewing foots. Category: Tool Holders & Boxes
If you have old Andersen windows and the sash lift in the bottom pane broke, here's a model for your replacement. It has a good fit - not perfect, but I was happy. I tried to replicate the original as close as I could. Printed it with…
There's storage for everything on the table saw, but for the allen key/screwdriver. Not anymore! It fits on multiple places on the legs. Print in PETG for it's flexibility.
Der Fuß passt an einen HP ThinClient T630 und kann mit zwei M2 Schrauben von unten zusätzlich fixiert werden Zusätzlich kann der Fuß auf dem Regal festgeschraubt werden, muss aber nicht. The base fits an HP ThinClient T630 and can be…
Extended version of a hot shoe grip for a6000 series cameras. This allows for some access to mode knob while not interfering with the standard Sony eye piece cover. Pictures show how the model fits on an a6600 and an a6300.
Lučík pro vzduchovku Slavia 630. Jedná se o alternativu k originálnímu lučíku, pokud dojde ke ztrátě nebo poškození originálního lučíku. Upevnění pomocí dvou šroubů M5 s imbusovou hlavou - nutno dokoupit. Pro přední šroub je třeba do…
Remixed this from https://www.thingiverse.com/thing:6122834 to split the plate more evenly so it can be printed on an Ender 3 V2 Neo. Also adjusted the length by 2mm as original was noted to be 2mm short. Print Settings Printer Brand:…
I made this simple HDD cover for the Dell Latitude D620/D630 notebook because I couldn't find an existing STL for it. No Extra hardware needed Print Settings: Material: Anything works from the cheapest PLA to the most expensive PEEK Print…
This is a small case for the Wiznet EVB-Pico2 boards. It provides easy access to the two buttons but covers the LEDs (I printed it using transparent PETG). The pin headers are also covered, though there is some space above and below the…
I designed this to hang my respirator on to the wall when not in use. I didn't really see anything I liked when searching for one. Simple but effective Print Settings Printer Brand: Creality Printer: Ender-3 S1 Rafts: No Supports: No…
This was a many-variant project that required a lot of tweaking, and I'm still not sure if I got it right. If you run into issues, let me know and I can try to adjust. Print with the smallest nozzle and finest resolution you can have. I…
Wall mount for Lego Batmobile mini Tumbler (76303) no support needed chose the Wall Mount file with the direction of the car fix with double tape
Door mirror covers for late model Volvo 140,160 and early model 240. They are modeled after my best effort in Fusion 360, Im new to CAD so they are not totally 1:1 so feel free to remix and improve if you want to. They dont feature the…
This is a housing for a relay-board 2ph63083a. Category: DIY
This is a remix of the camera holder clamp only, to fit better in places up to 30mm wide (the original is only about 26mm wide). For the other parts, please use one of the original or remixed sources:…
This is a replacement for the battery strap and ESC mount of the Evader EXT2. The ESC mount will work with all Evader chassis, including the ST, ST Pro, EXT, etc but the strap will only work on an EXT2 or any other Evader that is already…
Small set of roller v-blocks I personally use for checking pipe for runout (note that my tolerances are pretty large, so a 3d printed block is fine for my use). Included a small bracket with mounting holes that the blocks fit in for…
This is a homemade USBC charging dock for a Sony MZ-E630 MD Player, also compatible with similar models that use a rechargeable NiMH gumstick battery and have a similar charging port. The dock may need to be modified to fit bulkier models…
Lever for raising the arm of the device.
Recambio de engranaje de nevera de marca LG para el dispensador de hielo. https://lgparts.com/products/mdt63027201
TRAXXIS 7630 Suspension Arm revised to be easily printable on an FDM printer. Use your slicer to mirror as needed. Mirroring is only needed for visual preference. An Index drill set will be useful to cleanout the printed bores.
I am not a 3D expert, nor a carpenter. I am giving it a try. Just made this alignment device. you can install one of those DIALs to check the BLADE ALIGNMENT. Hope it is useful (it was to me). I printer in PLA (sunlu). Using 25% infill. 3…
Fish themed keyrambit! It fits 6308 bearing :)
This is a 3D-printable version of the FEL-PRO 16300 crankshaft sleeve installation tool. Used to install the FEL-PRO 16250 crankshaft rear main seal sleeve on engines like the legendary pushrod 5.0L Ford V8 (among others). The center is…
Here you have two types of front sights for the Slavia 630 airgun. The first type is a standard open sight. The second type is designed to accommodate a 3 mm fiber optic rod insert. This second type is also provided in .f3d format for…
Sparepart for Roco-Car-Wagon Part-Nr.: 46330. Printer-Settings: Layerhight: 0,1mm Nozzle: 0.25mm Supports: Yes Use PCCF for best durability.
Made smol holder for my UGREEN CM630 4K USB capture card. Adhesive mounted. You have a choice of 2 options: V1 - less material but small adhesion area. V2 - needs more material but have larger adhesion area plus 3mm mounting holes if you…
I designed a combo 3D printed/CNC machined wheel for my Robomow RS630 when the plastic gear stripped in mine. I only have a Prusa Mini so I could not print an entire wheel but I do have a CNC router so I printed the center hub with the…
Easy to fit in. Maybe also useable for your shaver Have Fun, don´t hesitate to give a like or post a make picture. Open for any improvement ideas.- just send me a message. Category: Bathroom
Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 15+ Supports: No Print Orientation: Default as modeled Brim: Optional
The photo shows the original cover and a copy together with the tractor :-)
I printed and tried various air assists for my laser engraver but I found most of them too bulky so I chose the solution proposed by Tine Sedej ( https://www.thingiverse.com/tintek/designs ). To the laser anchored support (…
Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 60% Filament: Devil Design ABS Aluminium Category: Parts
Neje N4063 laser spacer from the base to be cut or engraved Print Settings Printer: Artillery Hornet Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 20 Infill: 20% Filament: xxx PLA xxx Category: 3D Printer Accessories
Adflo Battery Charging Station for M3 Adflo 837630 Insert Charging Cable in the Grove. Use 4 M3x20mm screws to connect the two parts of one Charging Station. Use 4 more screws to attatch a second Charging Station to the first one. Insert…
You may need to snip off two of the 2mm pins on top, depending on the mounting direction. This is the most likely part to break when moving the server.
Designed for StatementPatient7816 to fit their Hero 7.
This is the first version of my Wall-Mount for Proxxon Industrial Screwdriver Set 22630 (VDE). This set contains 6 single-piece holders for the VDE Screwdriver Set 22630 from Proxxon Industrial. 1x PH 2 1x PH 1 1x 6.5 1x 5.5 1x 4.0 1x 2.5…
Simple holder for RDM6300 RFID 125kHz reader module. It contains 3 parts, made of a 5 mm thick mat, and two holders. It is screwed with two M3 screws. There is an opening for a pin connector in the pad. I printed from green PLA, the…
This is for a GE dishwasher model number gdf630psm3ss silverware basket model number WD28X24476 AFTER A TEST RUN PETG IS STILL TOO SOFT AT THE DISHWASHER TEMPS. NEED TO USE A HIGH TEMP MATERIAL WITH HEAT RESISTANCE. I WILL BE PRINTING IN…
English: As I am currently building a pinball machine, I needed appropriate holders for the dual coils, e.g. for Williams/Bally FL-11630, FL-11629 . I couldn't find any here, so I quickly constructed some. I won't install them until…
Držák na sklo digestoře MORA OP 630 W
Ersatzteillager im Aufbau für altes Holzspielzeug zum selber drucken
Key features: .step files are provided: easy to modify and remix Perfect fitment: fits just like the original Printing: Material: basically anything works, from the cheapest PLA , to the most expensive PEEK Print settings: 0.3mm Layer…
I recreate https://www.printables.com/de/model/258932-govee-immersion-camera-on-lg-65uj6309 complete new in OpenSCAD to create sockets für any small things that i could put on top of my TV
I needed a case for my x630 circuit board in my Pi-KVM project so I made one in fusion 360 :)
NOTE: I apologize for the print quality in the pictures above. It's awful. I'm sorting out both the design and print settings to improve this. This is a work in progress. I am using the STLs uploaded here and they definitely work for me,…
You need to print it in TPU! The original design comes frome here: https://www.thingiverse.com/thing:5233243
Made this very simple lock holder for my ABUS 6300/90 Bordo. I upladed the step file as well so you can adjust it to your needs. i attached it with VHB tape but i added screw holes if you need those. Feel free to comment.
this support is used to clamp the drywall gun on its upper clip. the support is designed to be fixed under a shelf not on a vertical wall. the lower holes are used to pass a longer bit to screw the support.
Print with 0.1mm with the flat side on the sheet, might be some junk in the middle cross, should be easily removable with an allen key or knife. Tested on Coolermaster SK650 Cherry mx red Should work on other keyboards using cherry mx…
I have modded the stand here to include a GoPro mount, where i have added a 140 fan since i have 4 of the T630's and airflow troug the systems. It will go out the Left or Right siide. I have included a mount for the 140mm fan i have ended…
Southern Railway 630 is a 2-8-0 "Consolidation" type steam locomotive built in February 1904 by the American Locomotive Company (ALCO) of Richmond, Virginia for the Southern Railway as a member of the Ks-1 class. It is currently owned and…
I derived this gimmick from my design https://www.printables.com/de/model/287562. With this I can now place a knob stone plate 4X4 (e.g. BlueBrixx, Cada, Cobi, Lego) on my TV frame. Fits very well to put figures there.
Mein Drucker befindet sich in einem Anbau, wessen direkte Wand nicht 90° zum Drucker steht. Deshalb brauchte ich ein Scharniergelenk mit Aufnahme für die c630, um den Winkel an den Drucker anzupassen. Der Datei liegt auch eine passende…
Fan module designed for a HP T630 terminal. What you need is: 1. Two 40mm FANs. Im using 40/28mm 12V. 2. W1209 Cheap thermostat 3. M2/6 screws 4. 12V DC power supply Print with no supports. You can find the propper model orientation on a…
Williams Pinball 03-8630
Adapter for nice mounting of Vankyo V630W projector to Meliconi 400CE ceiling mount. Holes on mounting pad on Meliconi have 100mm pitch. For mounting you need: 4 pieces 6x14mm inbus screws with recessed head, 4 washers and 4 lock nuts…
This model is for creating a new replacement part for a Remington Model S-6300 Hair Straightener hinge cap. The piece fits both sides and simply clips in as per the original. The two prongs that clip in a pretty small - I had some printer…
Deutsch Ersatzteil - Multifunktionsstellknopf für Bernina Nähmaschinen des Modells artista 630 640. Drucken Zum Drucken habe ich PA11 Carbon Fibre verwendet für höchst mögliche Festigkeit. Der Druck mit MK4s erfolgte horizontal mit einer…
Connect your Ridgid shop vac to your Skil 10" Miter Saw (or any other tool that has a ~1.65" OD port)
*** I’m no longer posting to Thingiverse, or Updates. If you wish to see all my work and updates to items posted to Thingiverse please visit my personal website https://gallaghersart.com/design ,OR Google “GallaghersArt 3D” (GallaghersArt…
UPDATED VERSION 2/3 Mount for Diatone Tyrant 630 ,540, and 530 with an angle of 25 deg. V1 its too bouncy/flexible!! / dont waste time and filament V2 is much better. More Gopro contact surface and more stable with almost same weight. V3…
![Twilight Imperium Wormhole Tokens [thing:4866300 remix]](https://media.printables.com/media/prints/317986/images/2777025_a621fef1-5cb2-4840-9242-7b7df00b92aa/pxl_20221120_190403314.jpg)
