Counting matching models…
A beautiful flower vase for decorative purposes to hold artificial flowers. It is 165mm tall and 114mm wide. Print time approximately 5 hours 30 min. with a single wall. The photo shows the vase printed in vase mode. It can be printed in…
These are storage trays for different common batteries designed for the Gridfinity organization system by ZackFreedman These were all made using the Gridfinity Rebuilt project. I also increased the detail of the models beyond the default…
A compact, modular Bracket for DIY 18650 battery packs. Brackets easily click together, but hold firmly. If your battery is slightly thicker than usual, a bracket might crack while pushing the battery in. In that case just scale the model…
Summary: The 18650 cell holder is a 3D-printable component designed for securely holding 18650 lithium-ion cells. It combines a lightweight structure with high durability, making it perfect for DIY battery packs, electronics projects, and…
I attempted to use some 3D-printed 18650 spacers, but they weren't ideal. The injection-molded design you can get from aliexpress has two identical tabs on each side, which makes the other printed alternatives weaker. This updated module…
General This is a re-upload of my favourite battery holder solution from Thingiverse. The original from there is unfortunately gone (used to exist here https://www.thingiverse.com/thing:4906830 ) I have not made this model, but…
I have designed these dispensers to use my batteries in first in - first out order. You can stand these up on the table, or hang up using a standard 4 mm countersank screw or attach their back to anything using glue or 3M's Command Tape…
A simple snap-on 18650 battery holder.
I designed this to carry 15 18650 batteries. The battery divider is removable. It is a remix of https://www.thingiverse.com/thing:4757317. I re-designed the hinge and latch, made it thicker and to use M3 bolt. I used the latch from…
I couldn't find a decent pegboard mountable battery dispenser since most of them were split for easier printing and ended up being not very stable. fns720s dispensers looked like exactly what I was looking for except that they are meant…
The 18650 battery is a LiPo technology and extensively used in commercial and industrial applications. Here is my 3D model of another 18650 battery. If you're like me, it doesn't matter how much care you take, it's still possible to miss…
This design was inspired in 2 other designs in this site: https://www.thingiverse.com/thing:2339441 https://www.thingiverse.com/thing:2668159 Since I could not find for the original file to adapt it to my battery with protection circuit…
The case is based on my parameterizable “ Rugged Box ”. Support my work For non-Prusa parts and filaments, check out 3DJake ( International , UK , Germany , France ). I'll get a small cut of any order you fulfil using these links (at no…
Simple 18650 cell holder in the style of a beer crate. Holds up to 20 cells. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2mm Infill: 5% - 10% Notes: Can be printed without supports if your…
Simple 18650 brackets to store your batteries safely, brackets can be connected together using the tabs on the side. Printing The model should be printed with the front section on the build-plate (see the 3mf file) and can be printed…
Charger for 18650 with spot for a 17mm x 27mm TP4056 charger / protection module. Underneath the 18650 holder there is a channel to run 1-3 wires from the charging module to the second pole and or out the other end of the charger. There…
Please refer to the video for instructions : https://youtu.be/yzxPOTRFquc AA Battery Sheets (12x12mm 01) https://s.click.aliexpress.com/e/_DlyBLLt Shrink Tube https://s.click.aliexpress.com/e/_Ddri5N3
compact Charger for 18650 with spot for a 17mm x 27mm TP4056 charger / protection module under the Battery. Underneath the 18650 holder there is space for the TP4056 charger / protection module. There are two channels that can accommodate…
Depending on the filament and cell, 18.52 can be a bit tight. To add .1 mm of spacing, scale the original by 100.54 % (1.00539)
UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…
You can buy these from me here! Consider supporting us on Patreon! These are battery holders that can hold (2) 18650/(4) 18350, (2) 21700, (2) 26650, and (2) 26800. I print these out of PETG for the toughness. My builds use a 0.6mm nozzle…
I recently got hold of a couple of notebook batteries... ... So I needed a battery charge and test setup. I build a charger holder around my battery booklet thing: https://www.thingiverse.com/thing:4113164 This adds a piece for the TP4056…
Added additional versions; now includes battery holders for AA, AAA, C and 18650 cells (all printed and tested but the 18650 up to now) There is a perfect design out there like this for 18650 - couldn't find this for AA batteries.…
This is the H1+ case modified to fit common 18650 batteries and with added compatibility with the newer Heltec V4 module. Similar to my previous model. Made with the request of and help from: @JLO_2137313 Also added separately printable…
Inspired by this battery case. This battery holder doesn't require extra metal parts. Spring is integrated into the case. By default case has precise fit for 18650 cells and hold them well in place. It could be hard to remove cell , so,…
I needed a battery holder. One that doesn't have extra bits added onto it. Also, it had to have the cut-outs for a standard battery spring and clip setup. And I couldn't find one! So I modified Chrismettal's design to ditch the charging…
Simple 18650 case with no extra parts or caps to lose. Drop the battery in the bottom ring then tilt in and snap in place. Print instructions Category: Electronics Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter…
Remix of H1+ case for Heltec v4 with space for 2 x 18650 batteries in two versions - with lodgement or without it. Based on version for antennas up to 15mm in diameter at the base. Needs 2 M3x12 if you planning to use clamp. Best to use…
Low profile for easy removal. Designed around these inserts (not an affiliate link. Just for help finding the right parts) Amazon.com: VNDEFUL 30 Pairs AA Battery Positive Negative Conversion Spring Plate : Health & Household Wire routes…
I can't find any high current 18650 holders on the market... So, this is it. Just need some M3x6+6(20A) or M4x6+6(30A) brass standoffs. ~~copper standoffs~~ Update: V2 Many small improvements. Print Settings Resolution: 0.2mm Infill: 20%…
BOM: Printed with ROSA3D High Speed PLA Gray This is the "Double Row" edition of my battery holder set. It features grid configurations ranging from 2x2 up to 2x6, providing superior structural rigidity for larger battery packs compared…
Battery case for a single 18650 battery. I didn't like the other cases I found here so I made a better one. Nice big cap, chunky grip. The long thread makes it possible to fit protected batteries that might be longer than 65 mm. The…
Battery holders/dispensers for IKEA Skadis peg board. 18650 Holds up to 9 batteries, works with protected cells as well. Both sides need to be printed. Pegs in the holder are ofset by 20mm to mount properly and not take up too many peg…
Better to print from temperature resistant filament (ABS, PETg) and without supports
BOM: Printed with ROSA3D High Speed PLA Dark Blue This is the "Powerhouse" edition of my octagonal battery holder system. These 4-row wide grids are designed specifically for large-scale energy storage projects, such as home powerwalls,…
Hole for battery designed to be 18,4mm spacing is 22mm. Model consists of individual pieces that you can separate and use how many fits you. you could also pattern the same model how ever you like. If you want to make 3S6P like me you…
battery holder to create a battery field for 18650 battery
UPDATE 14.04.2024: Added “Battery pack activator” this little tool now enables you to activate your battery pack after swapping cells on the go. The BMS sadly shuts down every time you disconnect the battery and needs to be activated…
UPDATE: New version is up that includes less fiddly buttons, they print flat now and should be easier to glue into place. I made them a bit bigger too. Old version files included in /old. I wanted a portable case for my new Heltec Lora32…
This project is a custom-built foldable long-range FPV drone designed for efficient, extended flight times of up to 18 minutes. The frame is entirely 3D-printed and incorporates a unique folding mechanism for easy portability. The drone…
Battery case for two 18650 li-ion batteries. Savely carry your batteries and know witch ones are fully loaded by inserting the empty ones the other way round. For AA batteries click here. Update 2018-07-24: Uploaded the blender file…
Case with battery
Made these battery holders to store in our kitchen drawers. (STORES) AA Batteries AAA Batteries 18650 Batteries (DIMENSIONS IN MM) AA 60x130x58 (HxDxW) AAA 60x130x51 (HxDxW) 18650 60x130x74 (HxDxW) Walls are all 2mm thick How I Designed…
Holder for up to ten 18650 batteries I needed the hold to be strong. So beware, the battery packs pull out with some difficulty
Powerbank 21000 mAh with 18650 Li-Ion batteries. Part list: powerbank modul SW6208 (power rating of 22.5W) 6 Samsung INR18650-35E (6x3500 mAh) 2 screws M2x10 (for housing) 2 screws M2x5 silicone cable AWG18 silicone glue Advice: Fix the…
Battery tray for 18650 batteries. 17 battery capacity Print instructions Key for filenames E.g. {filename}_{s}_m{x}.stl filename = Name of part s = the number of the parts to print not mirrored. x = the number of parts to print mirrored…
It's about the most minimalistic 18650 holder you can imagine! The lid stays on with friction only. Designed to be printed on a Prusa MK3 with PETG at 0.2mm layer height. I've tested with Prusament and Atomic Filament PETG using the…
Print in TPU. Simple solution to cover both ends of an 18650, when carrying it loose in a backpack/toolkit to prevent from shorting on metal objects. Very lightweight, uses only about 2g of TPU per print. You can carry multiple caps with…
2x3 battery holder for 18650 Li-ion cells. Remix from : https://www.thingiverse.com/thing:4700523
Print Settings Printer brand: Anycubic Printer: Kobra 2 Supports: No Resolution: 0.2-0.3 Infill: 20%
Simple 18650 battery holder/hanger. Ready to use with commercially avaible electric contacts in size 12x12x0,2mm. See attached pictures. I added v2 of holder which is more rigid and holds battery more stable. EDIT 30.12.2022 I have added…
Modified this model to Include some clearance around the rear hinges, as I found that the case wouldn't open properly. Both the top and the bottom files have been modified, however, the original clip works fine. Happy printing : )
designed to be used in parallel, but can be wired in series if you ignore the polarity indicator. Use 8mm nickel strips cut to 50mm lengths to form the contacts. Bent in half, insert from top down through the two slots and bend inward or…
A holder for the TP4056 lithium Battery charging board (25*19mm). UPDATE:2018/10/01 V2 Fits most of TP4056 boards. Fits most of 18650 batteries with protection circuit. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill:…
Now comes in sizes up to 10! Took inspiration from the Battery Caddy, but in my opinion made it better. Here are my favorite features: Easy one handed battery removal Battery can be put in either way (positive side down or up) - use this…
Well, The dividers are overkill at 1.2mm, but it works really well sized for either a 0.4 or a 0.6 nozzle. I use the 0.6 nozzle. The previous version with grid/square like separators won't bind with the case well enough. The waves are the…
Just another 18650 Battery Case. Attention: This model only works for flat 18650 Cells. Check out the Remixes for slightly altered Versions, if you have non-standard 18650 Cells.
18650 cell holder for download, in several versions: 1x 2x 4x 8x the holder has space for the DS18B20 temperature sensor, and i used the original plates from such handles:…
18650 battery holder 1x4 4S1P. Remixed from : https://www.thingiverse.com/thing:4700523
Stackable 18650 Battery Beer Crate Simple to print model that prints without the need for supports and stacks with the other Stackable Beer Crates in this series. Holds 12 18650 batteries Print Settings Printer Brand: Prusa Printer: I3…
I wanted a case for my Heltec V3 that would be suited to carrying in a pocket or sitting on a desk while having a good battery life. This case is designed to be long in order to have the Heltec and 18650 end to end instead of stacked. I…
Description powered by AI: The container is designed to securely store a single 18650 battery and features sturdy knurled handles for easy handling. The lid of the container can be optionally equipped with an O-ring to provide a…
BOM: Printed with ROSA3D High Speed PLA Gray This is a practical set of spacers designed for building custom 18650 Li-Ion battery packs. The set includes linear strips ranging from 2 cells (1x2) up to 6 cells (1x6) . The Main Problem…
15W 3A 18650 Lithium Battery Charger Module DC-DC Step Up Booster UPS Uninterruptible Power Supply box case with good ventilation and cable hole 4 mm. threads are intended to be plastic only because you'll not screw up-down the device too…
I added a V4 that has small mounting pads to stick the GPS and Bluetooth antennae in case there are no enclosure walls within reach, or if you just wanted to keep it self contained and compact. meshtastic.org Case and setup inspired by:…
A simple hex key wrenches holder, attachable to case collator rod. Use M4 bolt + nut for clamp. Print instructions No supports, no brim, any layer thickness will do, infill 20 - 25%.
Case for unprotected (flat top) 18650. For 4, 3, 2, or 1 battery. How I Designed This Some tips In design I used 16x16.5mm contact spring plates like this: Soldering a contacts must be before assembling (take a care about plastic). The…
If you want a custom version made, please message me. I've been doing a lot of freelance design work, so my skills are very sharp right now. Can easily edit 3d models. this tray holds 48 lithium 18650 cells. i use this in my homemade…
18650 Battery Holder – Ready to Power Your Projects! This 3D-printable 18650 battery holder is designed for 18.5mm slide-in contacts (readily available on AliExpress) and is perfect for integrating 18650 cells into your projects. Whether…
Took the original and just tweaked it a little to remove some of the plastic. Still strong and functional, just a tiny bit quicker to print and lighter on the resources. The contacts: Keystone part number 209 I got mine from digikey part…
Gridfinity Battery Holder Lids –use them with your favourite 1x2 Gridfinity stacking containers , or use the included containers. No need to print out an entire container to hold a few batteries, these lids lock on to the stacking lip and…
I print them on 0.2 in PLA If the cap dont fit try enlarging it 0.1 or 0.2% 2024-03-18 Added a v2 to accommodate larger batteries
20 x 18650 connector for making a batterypack
The updated 18650 cell holder is a 3D-printable component designed for securely holding 18650 lithium-ion cells. This improved design includes an added battery stop for enhanced stability and a version with integrated connectors for…
Spare parts roller of LG Magic Remote AN-MR650A - works well small part of code wheel may require sanding depending on print accuracy
If you LIKE this model PLEASE hit so I get credit, this will encourage me to make more models like this, thanks! Case for the LILYGO LoRa32 V2.1_1.6 Board and 18650 LiPo Battery. I used this is for the MySondy GO Project:…
Remix from : https://www.thingiverse.com/thing:4700523
As the versions of a.m. shield are quite confusing, I built two versions. One for V3 I believe. The second for V8 of this battery shield. The Lid may fit to both versions The Knob is for V3. V8 may be equipped with it, I will add this…
Quick description: no spot weld or solder needed multiple holder can be connected together - just ziptie needed serial, paraler or both connection possible expansion module: for this time, just two powerbank module. Next module soon. some…
18650 accupack soldering/welding assisstant for accupacks up to 4x6
This case is Designed to Hold 18650 Battery Cells. You can Print this without Supports. Print Settings Printer: Sovol SV06 Plus Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 10% Filament: Elegoo Rapid PLA+ PLA+ White Notes:…
I designed this to keep my batteries safe from shorting out after charging. This is for the flat top 18650 battery but the button top ones will fit if you don't screw the lid down all the way. The pictures don't show it, but I have added…
I needed some holders for 5s pack to repair my drill battery so i made this simple model. Inside diameter is 18.3mm (mine fit perfectly, but it was too small for some cell so you might need to scale it up a bit), height is 10mm but you…
Like most things I design I had a need for this. This is a print-in-place case for 6 x 18650 batteries that uses minimal filament. It should print in one piece and come off the bed ready to go, there are small ribs to support the…
A heltec case designed to be small but have a bit more of a useable battery tray. Visit us: Gendemik.co.uk Newer stl files can be obtained at the link above. Tried and tested as a daily driver and used by a few of the UK NW meshtastic…
Some battery cases for 18650 batteries. The lids have a good snug fit, depends on filament used, layer hight and the accuracy of your 3D printer. Personally, I didn't have to adjust anything :) Feel free to adjust the dimensions in the…
18650 cell holder for download, in option: 1x2x4x8x I am adding two versions of these baskets for two different types of plaques available: V1 you need:…
Housing for the LiIon 18650 battery tester, charger, discharger. Consisting of three stl-files: Main Housing Safety Grid for the two power resistors (protects your and others hands) Three knobs for operation Printed on my MK3S+ in PLA,…
A snap on case for Heltec LoRa 32 V3.1. This model has an updated version that has better tolerances. Add a standard cheap 18650 holder and it's good to go. Battery holder size (with battery) 78mm*21mm*22mm. Print with PLA or PETG.…
Stackable 18650/21700 Holder. Inspired by another stackable beer crate battery holders. 20x 18650 / 12x 21700 can be stored. To stack the crates, Print 'HOLDERBOTTOM' and glue it under the crate. *The model may not be oriented correctly,…
This is an expanded version of Jason D Modular Battery Holder. I've made several changes to clean up all the “remixes” out there, make the modules truly standardised and “OCD friendly”. I was basically annoyed how different remixes…
This is a hexagon battery system, the idea is to be able to build a battery made up from 18650 cells to almost any shape you want using the modular connectors. You would still need to either spot-weld connection tabs to the batteries or…
This is designed to help prevent spills by adding support to the case as it indexes through the stations. The pins are integrated and should make it easy to replace if something happens. Category: Sport & Outdoors
This is a parametric model, you can open it in fusion and change a single parameter to add more cells. The electronic card model used here can be found here https://www.printables.com/model/686152-power-bank-control-card You can order it…
Can be handy if you decide to rewrap your batteries
My first contribution on Thingiverse and first design. This is a 3D printed USB Power bank based on MakerHawk 18650-Board (H961-U v3):…
This is an adapter so one can use common 18650 LiIon cells instead of 26650 cells in a tubular receptacle. It should be printed in vase mode. I printed the one in the photos at 0.34mm layer height and 0.4mm perimeter thickness. The cell…
This model is compatible with the lego system.
![Skadis Mountable Battery Dispensers (AA, AAA, 18650) [Remix]](https://media.printables.com/media/prints/249888/images/2246798_75dcb08f-f2a9-4a08-b0c6-adff86645ce4/skadis_battery_dispensers.jpg)
