Counting matching models…
Vertical stand for the Fritz!Box 6660 cable. Inspired by https://www.printables.com/model/43735-fritzbox-7590-stand If you have a different model check if it has the same housing. The diameter should be around 54.5mm
Seriously, I only needed the stand to place the Fritzbox 6670 vertically in the cabinet due to lack of space. The model should also work for the Fritzbox 6660.
This minimalistic vertical stand lets the FRITZ!Box 6660 cable modem stand fully upright like a skyscraper, instead of the long edge up like the other models I could find. This stand will friction fit around the modem and provide a flat…
This is a mounting bracket for 10" racks that holds the bare PCB of a FRITZ!Box 6660 Cable. It's recommended to have one 1U slot free before installing this. The FON1 and USB ports are sticking out of the PCB, so it has to be inserted in…
Small flashlight adapter that fits a standard GoPro mount, the flashlight snaps into place with some force applied. I created this to use on my PAPR for cleaning inside metal printers at work, but there are GoPro mounts for just about…
2 Höheneinheiten Modell muss wahrscheinlich im Slicer geschnitten werden. Gedruckt ohne Stützen
If printed connector is too narrow or too wide, You can change X and Y smaller or larger.
The Streamlight is tough as nails but the squishy bits didn't last. My goal wasn't fancy or elegant, just to replace them and have the ability to do it again in the future. The gasket is to protect the charging port and keep the front…
Hello! I used the following designs to create this mount: CR-10 Streamlight Microstream Holster by i_need_a_better_name on Thingiverse SKADIS Universal Hook - base and modified hooks by galvanization I printed at 100% infill in PLA with…
Printed right-side up with no supports.
Inspired by ohanhi design, I created my own 44mm variant stand with extended plateau for a better stand. The 6660 fritzbox gets sold in different variants. The rented versions are usually the bigger one, the 44mm version seems to be the…
Scanned with a Creality Raptor X and applied to Gridfinity via the Autodesk Fusion plugin. V2 has a slot for a USB-C to Micro USB adapter. I bought this one: https://www.amazon.com/dp/B0CDP9JWVY
Inspired by ohanhi design, I created my own 44mm variant stand with extended plateau for a better stand. The 6660 fritzbox gets sold in different variants. The rented versions are usually the bigger one, the 44mm version seems to be the…
Hello! I used the following designs to create this mount: CR-10 Streamlight Microstream Holster by i_need_a_better_name on Thingiverse SKADIS Universal Hook - base and modified hooks by galvanization I printed at 100% infill in PLA with…
